Fiber Receiver
- $2,010.45SKU: FTV80M1ST
Pelco FTV80M1ST 8 Channel Video Fiber Transmitter with ST Connector, Multi-Mode
- Multimode Fiber Support for Distances up to 3 km (1.9 mi)
- Exceeds All Requirements for EIA RS-250C Short-Haul Transmission Specifications
- Compatible with NTSC, PAL, or SECAM Video Standards
- Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
- Laser Diode for Transmission of Optical Signals
$2,010.45Low Price Guarantee - $1,988.00SKU: FRV10D1S1FC
Pelco FRV10D1S1FC 1 Channel Video Bi-Direct RX FC Connector, Single Mode
- 10-Bit Digitally Encoded Video for High-Quality Video Transmission over a Single Fiber
- Bidirectional Data Channel that Supports RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, Bi-Phase, and Coaxitron Communication
- Supports Pelco Coaxitron ″Up-the-Coax″ Control Signals for a Distance up to 48 km (30 mi)
- Single-Mode Fiber Support for Distances up to 69 km (43 mi)
- Exceeds All Requirements for RS-250C Short-Haul Transmission
$1,988.00Low Price Guarantee - $1,982.57SKU: FTV10D1A2S1FC
Pelco FTV10D1A2S1FC 1 Channel Video Fiber Transmitter FC Connector, Single Mode
- 1 Bidirectional Contact Closure
- Single-Mode Support for Distances up to 48 km (29.8 mi)
- Exceeds All Requirements for the EIA RS-250C Short-Haul Transmission Specification
- Laser Diode for Transmission of Optical Signals
- Compatible NTSC, PAL, and SECAM Video Standards
$1,982.57Low Price Guarantee - $1,982.57SKU: FTV40S1FC
Pelco FTV40S1FC 4 Channel Video Fiber Transmitter FC Connector, Single Mode
- 10-Bit Digitally Encoded Video for High-Quality Multichannel Video Transmission over a Single Fiber
- Single-Mode Fiber Support for Distances up to 69 km (42.9 mi)
- Exceeds All Requirements for EIA RS-250C Short-Haul Transmission Specifications
- Laser Diode for Transmission of Optical Signals
- Compatible with NTSC, PAL, or SECAM Video Standards
$1,982.57Low Price Guarantee - $1,980.00SKU: VDT1535WDM
Interlogix VDT1535WDM Digital Video Transmitter / Data Receiver
- Transmission of Video and ″Up-the-Coax″ One-Way Data
- 10-Bit Digitally Encoded Video Transmission
- Exceeds RS-250CC Short-Haul Transmission
- Optional Bi-Directional Contact Closure
- NTSC, PAL, SECAM Compatible
$1,980.00Low Price Guarantee - $1,976.00SKU: 616R-T-SET-US
Kramer 616R-T-SET-US 2-Fiber Detachable Dual Link DVI Module (Rx & Tx Set)
- Max. Data Rate - 13.5Gbps (2.25Gbps per graphic channel)
- Max. Resolution - HDTV: 480p, 720p, 1080p; Vesa: VGA to WQUXGA @33Hz (XGA not supported)
- Not HDCP Compliant
- Standards Compliance - Supports DVI1.0, fully implemented by fiber-optic communication and DDC2B by virtual DDC; Class A digital device, pursuant to part 15 and 2 of FCC and CE
- Laser Standards Compliance - IEC 60825-1, FDA 21CFR1040; Laser Class 1: Safety of laser products
$1,976.00Low Price Guarantee - $1,950.00SKU: MR-940C-SL
American Fibertek MR-940C-SL 10-Bit 4 Channel Video Receiver, Singlemode
- Compatible with NTSC, (RS - 170A & RS -343A), PAL and SECAM
- Diagnostics: Video, DC Power, Digital Frame Sync, OLI
- Available with Enhanced ″Afinety″Intelligent Monitoring System
- 10 Bit Digital Video Transmission
- Serial Digital Transmission
$1,950.00Low Price Guarantee - $1,950.00SKU: MR-92P55C
American Fibertek MR-92P55C Two 10 Bit Video / 2 MPD Data Module Receiver, Multi-Mode 1 Fiber
- Two 10 Bit Video / 2 MPD Data Module Rx
- 1310/1550nm 12dB 4Km
- Multi-Mode 1 Fiber
$1,950.00Low Price Guarantee - $1,940.21SKU: FVR41S1
Comnet FVR41S1 4-Channel Digitally Encoded Video Receiver, sm, 1 Fiber
- Digitally encoded video transmission, transmits 4 real-time color video signals on one optical fiber
- Exceptionally low video distortion with zero Performance Variation vs. Optical Path Loss
- Compatible with all NTSC, PAL, or SECAM CCTV camera systems
- Wide optical dynamic range: optical attenuators are never required
- NTCIP compatible
$1,940.21Low Price Guarantee
Filter
Shopping Options
