Fiber Optic Transmission
Run fiber for ultra-long, interference-free links with our fiber optic transmission lineup. Convert copper to SFP or single-/multimode with fiber converters; carry video, audio, and data across distance with dedicated fiber transmitters and fiber receivers; aggregate channels using fiber multiplexers; and stretch HDMI/IP with fiber extenders. For paired point-to-point kits, see transmitter & receiver sets. Build resilient backbones with low latency and EMI immunity.
Featured Fiber Optic Transmission Manufacturers
- $51.00SKU: P1B2K
Altronix P1B2K Small Form-Factor Pluggable Single-Mode Transceiver Works with P1A2K
- Spans distances up to 2km (6561 ft.)
- Conforms to (SFP) Small Form-Factor Pluggable Multi-Source Agreement (MSA)
$51.00Low Price Guarantee - $2,025.08SKU: LTC-4628-60
Bosch LTC-4628-60 Video/Data Transceiver 120-230VAC 60HZ
- No adjustments required
- Long distance - high security
- Surface-mount or rack-mount units
- Video models support NTSC, PAL, and SECAM Standards
$2,025.08Low Price Guarantee - $4,885.59SKU: CNFE2005M2PoE/HO/M
Comnet CNFE2005M2PoE/HO/M 2 Channel 10/100 Mbps Ethernet 1310nm, 60 W PoE++
- Optional 30W or 60W PoE+ on ports 1 and 2
- 10/100 Mbps Ethernet
- Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
$4,885.59Low Price Guarantee - $1,394.00SKU: CNMC2SFP
Comnet CNMC2SFP ComFit Dual 10/100/1000Mbps Ethernet Media Converter
- Full-duplex transmission of 10/100/1000 Mbps Ethernet
- IEEE 802.3 compliant
- 10/100/1000 BASE-TX port supports auto-negotiation and automatic MDI/MDI-X crossover for full and half-duplex operation
- Uses customer-installed ComNet SFPs for compatibility with a wide range of optical fibers, optical connector types, and optical transmission distances of up to 120 km
- Designed for installation in harsh out-of-plant/unconditioned industrial or roadside operating environments (-40º to +75ºC ambient). Fully compliant with the environmental requirements of NEMA TS-2 for Traffic Signal Control Equipment
$1,394.00Low Price Guarantee - $1,173.50SKU: CNFE2005S2PoE/M
Comnet CNFE2005S2PoE/M 2 Channel 10/100 Mbps Ethernet 1310nm, 30 W PoE+
- Optional 30W or 60W PoE+ on ports 1 and 2
- 10/100 Mbps Ethernet
- Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
$1,173.50Low Price Guarantee - $1,027.00SKU: CNFE1002BPOESHO/M
Comnet CNFE1002BPOESHO/M 10/100 Mbps Ethernet 2 Port Media Converter with PoE+
- Exceeds the requirements of the latest PoE+ standard (IEEE 802.3at)
- The Ethernet electrical interface auto-negotiates to either 10 or 100 Mbps without the need for any user selection
- The optical interface operates at 100 Mbps (100-FX)
- 60 watt higher output
- ST optical connector
$1,027.00Low Price Guarantee - $1,002.87SKU: CNFE2004S1B
Comnet CNFE2004S1B 2 Channel 10/100 Mbps Ethernet 1550/1310nm
- 10/100 Mbps Ethernet
- Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
- Distances up to: 3 km (2 mi) Multimode, 20 km (12 mi) Single Mode
$1,002.87Low Price Guarantee - $1,002.87SKU: CNFE2004S1B/M
Comnet CNFE2004S1B/M 2 Channel 10/100 Mbps Ethernet 1550/1310nm
- 10/100 Mbps Ethernet
- Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
- Distances up to: 3 km (2 mi) Multimode, 20 km (12 mi) Single Mode
$1,002.87Low Price Guarantee - $962.05SKU: CNFE2002M1B/M
Comnet CNFE2002M1B/M Mini AC/DC Power 10/100 Mbps Media Converter, Non-PoE
- 10/100 Mbps Ethernet
- 2 × 10/100 BASE-T/TX electrical ports
- 100 BASE-FX optical port
- Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
- Optical port supports 100 Mbps full duplex data
$962.05Low Price Guarantee - $636.13SKU: S730DVR-RST2
GE Security Interlogix S730DVR-RST2 MM - Video & 2-Way MPD Data
- One-way video and two-way multiprotocol data transmission over two fibers
- Multimode model
- 10-bit video processing
- 560 TV lines video resolution
- Unique data translation function
$636.13Low Price Guarantee - $2,100.00SKU: MR-980C
American Fibertek MR-980C 8 Channel 10-Bit Digital Video, Multimode
- Compatible with NTSC, (RS - 170A & RS -343A), PAL and SECAM
- Diagnostics: Video, DC Power, Digital Frame Sync, OLI
- Available with Enhanced ″Afinety″ Intelligent Monitoring System
- 10 Bit Digital Video Transmission
- Serial Digital Transmission
$2,100.00Low Price Guarantee - $1,676.00SKU: MT-91P588C
American Fibertek MT-91P588C Digital Video/ MPD & 2 Channel Audio, 12dB, 4KM
- Compatible with NTSC; RS-170A & RS-343A, PAL, and SECAM
- 10 Bit Digital Video Transmission
- Diagnostics: Video, DC Power, Audio, Data and Contact Closure Activity, Digital Frame Sync, and Optical Presence
- Serial Digital Transmission
$1,676.00Low Price Guarantee - $1,141.00SKU: MR-88SL
American Fibertek MR-88SL Eight Channel Supervised Contact System 1310nm 21dB Single Mode
- 8 Channels, Form-C (Normally Open or Normally Closed) Dry Contact Closure
- Diagnostics: Power, Optical Presence and Channel Indicators
- High Density DB26 Data Connector with Adaptor to screw terminal
- External Contact Input Supervision
$1,141.00Low Price Guarantee - $882.00SKU: MX-480SL-ST
American Fibertek MX-480SL-ST Single Channel Multi-Protocol Configurable Data Module
- Multi-protocol Data - switch selectable as RS-485 (2 or 4 wire), RS-422, RS-232 or Manchester Code
- DC to 115 Kb/s
- Activity Indicators for Data Tx and Rx for each Channel
$882.00Low Price Guarantee - $659.92SKU: MX-480-ST
American Fibertek MX-480-ST Multiprotocol Configurable Data Module Rx Multi-mode 2 Fiber
- Multi-protocol Data - switch selectable as RS-485 (2 or 4 wire), RS-422, RS-232 or Manchester Code
- DC to 115 Kb/s
- Activity Indicators for Data Tx and Rx for each Channel
$659.92Low Price Guarantee - $483.00SKU: RX-50-FX-ST
American Fibertek RX-50-FX-ST 2 Fiber 10/100 D/R Ethernet, MM
- Complete Fiber Optic to Twisted Pair Media Interface
- Auto Negotiate 10/100 Ports
- Auto MDI/MDIX Detection
- Link and Activity Indicators for UTP and Fiber Ports
- Multimode Fiber
$483.00Low Price Guarantee - $448.88SKU: VT4010M
GE Security Interlogix VT4010M FM Mini Video Transmitter, MM, 1 Fiber
- NTSC, PAL, SECAM Compatible
- Full Color Compatibility
- No In-field Electrical or Optical Adjustments Required
- Power Status Indicating LED to Monitor System Performance
- Automatic Resettable Fuses on all Power Lines
$448.88Low Price Guarantee - $386.00SKU: RX-46-FX-SL-ST
American Fibertek RX-46-FX-SL-ST 2 Fiber 10/100 Ethernet SM
- Complete Fiber Optic to Twisted Pair Media Interface
- Auto MDI / MDIX Detection
- Auto Negotiate 10/100 Ports
- Link and Activity Indicators for UTP and Fiber Ports
- Singlemode and Multimode Fiber Versions Available
$386.00Low Price Guarantee - $318.00SKU: SFP-LH
Comnet SFP-LH 1000fx, 1310nm, 20km, LC, 2 Fiber, MSA Compliant
- Interchangeable SFP for fiber type, distance and connector
- IEEE 802.3 compliant
- Conforms to (SFP) Small Form-Factor Pluggable Multi-Source Agreement (MSA)
- Operating temperature: -40° C to +75° C
- Storage temperature: -40° C to +85° C
$318.00Low Price Guarantee - $289.95SKU: FSFP-BGSM1SC20
Pelco FSFP-BGSM1SC20 1 Channel Single Mode Fiber Receiver, SC
- Interchangeable Receivers to Match Media Type, Fiber Count, Fiber Path Length, and Connector Type
- Operating Temperature of - 40° to 75° C ( - 40° to 167° F)
- No Performance Adjustments Required
- Multi-Source Agreement (MSA) Compliant
- Compliant with IEEE 802.3 Standards
$289.95Low Price Guarantee
Fiber Optic Transmission Frequently Asked Questions
What is fiber optic transmission in surveillance systems?
Fiber optic transmission refers to the use of fiber optic cables to transmit video and data signals over long distances with minimal signal loss. This technology is highly advantageous for surveillance systems, as it provides high bandwidth, resistance to electromagnetic interference, and secure data transmission, making it ideal for high-security environments.
How far can fiber optic transmission extend for surveillance cameras?
The distance for fiber optic transmission can vary significantly depending on the type of fiber used and the equipment specifications. Generally, single-mode fiber can transmit signals up to 40 kilometers or more, while multi-mode fiber typically supports distances of up to 2 kilometers. This makes fiber optic systems suitable for extensive surveillance networks.
What are the benefits of using fiber optics for video surveillance?
Using fiber optics for video surveillance offers several benefits, including higher data transmission rates, longer transmission distances without signal degradation, and immunity to electromagnetic interference. Additionally, fiber optic cables are more secure against tapping, making them a preferred choice for sensitive surveillance applications.
Are there specific types of fiber optic cables for surveillance systems?
Yes, there are two main types of fiber optic cables used in surveillance systems: single-mode and multi-mode. Single-mode fibers are designed for long-distance transmission and have a smaller core, while multi-mode fibers are suitable for shorter distances and have a larger core. The choice depends on the specific requirements of the surveillance setup.
What should I consider when choosing fiber optic equipment for my surveillance system?
When selecting fiber optic equipment, consider factors such as compatibility with existing surveillance cameras, the required transmission distance, environmental conditions, and the type of data being transmitted. Additionally, ensure that the equipment complies with relevant standards and offers features like surge protection and ease of installation.
Filter
Shopping Options
