MuxLab Fiber Optic Transmission
Run fiber for ultra-long, interference-free links with our fiber optic transmission lineup. Convert copper to SFP or single-/multimode with fiber converters; carry video, audio, and data across distance with dedicated fiber transmitters and fiber receivers; aggregate channels using fiber multiplexers; and stretch HDMI/IP with fiber extenders. For paired point-to-point kits, see transmitter & receiver sets. Build resilient backbones with low latency and EMI immunity.
Featured Fiber Optic Transmission Manufacturers
Filter
- $2,463.40SKU: 500764-TX-V2
MuxLab 500764-TX-V2 HDMI Over IP H.264/H.265 PoE Transmitter, 4K/60
- Supports up to 4K @ 60Hz video resolution
- Extends local audio/video transmission up to 330ft (100m) over Cat5e/6
- H.264/265 video codec, excellent for LAN and Internet transmission
- High image quality and 200ms latency in low latency mode with H.265
- Supports Multicast, RTSP, RTMP, HLS, FLV, and TS PoE powered, via PoE (PSE) Ethernet Switch
$2,463.40Low Price Guarantee - $848.00SKU: 500860
MuxLab 500860 HDMI over IP PoE Seamless Transceiver, 4K30
- Supports up to 4K @ 30Hz video streams
- H.264/265 video codec, excellent for LAN and Internet transmission
- High image quality and ~80ms latency
- Supports seamless switching
- This unit is a Transceiver and can be used as a Transmitter, as a Receiver, or as both simultaneously
$848.00Low Price Guarantee - $555.96SKU: 500762-RX-V2
MuxLab 500762-RX-V2 HDMI Over IP H264/H265 PoE Receiver, 4K60
- Supports up to 4K @ 60Hz (4:4:4) video streams
- Supports up-scales 1080p @ 60Hz video streams from Transmitter and other devices up to 4K @ 60Hz
- Supports Video Wall and Multiview capabilities
- H.264/265 video codec, excellent for LAN and Internet transmission
- Supports SPDIF (TosLink) Audio Out
$555.96Low Price Guarantee - $6,334.00SKU: 500732-SM80
MuxLab 500732-SM80 6G-SDI Extender Over Fiber Optic (SM 80km)
- Supported modes: SMPTE 292M, SMPTE 296M, SMPTE 372M, SMPTE 424M, SMPTE 425M
- Supports all 6G channel configurations (1, 2, or 4 BNC)
- Automatic SDI Link recognition and configuration
- USB interface for field upgradable firmware and diagnostics
- Standard SFP+ module for optical fibre interface, or other media
$6,334.00Low Price Guarantee - $5,703.11SKU: 500734-SM80
MuxLab 500734-SM80 6G-SDI Extender Over Fiber Optic With Return Channel (Up to 49.7 mi)
- Extend up to 4K @ 30Hz resolution from 300m to 80km over multimode or singlemode fiber
- Supports multichannel transmission, and can simultaneously transmit up to 9Gbps of data
- Accepts mixed signal transmission of up to one 6G-SDI signal + one 3G-SDI, or two 3G-SDI signals + two HD-SDI signals, and many other combinations in any direction, including the return channels
- Supports one input and one output SDI port, plus three configurable directional SDI ports
- Supports RS232 pass-through for remote control and as a return channel for tally light and camera control unit (CCU)
$5,703.11Low Price Guarantee - $5,026.24SKU: 500734-SM40
MuxLab 500734-SM40 6G-SDI Extender Over Fiber Optic With Return Channel (Up to 24.9 mi)
- Extend up to 4K @ 30Hz resolution from 300m to 80km over multimode or singlemode fiber
- Supports multichannel transmission, and can simultaneously transmit up to 9Gbps of data
- Accepts mixed signal transmission of up to one 6G-SDI signal + one 3G-SDI, or two 3G-SDI signals + two HD-SDI signals, and many other combinations in any direction, including the return channels
- Supports one input and one output SDI port, plus three configurable directional SDI ports
- Supports RS232 pass-through for remote control and as a return channel for tally light and camera control unit (CCU)
$5,026.24Low Price Guarantee - $4,642.04SKU: 500732-SM40
MuxLab 500732-SM40 6G-SDI Extender over SM Fiber Kit Single-Mode
- Supported modes: SMPTE 292M, SMPTE 296M, SMPTE 372M, SMPTE 424M, SMPTE 425M
- Accepts up to four HD-SDI feeds, two 3G-SDI feeds or one 6G-SDI feed
- Supports all 6G channel configurations (1, 2, or 4 BNC)
- Automatic SDI Link recognition and configuration
- USB interface for diagnostics and field upgradable firmware
$4,642.04Low Price Guarantee - $3,881.00SKU: 500734-SM10
MuxLab 500734-SM10 6G-SDI Extender Over Fiber Optic With Return Channel (Up to 6.2 mi)
- Extend up to 4K @ 30Hz resolution from 300m to 80km over multimode or singlemode fiber
- Supports multichannel transmission, and can simultaneously transmit up to 9Gbps of data
- Accepts mixed signal transmission of up to one 6G-SDI signal + one 3G-SDI, or two 3G-SDI signals + two HD-SDI signals, and many other combinations in any direction, including the return channels
- Supports one input and one output SDI port, plus three configurable directional SDI ports
- Supports RS232 pass-through for remote control and as a return channel for tally light and camera control unit (CCU)
$3,881.00Low Price Guarantee - $3,839.00SKU: 500775-2110
MuxLab 500775-2110 12G-SDI/ST2110 Over IP Gateway TRX
- Supports SMPTE ST-2110 uncompressed 12G-SDI video up to 4K@ 60Hz
- Supports SMPTE ST-2022-7 (Class D, supporting up to 150usec delay with no frame lose) AV signal Redundancy (Seamless Protection Switching)
- Extend SDI audio/video over an IP network up to 6.2 miles (10km)
- This device is a Transceiver and can be configured as a Transmitter (Encoder), or Receiver (Decoder)
- This device can be used over 25Gbps Network or 10Gbps Network
$3,839.00Low Price Guarantee
Fiber Optic Transmission Frequently Asked Questions
What is fiber optic transmission in surveillance systems?
Fiber optic transmission refers to the use of fiber optic cables to transmit video and data signals over long distances with minimal signal loss. This technology is highly advantageous for surveillance systems, as it provides high bandwidth, resistance to electromagnetic interference, and secure data transmission, making it ideal for high-security environments.
How far can fiber optic transmission extend for surveillance cameras?
The distance for fiber optic transmission can vary significantly depending on the type of fiber used and the equipment specifications. Generally, single-mode fiber can transmit signals up to 40 kilometers or more, while multi-mode fiber typically supports distances of up to 2 kilometers. This makes fiber optic systems suitable for extensive surveillance networks.
What are the benefits of using fiber optics for video surveillance?
Using fiber optics for video surveillance offers several benefits, including higher data transmission rates, longer transmission distances without signal degradation, and immunity to electromagnetic interference. Additionally, fiber optic cables are more secure against tapping, making them a preferred choice for sensitive surveillance applications.
Are there specific types of fiber optic cables for surveillance systems?
Yes, there are two main types of fiber optic cables used in surveillance systems: single-mode and multi-mode. Single-mode fibers are designed for long-distance transmission and have a smaller core, while multi-mode fibers are suitable for shorter distances and have a larger core. The choice depends on the specific requirements of the surveillance setup.
What should I consider when choosing fiber optic equipment for my surveillance system?
When selecting fiber optic equipment, consider factors such as compatibility with existing surveillance cameras, the required transmission distance, environmental conditions, and the type of data being transmitted. Additionally, ensure that the equipment complies with relevant standards and offers features like surge protection and ease of installation.
Filter
Now Shopping by
Shopping Options 