Fiber Optic Transmission
Run fiber for ultra-long, interference-free links with our fiber optic transmission lineup. Convert copper to SFP or single-/multimode with fiber converters; carry video, audio, and data across distance with dedicated fiber transmitters and fiber receivers; aggregate channels using fiber multiplexers; and stretch HDMI/IP with fiber extenders. For paired point-to-point kits, see transmitter & receiver sets. Build resilient backbones with low latency and EMI immunity.
Featured Fiber Optic Transmission Manufacturers
- was $789.68 Special Price $580.00SKU: CWFE1002APOES/M
Comnet CWFE1002APOES/M 10/100 Mbps Ethernet 2 Port Media Converter
- Exceeds the requirements of the latest PoE+ standard (IEEE 802.3at)
- Power Sourcing Equipment (PSE): Provides 30 watts in two modes at 48 VDC, for high output demand applications of remote Ethernet equipment
- ST optical connector
- Automatic resettable solid state current limiters for unconditional modem protection
- Bi-color (Red/Green) status indicating LEDs provide rapid indication of critical operating parameters
was $789.68 Special Price $580.00Low Price Guarantee - was $1,550.00 Special Price $1,143.00SKU: MR-9P589
American Fibertek MR-9P589 Multi-protocol Bi-directional Data & Audio & Contact Module Rx 12dB MM
- 24Bit Digital Audio
- Diagnostics: Audio, Data, Contact, Power & Optical Presence
- Automatic Resettable Fuses on Power Lines
was $1,550.00 Special Price $1,143.00Low Price Guarantee - was $522.51 Special Price $386.00SKU: RX-46-FX-SC
American Fibertek RX-46-FX-SC Two Fiber Rack Card FX Mult-Mode
- Complete Fiber Optic to Twisted Pair Media Interface
- Auto MDI / MDIX Detection
- Auto Negotiate 10/100 Ports
- Link and Activity Indicators for UTP and Fiber Ports
- Multimode Fiber Version
was $522.51 Special Price $386.00Low Price Guarantee - was $684.62 Special Price $506.00SKU: CWFE1002APOEM/M
Comnet CWFE1002APOEM/M 10/100 Mbps Ethernet 2 Port Media Converter
- Exceeds the requirements of the latest PoE+ standard (IEEE 802.3at)
- Power Sourcing Equipment (PSE): Provides 30 watts in two modes at 48 VDC, for high output demand applications of remote Ethernet equipment
- ST optical connector
- Automatic resettable solid state current limiters for unconditional modem protection
- Bi-color (Red/Green) status indicating LEDs provide rapid indication of critical operating parameters
was $684.62 Special Price $506.00Low Price Guarantee - was $2,191.00 Special Price $1,621.00SKU: FVR41M1
Comnet FVR41M1 4-Channel Digitally Encoded Video Receiver, mm, 1 Fiber
- Digitally encoded video transmission, transmits 4 real-time color video signals on one optical fiber
- Exceptionally low video distortion with zero Performance Variation vs. Optical Path Loss
- Compatible with all NTSC, PAL, or SECAM CCTV camera systems
- Wide optical dynamic range: optical attenuators are never required
- NTCIP compatible
was $2,191.00 Special Price $1,621.00Low Price Guarantee - was $1,190.00 Special Price $882.00SKU: RRX-489-SL
American Fibertek RRX-489-SL One Fiber Rack Card Singlemode SC Connectors 1550nm
- Normally Open Contact
- LED Indicators for Contact Tx,Contact Rx and Optical Level
- Low Profile Module
- Multimode Version Available
was $1,190.00 Special Price $882.00Low Price Guarantee - was $1,412.56 Special Price $1,053.00SKU: NETWAYSP4BTWPN
Altronix NETWAYSP4BTWPN 4-Port Outdoor Hardened 802.3bt 4PPoE Switch, Outdoor Enclosure
- IEEE 802.3af, 802.3at, 802.3bt compliant
- Two (2) Gigabit SFP ports
- Four (4) 10/100/1000 Mbps Ethernet ports rated at 90W each (limited to 280W total power)
- VLAN (Virtual Local Area Networks) subnetwork allows for the grouping together of devices for improved network traffic and higher security
- Remote network management allows for camera/device reset and diagnostic monitoring
was $1,412.56 Special Price $1,053.00Low Price Guarantee - was $3,200.00 Special Price $2,400.00SKU: RT-98P9C-SL
American Fibertek RT-98P9C-SL Eight 10 Bit Video & Contact - Rack Card Transmitter 1310/1550nm - 15dB SM - 1 Fiber
- Eight 10 Bit Video & Contact - Rack Card Tx
- 1310/1550nm - 15dB
- SM - 1 Fiber
was $3,200.00 Special Price $2,400.00Low Price Guarantee - was $2,800.00 Special Price $2,100.00SKU: RT-94P99C
American Fibertek RT-94P99C Four 10 Bit Video and Two Contacts Rack Card Transmitter 12dB Multi-Mode 1 Fiber
- Four 10 Bit Video and Two Contacts - Rack Card Transmitter
- 12dB Multi-Mode 1 Fiber
was $2,800.00 Special Price $2,100.00Low Price Guarantee
Fiber Optic Transmission Frequently Asked Questions
What is fiber optic transmission in surveillance systems?
Fiber optic transmission refers to the use of fiber optic cables to transmit video and data signals over long distances with minimal signal loss. This technology is highly advantageous for surveillance systems, as it provides high bandwidth, resistance to electromagnetic interference, and secure data transmission, making it ideal for high-security environments.
How far can fiber optic transmission extend for surveillance cameras?
The distance for fiber optic transmission can vary significantly depending on the type of fiber used and the equipment specifications. Generally, single-mode fiber can transmit signals up to 40 kilometers or more, while multi-mode fiber typically supports distances of up to 2 kilometers. This makes fiber optic systems suitable for extensive surveillance networks.
What are the benefits of using fiber optics for video surveillance?
Using fiber optics for video surveillance offers several benefits, including higher data transmission rates, longer transmission distances without signal degradation, and immunity to electromagnetic interference. Additionally, fiber optic cables are more secure against tapping, making them a preferred choice for sensitive surveillance applications.
Are there specific types of fiber optic cables for surveillance systems?
Yes, there are two main types of fiber optic cables used in surveillance systems: single-mode and multi-mode. Single-mode fibers are designed for long-distance transmission and have a smaller core, while multi-mode fibers are suitable for shorter distances and have a larger core. The choice depends on the specific requirements of the surveillance setup.
What should I consider when choosing fiber optic equipment for my surveillance system?
When selecting fiber optic equipment, consider factors such as compatibility with existing surveillance cameras, the required transmission distance, environmental conditions, and the type of data being transmitted. Additionally, ensure that the equipment complies with relevant standards and offers features like surge protection and ease of installation.
Filter
Shopping Options
