Controllers & Modules
- $77.75SKU: B820
Radionix by Bosch B820 SDI2 Inovonics Interface Module
- Provides connectivity to Inovonics EchoStream EN4200 Serial Receiver
- May be installed up to 1000 ft from the control panel, allowing for optimal wireless reception
- Mounts directly inside the EN4200 Receiver housing, no separate enclosure required
- UL and CSFM Listed
$77.75Low Price Guarantee - $350.00SKU: AIM-AEC21-CVT
Bosch AEC2.1 Reader and Input-Output Extension Module, AIM-AEC21-CVT
- 4 readers expandable to 32 readers
- Supports up to 20,480 card holders and 100,000 transactions
- Classify cardholders based on 254 access groups
- 255 time schedules, 32 regular and 32 special holidays
- Anti-passback (APB) capabilities
$350.00Low Price Guarantee - $265.00SKU: AEC-AEC21-EXT1
Bosch AEC2.1 Extension Enclosure, PSU1, AEC-AEC21-EXT1
- 4 readers expandable to 32 readers
- Supports up to 20,480 card holders and 100,000 transactions
- Classify cardholders based on 254 access groups
- 255 time schedules, 32 regular and 32 special holidays
- Anti-passback (APB) capabilities
$265.00Low Price Guarantee - $112.86SKU: DSM-12-24-R
Bosch Dual Synchronization Module, Red, DSM-12-24-R
- Module that synchronizes notification appliances on a single Class A or two Class B circuits
- It can be flush mounted or surface mounted
$112.86Low Price Guarantee - $369.17SKU: AL800LGK9E
Bosch AL800LGK9E Logic Board, al800lgk9e
- Class 2 rated power-limited outputs
- Two (2) Class A or two (2) Class B FACP inputs
- Two (2) NC dry contact trigger inputs
- Two (2) Class A or four (4) Class B notification circuits of which two (2) Class B outputs may be paralleled for more power on a notification circuit
- One (1) auxiliary power output at 1 A supply current with battery back up
$369.17Low Price Guarantee - $127.50SKU: DX3010
Bosch Octo-output Expander, DX3010
- Up to eight fully programmable and individual operating outputs
- Remotely mount in a D203 enclosure
$127.50Low Price Guarantee - $81.00SKU: DX2011
Bosch DX2011, DX2010 Input Expander with a D203 Metal Enclosure, DX2011
- Up to eight sensor input loops
- Directly connects to the control panel data bus
$81.00Low Price Guarantee - $66.00SKU: DX2010
Bosch Input Expander, DX2010
- Up to eight sensor input loops
- Directly connects to the control panel data bus
$66.00Low Price Guarantee - $228.30$228.30Low Price Guarantee
- $151.00SKU: D7048
Bosch Octal Driver Modules, D7048
- Compatible with the D7024, FPD-7024, or FPA-1000 FACPs
- D7048 mounts inside the FACP enclosure; no separate enclosure needed
- Each driver output is fully programmable
- Up to two modules are supported by the FACP
$151.00Low Price Guarantee - $34.27SKU: D9127T
Bosch POPIT Module, D9127T
- Provides point identification of initiating devices
- Supervises wiring to devices for circuit integrity
- Expands the number of points in the system
- Compact size
- Terminal connections for reliability
$34.27Low Price Guarantee - $139.00SKU: D7042B
Bosch Eight-input Remote Module with Fire Enclosure, D7042B
- Has eight Class B (Style B) initiating circuits
- Includes eight UL Listed EOL resistors
- Red metal fire enclosure (D7042B) for remote mounting
- Easy to install
- Connects to multiplex bus
$139.00Low Price Guarantee - $132.04SKU: D7042
Bosch Eight-input Remote Modules, D7042
- Has eight Class B (Style B) initiating circuits
- Includes eight UL Listed EOL resistors
- Convenient plastic case
- Easy to install
- Connects to multiplex bus
$132.04Low Price Guarantee - $475.81SKU: API-AMC2-8IOE
Bosch Access Modular Controller, API-AMC2-8IOE
- RS485 connection to the AMC2 controller
- Three models available one with 8 inputs & 8 outputs, one with 16 inputs & 16 outputs, and one with 16 inputs
- Status of inputs and outputs shows on AMC2 LCD display
- Transfer rate to EXT interface (RS485): 9,6 kBit/sec
- The AMC2 Extensionboards can be supplied with the PBC-60 power supply unit with integrated UPS
$475.81Low Price Guarantee - $795.49SKU: API-AMC2-4WE
Radionix by Bosch API-AMC2-4WE Wiegand Extension Board
- RS485 connection to the AMC2 4W controller
- 4 Wiegand reader interfaces
- 8 analog inputs
- 8 relais outputs (wet or dry)
- Status of inputs and outputs shows on AMC2 4W LCD display
$795.49Low Price Guarantee - $794.72SKU: API-AMC2-16ION
Bosch Standalone Controller with Inputs and Outputs, API-AMC2-16ION
- Intelligent access manager for one to eight entrances
- Four interfaces include the reader power supply
- Standard 2 GB compact flash
- LCD display for displaying information
- Self-controlling send and receive switching
$794.72Low Price Guarantee - $567.85SKU: API-AMC2-16IOE
Radionix by Bosch 16 Input/Output Extension Board, API-AMC2-16IOE
- RS485 connection to the AMC2 controller
- Three models available one with 8 inputs & 8 outputs, one with 16 inputs & 16 outputs, and one with 16 inputs
- Status of inputs and outputs shows on AMC2 LCD display
- Transfer rate to EXT interface (RS485): 9,6 kBit/sec
- The AMC2 Extensionboards can be supplied with the PBC-60 power supply unit with integrated UPS
$567.85Low Price Guarantee - $457.51SKU: API-AMC2-16IE
Bosch 16 Input Extension Board, API-AMC2-16IE
- RS485 connection to the AMC2 controller
- Three models available one with 8 inputs & 8 outputs, one with 16 inputs & 16 outputs, and one with 16 inputs
- Status of inputs and outputs shows on AMC2 LCD display
- Transfer rate to EXT interface (RS485): 9,6 kBit/sec
- The AMC2 Extensionboards can be supplied with the PBC-60 power supply unit with integrated UPS
$457.51Low Price Guarantee - $184.69SKU: FLM-325-NAI4
Bosch Supervised Output Module (Class A and B, with isolator), FLM-325-NAI4
- Contacts are rated 2 A at 24 VDC
- Flexible application and quick response to emergency conditions
- Can be alarmed or reset by zone or by individual address
- Module address programming with the D5070 Analog Device Programmer
- Bi-colored LED provides module status
$184.69Low Price Guarantee - $96.28SKU: FLM-325-NA4
Bosch Supervised Output Module, FLM-325-NA4
- Contacts are rated 2 A at 24 VDC
- Flexible application and quick response to emergency conditions
- Can be alarmed or reset by zone or by individual address
- Module address programming with the D5070 Analog Device Programmer
- Bi-colored LED provides module status
$96.28Low Price Guarantee - $47.01SKU: DS7465I
Bosch Input-Output Module, DS7465I
- Supervises one power-limited input zone
- Provides one output relay
- Can be used in UL Listed fire and security applications
- DIP switch programmable
$47.01Low Price Guarantee - $37.94SKU: DS7461i
Bosch Single-Zone Input Module, DS7461i
- Supervises one power-limited protection loop
- Can be used in UL Listed fire and security applications
- DIP switch programmable
$37.94Low Price Guarantee - $44.50SKU: DS7460I
Bosch Dual-Zone Input Module, DS7460I
- Supervises two protection loops
- Can be used in UL Listed fire and security applications
- DIP switch programmable
$44.50Low Price Guarantee - $99.00$99.00Low Price Guarantee
- $251.38SKU: C900V2
Bosch C900V Dialer Capture Ethernet Module
- Captures alarm and event data from dialer-based control panels using CONTACT ID, SIA, Modem II, Modem IIe, Modem IIIa2, Pulse, and other formats
- Performs full data transmissions without changing the data
- 12 VDC to 24 VDC voltage range
- Re-routes signals using UDP/IP-based data networks
- Convenient connection (RJ-45 Jack) to Ethernet networks
$251.38Low Price Guarantee - $953.00$953.00Low Price Guarantee
- $90.25SKU: NACIM
Bosch Notification Appliance Circuit Interface Module, NACIM
- Used to convert fire alarm control panel (FACP) notification appliance circuits (NACs) to open collector circuits
- Facility Communications System
- NACIM can be connected to either 12 V or 24 V NACs
- An end-of-line (EOL) resistor must be installed across the TB2 terminals on the NACIM
$90.25Low Price Guarantee - $122.72SKU: FPE-1000-CITY
Bosch City Tie Plug-in Module, FPE-1000-CITY
- Provides two supervised City Tie Local Energy circuits or Reverse Polarity circuits
- Connects to a Master Box (Local Energy Mode) or Central Station (Reverse Polarity Mode)
$122.72Low Price Guarantee - $51.66SKU: AVSM-W
Bosch Synchronization Control Modules, White, AVSM-W
- Synchronize horn and strobe with only two wires
- Option to silence horns while strobes continue to flash
- Operates in one Class A circuit or in two Class B circuits
- Circuits rated for 3 A of continuous current; 5 A surge or inrush current
- Green LED indicates signal operation
$51.66Low Price Guarantee - $50.83SKU: AVSM-R
Bosch Synchronization Control Modules, Red, AVSM-R
- Synchronize horn and strobe with only two wires
- Option to silence horns while strobes continue to flash
- Operates in one Class A circuit or in two Class B circuits
- Circuits rated for 3 A of continuous current; 5 A surge or inrush current
- Green LED indicates signal operation
$50.83Low Price Guarantee - $448.00SKU: API-AEC21-8I8O
Bosch Access Easy Controller 2.1 8 Input-Output Board, API-AEC21-8I8O
- 4 readers expandable to 32 readers
- Supports up to 20,480 card holders and 100,000 transactions
- Classify cardholders based on 254 access groups
- 255 time schedules, 32 regular and 32 special holidays
- Anti-passback (APB) capabilities
$448.00Low Price Guarantee - $626.91SKU: API-AEC21-4WR
Bosch Access Easy Controller 2.1 4 Wiegand Reader with 8 Input-Output Board, API-AEC21-4WR
- 4 readers expandable to 32 readers
- Supports up to 20,480 card holders and 100,000 transactions
- Classify cardholders based on 254 access groups
- 255 time schedules, 32 regular and 32 special holidays
- Anti-passback (APB) capabilities
$626.91Low Price Guarantee - $1,394.50SKU: APC-AMC2-DCUA
Bosch Door Control Unit, APC-AMC2-DCUA
- Intelligent access manager for one or two entrances
- Four interfaces include the reader power supply (2 x Omron/Wiegand, 1 x RS-485, 1 x RS-232)
- Storage element
- LCD display for displaying information
- Self-controlling send and receive switching
$1,394.50Low Price Guarantee - $1,049.24SKU: APC-AMC2-4WCF
Bosch Door Controller, 4 Wiegand card reader interfaces, APC-AMC2-4WCF
- Intelligent access manager for one to eight entrances
- Four interfaces include the reader power supply
- Standard 2 GB compact flash
- LCD display for displaying information
- Self-controlling send and receive switching
$1,049.24Low Price Guarantee - $985.96SKU: APC-AMC2-4R4CF
Radionix by Bosch APC-AMC2-4R4CF AMC2 Door Controller
- Intelligent access manager for one to eight entrances
- Four interfaces include the reader power supply
- Standard 2 GB compact flash
- LCD display for displaying information
- Self-controlling send and receive switching
$985.96Low Price Guarantee - $26.50$26.50Low Price Guarantee
- $236.21SKU: 110064001
Interlogix 110064001 Power Communication Card Micro 5-All Version
- Power Flash Communication Card Micro Flash All Version
$236.21Low Price Guarantee - $94.75SKU: D113
Bosch D113 Battery Lead Supervision Module
- Works with 12 V nominal systems
- Meets NFPA 72 requirements for battery lead supervision for fire alarm control panels (FACPs)
$94.75Low Price Guarantee - $99.31SKU: B208
Radionix by Bosch B208 Octo Input Module
- Programmable input point functions
- Easy to read switch addressing
- 2 interconnect wiring connectors
- Provides eight points
$99.31Low Price Guarantee - $206.45SKU: B901
Radionix by Bosch B901 Door Access Control Module
- Direct interface to 26-bit Wiegand card readers
- Onboard buzzer output
- Supervised onboard point
- Request to Exit and Request to Enter inputs that can have a shunt only option
- Four door states: Locked, Unlocked, Secured, Fire Unlock
$206.45Low Price Guarantee - $653.00SKU: EFC-301FR
Everfocus EFC-301FR NAV TCP/IP Network Split Model Access Controller
- Network access is based on CAT-5, which can be used for communication (10M/100M Ethernet) and Power over Ethernet (POE)
- Web browser is used to access remote equipment and perform control and administration; no additional software is required
- SSL ensures secure web browser access
- Supports multiple languages including English and Chinese
- Supports online system upgrade
$653.00Low Price Guarantee - $204.00SKU: NXT-4x4
Keri Systems NXT-4X4 Input/Output Expansion Module
- 4 auxiliary Inputs and 4 auxiliary Outputs per module
- Re-assignable, Interchangeable with controller's door I/O
- 4-State Supervision on Inputs
- Flash Memory for easy upgrades
- Powered from Controller (standard) or optional standalone power supply
$204.00Low Price Guarantee - $1,662.57SKU: NXT-4D
Keri Systems NXT-4D 4 Door NXT Controller
- 4 Door/8 Reader Controller for Keri's NXT product line
- On-board TCP/IP connectivity - no network adapters required
- Manages 4 doors with In/Out capability when using NXT Readers
- Reduce cabling costs over RS-485, Current Loop, or other traditional networking schemes by using shielded CAT-5
- Utilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5/6 Network
$1,662.57Low Price Guarantee - $230.00SKU: 3458
Comelit 3458 Access Control Accessory Module for External Units, 316
- Flush-mounted 3 mm thick stainless steel plate for housing the access control module
- Used in conjunction with all entrance panels in the 316 range
- Dimensions 88x182x3 mm
$230.00Low Price Guarantee - $178.50SKU: M1KAM
ELK M1KAM Single Door Access Module
- Supervised Input for RTE (Request To Exit) Button/Device
- Supervised Input for Door Status Sensor
- Installs in place of an M1 Keypad and operates from the RS-485 4-Wire Keypad Data Bus
- Four selectable Time settings for "Request to Exit" and "Door Held Open"
- Hardware Watchdog Circuit
$178.50Low Price Guarantee - $1,660.00SKU: EX 16-BUN-3
ZKAccess EX16-BUN-3 Elevator Control Expansion Kit
- Designed specifically for elevator control, the EC10 panel and EX16 Expansion boards provide customers the most secure
- Floor access can be restricted based on various user credentials including fingerprint, proximity card and/or password
- Pre-defined time schedules can also be used to control floor access
- During normal visitor/business hours, unrestricted floor access can also be permitted (aka Passage mode)
- EC10 Elevator Control Panel can restrict access up to ten floors
$1,660.00Low Price Guarantee - $1,150.00SKU: EX 16-BUN-2
ZKAccess EX16-BUN-2 Elevator Control Expansion Kit
- Designed specifically for elevator control, the EC10 panel and EX16 Expansion boards provide customers the most secure
- Floor access can be restricted based on various user credentials including fingerprint, proximity card and/or password
- Pre-defined time schedules can also be used to control floor access
- During normal visitor/business hours, unrestricted floor access can also be permitted (aka Passage mode)
- Elevator Control Panel can restrict access up to ten floors
$1,150.00Low Price Guarantee - $700.00SKU: EX 16-BUN-1
ZKAccess EX16-BUN-1 Elevator Control Expansion Kit
- Designed specifically for elevator control, the EC10 panel and EX16 Expansion boards provide customers the most secure
- Floor access can be restricted based on various user credentials including fingerprint, proximity card and/or password
- During normal visitor/business hours, unrestricted floor access can also be permitted (aka Passage mode)
- EC10 Elevator Control Panel can restrict access up to ten floors
- EC10 panel can support up to three EX16 expension boards
$700.00Low Price Guarantee - $299.00SKU: EX16
ZKAccess EX16 Elevator Control Expansion Board
- Can restrict access up to an additional sixteen floors per board
$299.00Low Price Guarantee - $2,263.00SKU: EC10-BUN
ZKAccess EC10-BUN Elevator Control Module with Metal Cabinet & Power Supply
- Designed specifically for elevator control, the EC10 panel and EX16 floor extension boards provide customers the most secure
- Affordable access control solution available today for elevators
- Floor access can be restricted based on various user credentials including fingerprint, proximity card and/or password
- Pre-defined time schedules can also be used to control floor access
- EC10 Elevator Control Panel can restrict access up to ten floors
$2,263.00Low Price Guarantee


















































