Fiber Optic Transmission
Run fiber for ultra-long, interference-free links with our fiber optic transmission lineup. Convert copper to SFP or single-/multimode with fiber converters; carry video, audio, and data across distance with dedicated fiber transmitters and fiber receivers; aggregate channels using fiber multiplexers; and stretch HDMI/IP with fiber extenders. For paired point-to-point kits, see transmitter & receiver sets. Build resilient backbones with low latency and EMI immunity.
Featured Fiber Optic Transmission Manufacturers
- was $649.00 Special Price $418.00SKU: MX-48-LX-SC
American Fibertek MX-48-LX-SC Ethernet LX Fiber Port + 2 RJ45 Ports, MM
- Complete Fiber Optic to Twisted Pair Media Interface
- Auto MDI / MDIX Detection
- Auto Negotiate 10/100 Ports
- Auto Negotiate 10/100 Ports
- Link and Activity Indicators for UTP and Fiber Ports
was $649.00 Special Price $418.00Low Price Guarantee - $651.67SKU: VDT1505WDM
Interlogix VDT1505WDM Digital Video Transmitter / Data Receiver
- Transmission of Video and ′Up-the-Coax′ One-Way Data
- 10-Bit Digitally Encoded Video Transmission
- Exceeds RS-250C Short-Haul Transmission
- Optional Bi-Directional Contact Closure
- NTSC, PAL, SECAM Compatible
$651.67Low Price Guarantee - $297.19SKU: SFP-10G-SR=
Cisco SFP-10G-SR= 10GBASE-SR SFP+ Transceiver Module
- Industry’s smallest 10G form factor for greatest density per chassis
- Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing)
- Supports "pay-as-you-populate" model for investment protection and ease of technology migration
- Digital optical monitoring capability for strong diagnostic capabilities
- Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link
$297.19Low Price Guarantee - $220.80SKU: GLC-LH-SMD=
Cisco GLC-LH-SMD= 1000BASE-LX/LH SFP (Mini-GBIC) Transceiver Module
- GBIC transceiver module
- GigE
- 1000Base-LX
- 1000Base-LH
- LC/PC single-mode
$220.80Low Price Guarantee - $112.00SKU: 87-000019911
Kramer 87-000019911 10Gb Multimode Fiber Duplex SFP+ Module
- Certified SFP+ optical module
- 2–strand LC–connected single–mode fiber
- Ultra–reach — Up to 33km (20.5 miles)
- 2 single–mode LC strands
- Data rate — 10.2Gbps
$112.00Low Price Guarantee - $416.00SKU: 50-00010490
Kramer 50-00010490 HDMI Ultra-Reach Receiver with RS-232 & Loop, Over Any 2-Wire Cable (576)
- High Performance Extender — Reliable HDMI signal extension over distances of up to 600m (2000ft)
- Audio De–embedding — The transmitted digital audio signal is extracted from the AV signal and available in both digital (S/PDIF) and analog format, as well as being available on the HDMI output
- Convenient Connector Options — Connect via one of 3 options: Terminal block (for common 2–wire connection), RJ–45 (CAT) (for typical long–distance applications), or VGA (to enable using HDMI over legacy VGA infrastructure)
- Bidirectional RS–232 Extension — Enabling device control, such as control of the display from the source end, and control of a source from the display end
- True Plug–and–Play — No setup or user configuration is required
$416.00Low Price Guarantee - $416.00SKU: 50-00010390
Kramer 50-00010390 HDMI Ultra-Reach Transmitter with RS-232 & Loop, Over Any 2-Wire Cable (575)
- High Performance Extender — Reliable HDMI signal extension over distances of up to 600m (2000ft)
- Convenient Connector Options — Connect via one of 3 options: Terminal block (for common 2–wire connection), RJ–45 (CAT) (for typical long–distance applications), or VGA (to enable using HDMI over legacy VGA infrastructure)
- Cascaded Signal Distribution — The TP–752T transmitter has an active, reclocking HDMI output loop port for cascaded signal extenders or distributors, or local signal monitoring
- Bidirectional RS–232 Extension — Enabling device control, such as control of the display from the source end, and control of a source from the display end
- True Plug–and–Play — No setup or user configuration is required
$416.00Low Price Guarantee - $1,147.20SKU: 50-00003190
Kramer 50-00003190 4K60 4:2:0 Dual−link DVI Rx/Tx Extender Over Ultra−Reach Multimode Fiber
- Max. Data Rate - 13.5Gbps (2.25Gbps per graphic channel)
- Max. Resolution - HDTV: 480p, 720p, 1080p; Vesa: VGA to WQUXGA @33Hz (XGA not supported)
- 4K Compatible
- Not HDCP Compliant
- Standards Compliance - Supports DVI1.0, fully implemented by fiber−optic communication and DDC2B by virtual DDC; Class A digital device, pursuant to part 15 and 2 of FCC and CE
$1,147.20Low Price Guarantee - $1,032.00SKU: 94-0006150
Kramer 94-0006150 4K HDR HDMI Transmitter/Receiver Over Extended–Reach Multi–Mode Fiber Optic
- Max. Resolution — 4K@60(4:4:4)
- Max. Data Rate — 18Gbps
- HDMI Support — HDCP 2.2, EDID and CEC. 18Gbps, 3D content transmission, and HDR10 as specified in HDMI 2.0
- High Quality Connectors — 24K gold–plated and corrosion–resistant for the best possible connectivity
- K–Lock Pull–Resistant Connectors — Provides 15lbs of restraining force for a non–slip connection
$1,032.00Low Price Guarantee
Fiber Optic Transmission Frequently Asked Questions
What is fiber optic transmission in surveillance systems?
Fiber optic transmission refers to the use of fiber optic cables to transmit video and data signals over long distances with minimal signal loss. This technology is highly advantageous for surveillance systems, as it provides high bandwidth, resistance to electromagnetic interference, and secure data transmission, making it ideal for high-security environments.
How far can fiber optic transmission extend for surveillance cameras?
The distance for fiber optic transmission can vary significantly depending on the type of fiber used and the equipment specifications. Generally, single-mode fiber can transmit signals up to 40 kilometers or more, while multi-mode fiber typically supports distances of up to 2 kilometers. This makes fiber optic systems suitable for extensive surveillance networks.
What are the benefits of using fiber optics for video surveillance?
Using fiber optics for video surveillance offers several benefits, including higher data transmission rates, longer transmission distances without signal degradation, and immunity to electromagnetic interference. Additionally, fiber optic cables are more secure against tapping, making them a preferred choice for sensitive surveillance applications.
Are there specific types of fiber optic cables for surveillance systems?
Yes, there are two main types of fiber optic cables used in surveillance systems: single-mode and multi-mode. Single-mode fibers are designed for long-distance transmission and have a smaller core, while multi-mode fibers are suitable for shorter distances and have a larger core. The choice depends on the specific requirements of the surveillance setup.
What should I consider when choosing fiber optic equipment for my surveillance system?
When selecting fiber optic equipment, consider factors such as compatibility with existing surveillance cameras, the required transmission distance, environmental conditions, and the type of data being transmitted. Additionally, ensure that the equipment complies with relevant standards and offers features like surge protection and ease of installation.
Filter
Shopping Options
