Fiber Optic Transmission
Run fiber for ultra-long, interference-free links with our fiber optic transmission lineup. Convert copper to SFP or single-/multimode with fiber converters; carry video, audio, and data across distance with dedicated fiber transmitters and fiber receivers; aggregate channels using fiber multiplexers; and stretch HDMI/IP with fiber extenders. For paired point-to-point kits, see transmitter & receiver sets. Build resilient backbones with low latency and EMI immunity.
Featured Fiber Optic Transmission Manufacturers
- $1,988.00SKU: FRV10D1S1FC
Pelco FRV10D1S1FC 1 Channel Video Bi-Direct RX FC Connector, Single Mode
- 10-Bit Digitally Encoded Video for High-Quality Video Transmission over a Single Fiber
- Bidirectional Data Channel that Supports RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, Bi-Phase, and Coaxitron Communication
- Supports Pelco Coaxitron ″Up-the-Coax″ Control Signals for a Distance up to 48 km (30 mi)
- Single-Mode Fiber Support for Distances up to 69 km (43 mi)
- Exceeds All Requirements for RS-250C Short-Haul Transmission
$1,988.00Low Price Guarantee - $1,982.57SKU: FTV10D1A2S1FC
Pelco FTV10D1A2S1FC 1 Channel Video Fiber Transmitter FC Connector, Single Mode
- 1 Bidirectional Contact Closure
- Single-Mode Support for Distances up to 48 km (29.8 mi)
- Exceeds All Requirements for the EIA RS-250C Short-Haul Transmission Specification
- Laser Diode for Transmission of Optical Signals
- Compatible NTSC, PAL, and SECAM Video Standards
$1,982.57Low Price Guarantee - $1,982.57SKU: FTV40S1FC
Pelco FTV40S1FC 4 Channel Video Fiber Transmitter FC Connector, Single Mode
- 10-Bit Digitally Encoded Video for High-Quality Multichannel Video Transmission over a Single Fiber
- Single-Mode Fiber Support for Distances up to 69 km (42.9 mi)
- Exceeds All Requirements for EIA RS-250C Short-Haul Transmission Specifications
- Laser Diode for Transmission of Optical Signals
- Compatible with NTSC, PAL, or SECAM Video Standards
$1,982.57Low Price Guarantee - $1,980.00SKU: VDT1535WDM
Interlogix VDT1535WDM Digital Video Transmitter / Data Receiver
- Transmission of Video and ″Up-the-Coax″ One-Way Data
- 10-Bit Digitally Encoded Video Transmission
- Exceeds RS-250CC Short-Haul Transmission
- Optional Bi-Directional Contact Closure
- NTSC, PAL, SECAM Compatible
$1,980.00Low Price Guarantee - $1,976.00SKU: 616R-T-SET-US
Kramer 616R-T-SET-US 2-Fiber Detachable Dual Link DVI Module (Rx & Tx Set)
- Max. Data Rate - 13.5Gbps (2.25Gbps per graphic channel)
- Max. Resolution - HDTV: 480p, 720p, 1080p; Vesa: VGA to WQUXGA @33Hz (XGA not supported)
- Not HDCP Compliant
- Standards Compliance - Supports DVI1.0, fully implemented by fiber-optic communication and DDC2B by virtual DDC; Class A digital device, pursuant to part 15 and 2 of FCC and CE
- Laser Standards Compliance - IEC 60825-1, FDA 21CFR1040; Laser Class 1: Safety of laser products
$1,976.00Low Price Guarantee - $1,950.00SKU: MR-940C-SL
American Fibertek MR-940C-SL 10-Bit 4 Channel Video Receiver, Singlemode
- Compatible with NTSC, (RS - 170A & RS -343A), PAL and SECAM
- Diagnostics: Video, DC Power, Digital Frame Sync, OLI
- Available with Enhanced ″Afinety″Intelligent Monitoring System
- 10 Bit Digital Video Transmission
- Serial Digital Transmission
$1,950.00Low Price Guarantee - $1,950.00SKU: MR-92P55C
American Fibertek MR-92P55C Two 10 Bit Video / 2 MPD Data Module Receiver, Multi-Mode 1 Fiber
- Two 10 Bit Video / 2 MPD Data Module Rx
- 1310/1550nm 12dB 4Km
- Multi-Mode 1 Fiber
$1,950.00Low Price Guarantee - $1,940.21SKU: FVR41S1
Comnet FVR41S1 4-Channel Digitally Encoded Video Receiver, sm, 1 Fiber
- Digitally encoded video transmission, transmits 4 real-time color video signals on one optical fiber
- Exceptionally low video distortion with zero Performance Variation vs. Optical Path Loss
- Compatible with all NTSC, PAL, or SECAM CCTV camera systems
- Wide optical dynamic range: optical attenuators are never required
- NTCIP compatible
$1,940.21Low Price Guarantee - $1,934.00SKU: FRV40M1ST
Pelco FRV40M1ST 4-Channel Video Fiber Receiver with ST Connector, Multi-Mode
- 10-Bit Digitally Encoded Video for High-Quality Multichannel Video Transmission over a Single Fiber
- Multimode Fiber Support for Distances up to 2 km (1.2 mi)
- Exceeds All Requirements for EIA RS-250C Short-Haul Transmission Specifications
- Laser Diode for Transmission of Optical Signals
- Compatible with NTSC, PAL, or SECAM Video Standards
$1,934.00Low Price Guarantee
Fiber Optic Transmission Frequently Asked Questions
What is fiber optic transmission in surveillance systems?
Fiber optic transmission refers to the use of fiber optic cables to transmit video and data signals over long distances with minimal signal loss. This technology is highly advantageous for surveillance systems, as it provides high bandwidth, resistance to electromagnetic interference, and secure data transmission, making it ideal for high-security environments.
How far can fiber optic transmission extend for surveillance cameras?
The distance for fiber optic transmission can vary significantly depending on the type of fiber used and the equipment specifications. Generally, single-mode fiber can transmit signals up to 40 kilometers or more, while multi-mode fiber typically supports distances of up to 2 kilometers. This makes fiber optic systems suitable for extensive surveillance networks.
What are the benefits of using fiber optics for video surveillance?
Using fiber optics for video surveillance offers several benefits, including higher data transmission rates, longer transmission distances without signal degradation, and immunity to electromagnetic interference. Additionally, fiber optic cables are more secure against tapping, making them a preferred choice for sensitive surveillance applications.
Are there specific types of fiber optic cables for surveillance systems?
Yes, there are two main types of fiber optic cables used in surveillance systems: single-mode and multi-mode. Single-mode fibers are designed for long-distance transmission and have a smaller core, while multi-mode fibers are suitable for shorter distances and have a larger core. The choice depends on the specific requirements of the surveillance setup.
What should I consider when choosing fiber optic equipment for my surveillance system?
When selecting fiber optic equipment, consider factors such as compatibility with existing surveillance cameras, the required transmission distance, environmental conditions, and the type of data being transmitted. Additionally, ensure that the equipment complies with relevant standards and offers features like surge protection and ease of installation.
Filter
Shopping Options
