Power
- $379.68SKU: BGM1500-US
APC BGM1500-US Back-UPS Pro for Gaming, 1500VA/900W, Tower, 120V
- Replacement battery (1) is available
- Pure sine wave ouptut provides cleanest signal for active PFC servers and electronics
- AVR corrects voltage variations to provide reliable power
- Reactor circle visually alerts of remaining power, surges, dips, power outages, and building wiring faults
- 2 USB smart charging ports (Type A + C) to plug in your wireless gaming devices and mobile phone
$379.68Low Price Guarantee - was $738.17 Special Price $497.00SKU: AL602ULADA
Altronix AL602ULADA NAC Power Supply, 2 Class A or 4 Class B Outputs, 24VDC @ 6.5A, 115VAC, Red BC400 Enclosure
- Short circuit and thermal overload protection
- Built-in charger for sealed lead acid or gel type battery backup
- Zero voltage drop upon transfer to battery backup
- AC input and DC output LED indicators
- AC fails supervision
was $738.17 Special Price $497.00Low Price Guarantee - $16.75SKU: LPD
Altronix LPD Low Power Disconnect Module
- Input voltage: 12VDC or 24VDC max. 8 amps
- Low voltage cutoff: 12VDC: 10.5 volts (+/--- 0.3 volts) 24VDC: 20 volts (+/--- 0.3 volts)
- Restore voltage threshold: 12VDC: 11.5 volts (+/--- 0.3 volts) 24VDC: 23 volts (+/--- 0.3 volts)
- Relay contact rating 8 amp max
$16.75Low Price Guarantee - $26.00SKU: CC7200
ENS CC7200 AC24-12VDC Converter
- 16-28V AC to 12V DC Converter
- 1500mA
- Voltage Stabilizer built-in
$26.00Low Price Guarantee - was $798.00 Special Price $460.00SKU: VIS-REDUNDANTPS
InVid VIS-REDUNDANTPS Vision Redundant Power Supply for 64 & 128 NVR
- Vision redundant power supply for 64 & 128 NVR
was $798.00 Special Price $460.00Low Price Guarantee - $274.00SKU: STRIKEIT1B2
Altronix STRIKEIT1B2 Access Power Controller Strikeit1B-STRIKEIT1 Board
- Access power controller Strikeit1B-STRIKEIT1 board
$274.00Low Price Guarantee - $979.71SKU: D200-277-4803Y
Ditek D200-277-4803Y 200KA/ø, 100kA, Mode Surge Protective Device
- 200,000 Amp/phase surge current rating ensures long service life
- Compact size enables close mounting to the protected panel to minimize wire length and maximize performance
- Diagnostic LED indicates system power and SPD function, Alarm and ground status
- Dry Contacts for remote monitoring
- Available in 7 voltage configurations
$979.71Low Price Guarantee - $549.95SKU: NPD-9501-E
IQsight by Bosch NPD-9501-E 95W 1 Port Outdoor Midspan
- Designed for outdoor installation
- Supports high-power PoE/PoH
- Lightning suppression
- Detects and protects non-standard Ethernet terminals automatically
$549.95Low Price Guarantee - $160.00SKU: AQD1
Securitron AQD1 1 Amp, Dual Voltage Power Supply with Enclosure
- All combinations of AQ power supplies and distribution boards are UL listed
- Dual voltage 12 or 24 VDC field selectable continuous output
- Up to 82% efficiency which results in decreased operating costs and lengthens the lifespan of electronics
- Tolerates brownout or over voltage input ±15% of nominal voltage
- Thermal shutdown protection with auto restart
$160.00Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.
Filter
Shopping Options
