Installation Tools & Supplies
- $57.93SKU: 3375
Triplett 3375 Compact Wire and Cable Tracing Kit with Carrying Case
- Pocket-Sized with Pocket Clip
- Small and Streamlined to get into tight places
- Adjustable Sensitivity / Volume Control
- Visual Signal Strength Indicator
- Contains Hi-Gain Hi-Impedance Amplifier
$57.93Low Price Guarantee - $15.72SKU: 15034C
Platinum Tools 15034C 3 Level Coaxial Cable Stripper for RG-59/62/6/6 Quad
- Works with RG-59/62/6/6 Quad coax cables
- Adjustable stripping depth for various insulation types and thicknesses
- Uses drop-in replacement blades, no cassettes required
- Hex wrench snaps into housing for convenient storage
- Molded from high impact plastic for long life
$15.72Low Price Guarantee - $8.80SKU: C-USB3-MicroB-6
Kramer C-USB3-MicroB-6 USB 3.0 A Male to Micro-B Male Cable, 6 Feet
- USB 3.0 A (Male) to Micro-B (Male)
- Transfer Rates up to 4.8Gbps - 10x the capability of USB 2.0
- Foil & Overall Braid Provide Maximum Protection Against EMI/RFI
- Molded Strain Relief
- Backward Compatibility - USB Specifications 1.0, 1.1 and 2.0
$8.80Low Price Guarantee - $5.90SKU: MC-1130-03FQ
Seco-Larm MC-1130-03FQ 4K High-Speed HDMI Cable, 28AWG, 3ft
- Gold-plated connectors for greater reliability and longer life
- 4K Support
- CL3 UL Rated Cable
- HDR Support
- Support Ethernet (100Mb/s)
$5.90Low Price Guarantee - $32.00SKU: C-DMA-5BM-15
Kramer C-DMA-5BM-15 DVI-A (M) to 5 BNC (M) Molded Breakout Cable 15 Feet
- Quality Construction - Rugged cable with molded connectors and gold-plated pins
- Compatibility - Use this adapter when you need access to the analog signal present at a DVI-I source, or when you need to connect analog RGBHV to a display that provides only a DVI-I input. Note that this adapter does not convert analog to digital or digital to analog. Always verify compatibility details for the source/destination in your application
- Varied Selection of Lengths - Available in versions of 0.9 to 4.6m (3, 6, 10 and 15ft)
$32.00Low Price Guarantee - $26.72SKU: MT-2019
Eclipse Tools MT-2019 Protective Multifunction Analog Multimeter
- Analog display
- Measurement up to 1000V
- LED & hFE Test
- Capacitance Measurement
- Overload Protection
$26.72Low Price Guarantee - $21.60SKU: C-GM-GF-10
Kramer C-GM-GF-10 Molded 15-pin HD Male - Female Cable, 10 Feet
- Quality Construction - High - resolution 26 gauge mini coax for video
- Easy Installation - Pre - terminated with molded 15 - pin HD connectors, gold plated pins and thumbscrews for easy connection
- Length - 10ft
- Cable Specs - See Kramer BC - 3X2T7S for detailed cable specs
$21.60Low Price Guarantee - $159.02$159.02Low Price Guarantee
- $574.29SKU: TEV500
Triplett TEV500 Pro Electric Vehicle Charger Test Kit
- Test charging stations for both basic & advanced diagnostic requirements
- PE Pre-Test: Allows testing the PE conductor for possible presence of dangerous voltage against earth
- Control Pilot (CP) State (Vehicle Simulation): With the CP State rotary switch selector various vehicle states can be simulated
- CP Signal State Output: For use with an oscilloscope to check the waveform and amplitude of the CP signals
- CP Error “E” simulation: Simulate the behavior of the station when there is an established short circuit between CP and PE
$574.29Low Price Guarantee
Installation Tools & Supplies Frequently Asked Questions
What tools do I need to install a surveillance camera?
To install a surveillance camera, you'll typically need a drill, screwdriver, and various installation tools like cable strippers and crimpers. Additionally, having a level and measuring tape can help ensure proper placement. Depending on the type of camera, you may also need specific cables, connectors, and mounting hardware, which are often included in the camera kit.
How do I choose the right cable for my surveillance system?
The right cable for a surveillance system depends on the camera type and distance from the recording device. Common options include coaxial cables for analog cameras and Ethernet cables for IP cameras. Ensure the cable is compatible with your system's specifications, such as gauge and shielding type, to maintain video quality and prevent interference.
What is the purpose of a keystone jack in surveillance installation?
A keystone jack is used to connect cables in a structured wiring system, providing a secure and organized way to connect surveillance cameras to networking equipment. It allows for easy insertion and removal of cables, facilitating maintenance and upgrades. Using keystone jacks can help manage cable clutter and improve the overall aesthetics of your installation.
Do I need special tools for terminating alarm wire?
Yes, terminating alarm wire requires specific tools, such as a wire stripper, crimper, and possibly a punch-down tool for connecting wires to terminals. These tools ensure proper connections and minimize signal loss, which is crucial for the reliability of your alarm system. Using the right tools can also prevent damage to the wires during the termination process.
What should I consider when selecting installation supplies for my surveillance system?
When selecting installation supplies, consider the type of surveillance system, the environment (indoor or outdoor), and the distance between components. Look for high-quality cables, connectors, and tools that match the specifications of your cameras and recording devices. Additionally, ensure that the supplies are compatible with the installation location to avoid issues like signal loss or physical damage.
Filter
Shopping Options
