Fiber Optic Transmission
Run fiber for ultra-long, interference-free links with our fiber optic transmission lineup. Convert copper to SFP or single-/multimode with fiber converters; carry video, audio, and data across distance with dedicated fiber transmitters and fiber receivers; aggregate channels using fiber multiplexers; and stretch HDMI/IP with fiber extenders. For paired point-to-point kits, see transmitter & receiver sets. Build resilient backbones with low latency and EMI immunity.
- was $1,045.24 Special Price $1,035.00SKU: MX-481T-1F-SL-SC
American Fibertek MX-481T-1F-SL-SC Drop and Repeat RS485 Transceiver, 1550nm
- Drop and Repeat Network Architecture
- Data Re-clocking
- DC to 200 Kb/s
- Activity LED Indicators for Data Tx and Rx for each Channel
- Optical Level LED Indicators
was $1,045.24 Special Price $1,035.00Low Price Guarantee - was $51.50 Special Price $51.00SKU: P1A2K
Altronix P1A2K Small Form-Factor Pluggable Single-Mode Transceiver Works with P1B2K
- Spans distances up to 2km (6561 ft.)
- Conforms to (SFP) Small Form-Factor Pluggable Multi-Source Agreement (MSA)
was $51.50 Special Price $51.00Low Price Guarantee - was $970.00 Special Price $961.00SKU: MT-1690E
American Fibertek MT-1690E Single Channel Video with Up-the-Coax PTZ Control & (1) Bi-Directional RS422 or Contact Closure or Audio Channel
- Diagnostics: Power, Video and Optical Presence
- Compatible with NTSC; RS-170A & RS-343A and PAL
- Video with Reverse Up-the-Coax PTZ over one Multimode Fiber
- PFM Video Transmission
was $970.00 Special Price $961.00Low Price Guarantee - was $998.00 Special Price $989.00was $998.00 Special Price $989.00Low Price Guarantee
- was $1,381.00 Special Price $1,371.00SKU: RR-9P89C
American Fibertek RR-9P89C Multi-protocol Bi-directional Audio & Contact Rack Card Receiver 12dB, Multi-Mode 1 Fiber
- 24Bit Digital Audio
- Diagnostics: Audio, Data, Contact, Power & Optical Presence
- Automatic Resettable Fuses on Power Lines
was $1,381.00 Special Price $1,371.00Low Price Guarantee - was $1,289.00 Special Price $1,280.00SKU: MT-82-280
American Fibertek MT-82-280 Sixteen Contact Module Transmitter, Multi-Mode, Non Latching
- 16 Channels, Form-C (Normally Open or Normally Closed) Dry Contact Closure
- Latching Relays reduce power requirement
- User-Selectable feature maintains Contact Status through Power-Cycle and Loss-of-Optical-Power
- User Control to Reset all Contact Status
- Diagnostics: Power, Optical Presence and Channel Indicators
was $1,289.00 Special Price $1,280.00Low Price Guarantee - was $2,197.00 Special Price $2,187.00SKU: MTX-986C
American Fibertek MTX-986C 8-Ch, 10-Bit Digital Video/ Multi-Protocol Data & CC, 12dB, 1KM
- Compatible with NTSC, (RS - 170A & RS -343A),PAL and SECAM
- 10 Bit Digital Video Transmission
- Diagnostics: Video, DC Power, Data Activity,Frame Sync, Optical Presence
- Serial Digital Transmission
- Full Color, Real Time Video Transmission
was $2,197.00 Special Price $2,187.00Low Price Guarantee - was $677.00 Special Price $676.00SKU: FDX60M2
Comnet FDX60M2 RS232/422/485 2 & 4W Bi-directional Universal Data Transceiver, mm, 2 Fiber
- Meets EIA RS232C/D and RS422/RS485 (2 or 4-wire) specifications
- Wide optical dynamic range: optical attenuators are never required
- Indicating LEDs display equipment operating status
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount use - ComFit
was $677.00 Special Price $676.00Low Price Guarantee - was $14,769.00 Special Price $14,760.00SKU: RR-95600C-SL
American Fibertek RR-95600C-SL 56-Channel 10-Bit Digital Video
- Compatible with NTSC, (RS - 170A &RS -343A), PAL and SECAM
- Diagnostics: Video, DC Power, OLI
- Automatic Resettable Fuses on Power Lines
- Available with Enhanced ″Afinety″Intelligent Monitoring System
- 10 Bit Digital Video Transmission
was $14,769.00 Special Price $14,760.00Low Price Guarantee
Fiber Optic Transmission Frequently Asked Questions
What is fiber optic transmission in surveillance systems?
Fiber optic transmission refers to the use of fiber optic cables to transmit video and data signals over long distances with minimal signal loss. This technology is highly advantageous for surveillance systems, as it provides high bandwidth, resistance to electromagnetic interference, and secure data transmission, making it ideal for high-security environments.
How far can fiber optic transmission extend for surveillance cameras?
The distance for fiber optic transmission can vary significantly depending on the type of fiber used and the equipment specifications. Generally, single-mode fiber can transmit signals up to 40 kilometers or more, while multi-mode fiber typically supports distances of up to 2 kilometers. This makes fiber optic systems suitable for extensive surveillance networks.
What are the benefits of using fiber optics for video surveillance?
Using fiber optics for video surveillance offers several benefits, including higher data transmission rates, longer transmission distances without signal degradation, and immunity to electromagnetic interference. Additionally, fiber optic cables are more secure against tapping, making them a preferred choice for sensitive surveillance applications.
Are there specific types of fiber optic cables for surveillance systems?
Yes, there are two main types of fiber optic cables used in surveillance systems: single-mode and multi-mode. Single-mode fibers are designed for long-distance transmission and have a smaller core, while multi-mode fibers are suitable for shorter distances and have a larger core. The choice depends on the specific requirements of the surveillance setup.
What should I consider when choosing fiber optic equipment for my surveillance system?
When selecting fiber optic equipment, consider factors such as compatibility with existing surveillance cameras, the required transmission distance, environmental conditions, and the type of data being transmitted. Additionally, ensure that the equipment complies with relevant standards and offers features like surge protection and ease of installation.















