Fiber Optic Transmission
Run fiber for ultra-long, interference-free links with our fiber optic transmission lineup. Convert copper to SFP or single-/multimode with fiber converters; carry video, audio, and data across distance with dedicated fiber transmitters and fiber receivers; aggregate channels using fiber multiplexers; and stretch HDMI/IP with fiber extenders. For paired point-to-point kits, see transmitter & receiver sets. Build resilient backbones with low latency and EMI immunity.
Featured Fiber Optic Transmission Manufacturers
- $1,707.99SKU: FDC80TS1-C
Comnet FDC80TS1-C 8-Channel Supervised Contact Closure
- Microprocessor-based logic and latching relays in receiver unit eliminate random contact closure status in the event of loss of link or loss of prime operating power.
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
- ComFit standard form factor is interchangeable between stand-alone or rack mount use.
- Standard ComFit models are hot-swappable.
$1,707.99Low Price Guarantee - $1,699.00SKU: FTD4S1FC
Pelco FTD4S1FC 4 Channel FC Fiber Transmitter Bidirectional Data, Single Mode
- 4 Bidirectional Data Channels Support RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication
- Single-Mode Support for Distances up to 69 km (42.9 mi)
- Laser Diode for Transmission of Optical Signals
- Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
- LED Status Indicators for Monitoring All Critical Operating Parameters
$1,699.00Low Price Guarantee - $1,693.00SKU: FDC80NLRM1
Comnet FDC80NLRM1 8-Channel Supervised Contact Closure Receiver (Non-Latching)
- Transmits up to eight independent supervised or unsupervised dry switch or relay contacts over one optical fiber, or via a 2-wire RS-485 point-to-point copper circuit
- Indicating LEDs for monitoring power, contact closure status, and summary fault
- Automatic resettable solid-state current limiters
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount use - ComFit
$1,693.00Low Price Guarantee - $1,689.10SKU: MR-94P8-SL
American Fibertek MR-94P8-SL Single Fiber Transceiver 4 Digital Video & 1 Digital Bi-directional Audio
- Compatible with NTSC; RS-170A, RS-343A and PAL
- Real-time 10-bit video
- Real-time 24-bit audio
- Diagnostics: Video, Audio, Power & Optical Presence
- Line Level Audio Interface
$1,689.10Low Price Guarantee - $1,676.00SKU: MT-89CA-AX
American Fibertek MT-89CA-AX Single Channel Digital Video Transmission System, Multimode, Module Transmitter
- Compatible with NTSC; RS-170A & RS-343A,PAL, and SECAM
- 10 Bit Digital Video Transmission
- Diagnostics: Video,DC Power,Audio,andContact Closure Activity,Digital Frame Sync,and Optical Presence
- Serial Digital Transmission
- Available with Enhanced ″Afinety″ Intelligent Monitoring System
$1,676.00Low Price Guarantee - $1,676.00SKU: MR-89CA-AX
American Fibertek MR-89CA-AX Module Receiver Multi Mode
- Compatible with NTSC; RS-170A & RS-343A, PAL, and SECAM
- 10 Bit Digital Video Transmission
- Serial Digital Transmission
- Available with Enhanced ″Afinety″ Intelligent Monitoring System
$1,676.00Low Price Guarantee - $1,676.00SKU: MR-91P589C
American Fibertek MR-91P589C Digital Video/ MPD, Audio & CC, 12dB, 4KM
- Compatible with NTSC; RS-170A & RS-343A, PAL, and SECAM
- 10 Bit Digital Video Transmission
- Serial Digital Transmission
- Switch Selectable Terminations
- Available with Enhanced ″Afinety″ Intelligent Monitoring System
$1,676.00Low Price Guarantee - $1,676.00SKU: MR-91P99C-SL
American Fibertek MR-91P99C-SL 10 Bit Video / 2 Contact Module Receiver, Single Mode 1 Fiber
- 10 Bit Video / 2 Contact Module Rx
- 1310/1550nm 12dB 4Km
- Single Mode 1 Fiber
$1,676.00Low Price Guarantee - $1,676.00SKU: RT-91P999C
American Fibertek RT-91P999C 10 Bit Video / 3 Contact Rack Card Transmitter Multi-Mode 1 Fiber
- 10 Bit Video / 3 Contact Rack Card Transmitter
- 1310/1550nm 12dB 4Km
- Multi-Mode 1 Fiber
$1,676.00Low Price Guarantee
Fiber Optic Transmission Frequently Asked Questions
What is fiber optic transmission in surveillance systems?
Fiber optic transmission refers to the use of fiber optic cables to transmit video and data signals over long distances with minimal signal loss. This technology is highly advantageous for surveillance systems, as it provides high bandwidth, resistance to electromagnetic interference, and secure data transmission, making it ideal for high-security environments.
How far can fiber optic transmission extend for surveillance cameras?
The distance for fiber optic transmission can vary significantly depending on the type of fiber used and the equipment specifications. Generally, single-mode fiber can transmit signals up to 40 kilometers or more, while multi-mode fiber typically supports distances of up to 2 kilometers. This makes fiber optic systems suitable for extensive surveillance networks.
What are the benefits of using fiber optics for video surveillance?
Using fiber optics for video surveillance offers several benefits, including higher data transmission rates, longer transmission distances without signal degradation, and immunity to electromagnetic interference. Additionally, fiber optic cables are more secure against tapping, making them a preferred choice for sensitive surveillance applications.
Are there specific types of fiber optic cables for surveillance systems?
Yes, there are two main types of fiber optic cables used in surveillance systems: single-mode and multi-mode. Single-mode fibers are designed for long-distance transmission and have a smaller core, while multi-mode fibers are suitable for shorter distances and have a larger core. The choice depends on the specific requirements of the surveillance setup.
What should I consider when choosing fiber optic equipment for my surveillance system?
When selecting fiber optic equipment, consider factors such as compatibility with existing surveillance cameras, the required transmission distance, environmental conditions, and the type of data being transmitted. Additionally, ensure that the equipment complies with relevant standards and offers features like surge protection and ease of installation.
Filter
Shopping Options
