Fiber Optic Transmission
Run fiber for ultra-long, interference-free links with our fiber optic transmission lineup. Convert copper to SFP or single-/multimode with fiber converters; carry video, audio, and data across distance with dedicated fiber transmitters and fiber receivers; aggregate channels using fiber multiplexers; and stretch HDMI/IP with fiber extenders. For paired point-to-point kits, see transmitter & receiver sets. Build resilient backbones with low latency and EMI immunity.
Featured Fiber Optic Transmission Manufacturers
- was $2,300.00 Special Price $1,828.00SKU: MT-91P555C-SL
American Fibertek MT-91P555C-SL 10 Bit Video / 3 MPD Data Module Transmitter Single Mode 1 Fiber
- 10 Bit Video / 3 MPD Data Module Tx
- 1310/1550nm 12dB 4Km
- Single Mode 1 Fiber
was $2,300.00 Special Price $1,828.00Low Price Guarantee - $1,827.99SKU: FRV10D1A2M1ST
Pelco FRV10D1A2M1ST 1 Channel Bi-Directional Receiver with ST Connector, Multimode
- Multimode Fiber Support for Distances up to 4 km (2.5 mi)
- Exceeds All Requirements for the EIA RS-250C Short-Haul Transmission Specification
- Laser Diode for Transmission of Optical Signals
- Compatible NTSC, PAL, and SECAM Video Standards
- Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
$1,827.99Low Price Guarantee - $1,786.95SKU: FRV10D1A2S1ST
Pelco FRV10D1A2S1ST 1 Channel Bi-Directional Receiver with ST Connector, Single Mode
- Single-Mode Support for Distances up to 48 km (29.8 mi)
- Exceeds All Requirements for the EIA RS-250C Short-Haul Transmission Specification
- Laser Diode for Transmission of Optical Signals
- Compatible NTSC, PAL, and SECAM Video Standards
- Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
$1,786.95Low Price Guarantee - $1,738.00SKU: VT1920WDM
GE Security Interlogix VT1920WDM FM Video Transmitter / Data Transceiver, MM Laser, 1 Fiber
- NTSC, PAL, SECAM Compatible
- NTCIP Compatible
- Supports Contact Closures, 24V AC/DC, 170ma - Optically Isolated
- Optical Loss Relay Output
- Supports RS-232, RS-422, RS-485 (Tri-State 2 or 4-Wire)
$1,738.00Low Price Guarantee - $1,722.79SKU: FTD1S1FC
Pelco FTD1S1FC 1 Channel FC Fiber Transmitter, Single Mode
- Bidirectional Data Channel That Supports EIA RS-232C/D, RS-422/RS-485 (2-wire/4-wire) with Tri-State, Manchester, and Bi-Phase Communication
- Single-Mode Support for Distances up to 69 km (42.9 mi)
- Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
- Laser Diode for Transmission of Optical Signals
- Voltage Transient Protection on All Power and Signal Input/Output Lines
$1,722.79Low Price Guarantee - $1,722.79SKU: FTD1S1ST
Pelco FTD1S1ST 1 Channel ST Fiber Transmitter, Single Mode
- Bidirectional Data Channel That Supports EIA RS-232C/D, RS-422/RS-485 (2-wire/4-wire) with Tri-State, Manchester, and Bi-Phase Communication
- Single-Mode Support for Distances up to 69 km (42.9 mi)
- Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
- Laser Diode for Transmission of Optical Signals
- Voltage Transient Protection on All Power and Signal Input/Output Lines
$1,722.79Low Price Guarantee - $1,718.50SKU: FTV10D1A2S1ST
Pelco FTV10D1A2S1ST 1 Channel Video Fiber Transmitter ST Connector, Single Mode
- 1 Bidirectional Contact Closure
- Single-Mode Support for Distances up to 48 km (29.8 mi)
- Exceeds All Requirements for the EIA RS-250C Short-Haul Transmission Specification
- Laser Diode for Transmission of Optical Signals
- Compatible NTSC, PAL, and SECAM Video Standards
$1,718.50Low Price Guarantee - $1,707.99SKU: FDC80TS1-C
Comnet FDC80TS1-C 8-Channel Supervised Contact Closure
- Microprocessor-based logic and latching relays in receiver unit eliminate random contact closure status in the event of loss of link or loss of prime operating power.
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
- ComFit standard form factor is interchangeable between stand-alone or rack mount use.
- Standard ComFit models are hot-swappable.
$1,707.99Low Price Guarantee - $1,699.00SKU: FTD4S1FC
Pelco FTD4S1FC 4 Channel FC Fiber Transmitter Bidirectional Data, Single Mode
- 4 Bidirectional Data Channels Support RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication
- Single-Mode Support for Distances up to 69 km (42.9 mi)
- Laser Diode for Transmission of Optical Signals
- Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
- LED Status Indicators for Monitoring All Critical Operating Parameters
$1,699.00Low Price Guarantee
Fiber Optic Transmission Frequently Asked Questions
What is fiber optic transmission in surveillance systems?
Fiber optic transmission refers to the use of fiber optic cables to transmit video and data signals over long distances with minimal signal loss. This technology is highly advantageous for surveillance systems, as it provides high bandwidth, resistance to electromagnetic interference, and secure data transmission, making it ideal for high-security environments.
How far can fiber optic transmission extend for surveillance cameras?
The distance for fiber optic transmission can vary significantly depending on the type of fiber used and the equipment specifications. Generally, single-mode fiber can transmit signals up to 40 kilometers or more, while multi-mode fiber typically supports distances of up to 2 kilometers. This makes fiber optic systems suitable for extensive surveillance networks.
What are the benefits of using fiber optics for video surveillance?
Using fiber optics for video surveillance offers several benefits, including higher data transmission rates, longer transmission distances without signal degradation, and immunity to electromagnetic interference. Additionally, fiber optic cables are more secure against tapping, making them a preferred choice for sensitive surveillance applications.
Are there specific types of fiber optic cables for surveillance systems?
Yes, there are two main types of fiber optic cables used in surveillance systems: single-mode and multi-mode. Single-mode fibers are designed for long-distance transmission and have a smaller core, while multi-mode fibers are suitable for shorter distances and have a larger core. The choice depends on the specific requirements of the surveillance setup.
What should I consider when choosing fiber optic equipment for my surveillance system?
When selecting fiber optic equipment, consider factors such as compatibility with existing surveillance cameras, the required transmission distance, environmental conditions, and the type of data being transmitted. Additionally, ensure that the equipment complies with relevant standards and offers features like surge protection and ease of installation.
Filter
Shopping Options
