Data Transmission
Move data reliably between cameras, recorders, and control rooms with our data transmission gear. Extend Ethernet or HDMI runs with extenders, push IP across legacy coax using IP over coax, and keep signals clean with repeaters and hubs. Need protocol conversion? See data converters. For phone and low-voltage runs, head to data & telephone. Build longer, smarter links without sacrificing video quality.
Featured Data Transmission Manufacturers
- $1,679.74SKU: FDX55S2E
Comnet FDX55S2E RS232/422, DB25 Repeater, SM, 1 Fiber
- Meets EIA RS232C/D specifications (Simplex or Duplex)
- NTCIP compatible
- Robust design assures extremely high reliability in unconditioned roadside environments
- User-selectable DTE or DCE interface ensures ease of installation and maximum versatility
- Supports Request to Send (RTS) and Clear to Send (CTS) signals
$1,679.74Low Price Guarantee - $1,671.79SKU: GLFE4EOU
Ganz GLFE4EOU 4 Channel Ethernet Over UTP with Pass-through PoE (15W)
- Increased Distance - expands transmission distances from 300 feet for traditional UTP to 3000 feet for UTP and 5000 feet for COAX
- Cost-Effective - saves cost of new media and installation labor
- Extends PoE Distances
- Solves Density Challenges; 1, 4, and 16 channel COAX and UTP models
- Easy installation, just connect and go
$1,671.79Low Price Guarantee - was $1,643.09 Special Price $1,603.00SKU: RLFDX485S2/HV
Comnet RLFDX485S2/HV Substation-Rated RS-422 And RS-485 2/4 Wire Data Link/Repeater, 88 to 300 VDC / 85 to 264
- Full-duplex, half-duplex, or simplex transmission of RS-232, RS-422, RS-485 2/4-wire data, or TTL logic
- Tested and certified to meet or exceed the requirements of IEEE 1613 Class 2 for electrical utility substations
- RS-232 Version: DTE/DCE switching
- LED status indicators confirm operating status
- Rugged galvannealed and powder-coated panel-mount enclosure
was $1,643.09 Special Price $1,603.00Low Price Guarantee - $1,572.11SKU: FDX57S1
Comnet FDX57S1 RS232/422/485 2&4W Digitally Encoded Self-Healing Ring, SM, 1 Fiber
- Meets EIA RS232 and RS422/RS485 (2 or 4-wire) specifications (Simplex or Duplex Operation)
- Two Data Channel Capability: One full duplex or two half-duplex channels
- Only one optical fiber required between units for Fault Tolerant/Self-Healing Ring Operation
- Full data re-clocking and regeneration: no limit to the number of transceiver units used within the network
- Supports supervised multiple master architecture for unparalleled network reliability
$1,572.11Low Price Guarantee - $1,550.00SKU: 22-00004590
Kramer 22-00004590 HighSecLabs Dual Head 4-Port 4K30 UHD DisplayPort KVM Switch with sUSB
- 4K30 UHD Resolution — Supports resolutions up to 3840×2160 @30Hz
- Extended/Duplicated Display Support — Enables switching keyboard, mouse and up to 2 displays (either extended or duplicated) between computers
- Multi Display Support — Change to KM mode to enable switching keyboard and mouse control between computers, when each computer is connected to up to 4 displays (either extended or duplicated)
- Freeze USB — Assign the USB port to a specific computer while switching the keyboard, video, mouse and audi
- peripherals between other computers. Useful when a USB device such as a disk–on–key must remain mapped to a certain computer, while the user is working on another computer
$1,550.00Low Price Guarantee - $1,526.00SKU: CLFE4EOU
Comnet CLFE4EOU Four-Channel Ethernet Over UTP Extender With Pass-through PoE
- Transmits individual Ethernet data channels with Passthrough PoE over standard UTP
- Extends Ethernet up to 3,000 feet (914 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over UTP cable
- Extended temperature operation from -40°C to +75°C
- Extended Pass-through PoE meets the IEEE 802.3af standard for Power over Ethernet
- Full 10/100 Mbps Bandwidth
$1,526.00Low Price Guarantee - $1,522.85SKU: RLFDX485S2/48DC
Comnet RLFDX485S2/48DC Substation-Rated RS-422 And RS-485 2/4 Wire Data Link/Repeater, 48VDC
- Full-duplex, half-duplex, or simplex transmission of RS-232, RS-422, RS-485 2/4-wire data, or TTL logic
- Tested and certified to meet or exceed the requirements of IEEE 1613 Class 2 for electrical utility substations
- RS-232 Version: DTE/DCE switching
- LED status indicators confirm operating status
- Rugged galvannealed and powder-coated panel-mount enclosure
$1,522.85Low Price Guarantee - $1,493.30SKU: NC331
Alpha NC331 4-Port Station Hub (TC3000)
- Tek-CARE system capacity of up to 150 Tek-CARE Hubs
- Provides four ports to support Master Stations and Addressable Stations
- Supports up to: Two Master Station Consoles (NC404TS or NC415G3) or
One Master Station Console and nine Addressable Stations (three per port) or
Twelve Addressable Stations (3 per port) - Provides one audio channel per port
$1,493.30Low Price Guarantee - $1,471.10SKU: RLFDX232S2/24DC
Comnet RLFDX232S2/24DC Substation-Rated RS-232 And TTL Logic Data Link/Repeater, 24VDC
- Full-duplex, half-duplex, or simplex transmission of RS-232, RS-422, RS-485 2/4-wire data, or TTL logic
- Tested and certified to meet or exceed the requirements of IEEE 1613 Class 2 for electrical utility substations
- RS-232 Version: DTE/DCE switching
- LED status indicators confirm operating status
- Rugged galvannealed and powder-coated panel-mount enclosure
$1,471.10Low Price Guarantee - $1,440.00SKU: RR-86C-SL
American Fibertek RR-86C-SL Phone Line Interface
- Standard Telephone Interface
- One Singlemode Fiber
- Diagnostics: Power and Optical Presence
- Voice and FAX
- Includes: Contact from Handset to Line
$1,440.00Low Price Guarantee - $1,440.00SKU: MT-86C-SL
American Fibertek MT-86C-SL 1 Fiber Module Handset Device, Single-Mode
- Standard Telephone Interface
- One Singlemode Fiber
- Diagnostics: Power and Optical Presence
- Voice and FAX
- Includes: Contact from Handset to Line
$1,440.00Low Price Guarantee - was $1,617.81 Special Price $1,364.00SKU: RLFDX485S2/24DC
Comnet RLFDX485S2/24DC Substation-Rated RS-422 And RS-485 2/4 Wire Data Link/Repeater, 24VDC
- Full-duplex, half-duplex, or simplex transmission of RS-232, RS-422, RS-485 2/4-wire data, or TTL logic
- Tested and certified to meet or exceed the requirements of IEEE 1613 Class 2 for electrical utility substations
- RS-232 Version: DTE/DCE switching
- LED status indicators confirm operating status
- Rugged galvannealed and powder-coated panel-mount enclosure
was $1,617.81 Special Price $1,364.00Low Price Guarantee - $1,345.00SKU: D9130
GE Security Interlogix D9130 RS232, Data Repeater, SM Laser, 2 Fibers, Db25
- Meets EIA RS-232 C/D Specifications (Simplex or Duplex)
- NTCIP Compatible
- Robust Design Assures Extremely High Reliability In Unconditioned Roadside Environments
- User-Selectable Local, Master or Bus operation and DTE or DCE Interface Ensured Ease of Installation and Maximum Versatility
- Supports Request to Send (RTS) and Clear to Send (CTS) Signals
$1,345.00Low Price Guarantee - $1,296.81SKU: 900-00550
Kramer 900-00550 TX2 Table Hub for AV Systems
- AV Infrastructure for Meeting Rooms
- Connect to DX2 Room Hub over Ethernet
- Connect Laptop to USB-C or HDMI Inputs
- Uncompressed 4K60 4:4:4 8-Bit Video
- Independent EDID Control of Each Input
$1,296.81Low Price Guarantee - $1,209.00SKU: TEU-F04
Hanwha Vision TEU-F04 4 Channel Ethernet over UTP Extender With Pass-Through PoE
- Transmits individual Ethernet data channels with Pass-through PoE over standard UTP cable
- Extends Ethernet up to 5,000 feet (1,524 m) at 10 Mbps or 2,000 feet (610m) at 100 Mbps over Coaxial cable
- Extended temperature operation from -40°C to +75°C
- Extended Pass-through PoE meets the IEEE 802.3af standard for Power over Ethernet
- Full 10/100 Mbps Bandwidth
$1,209.00Low Price Guarantee - $1,200.00SKU: EXT3-C-XR-T
Kramer EXT3-C-XR-T USB–C Transmitter with USB, Ethernet, RS–232, & IR over Extended–Reach HDBaseT 3.0
- Ethernet Extension - Ethernet interface data flows in both directions allowing extension of up to 1 Gbps Ethernet connectivity for LAN communication and device control
- Bidirectional RS - 232 Extension - Serial interface data flows in both directions allowing data transmission and device control
- Bidirectional Infrared Extension - IR interface data flows in both directions allowing remote control of peripheral devices located at either end of the extended line
- Cost - effective Maintenance - Status LED indicators for HDMI, Loop, HDBT, and USB active host ports, facilitate easy local maintenance and troubleshooting
- Easy and Elegant Installation - MegaTOOLS™fan - less enclosure for dropped - ceiling mounting, or side - by - side mounting of 2 units in a 1U rack space with the recommended rack adapter
$1,200.00Low Price Guarantee - $1,196.56SKU: LTC 8564/20
Bosch LTC 8564-20 Receiver/Driver, 24vac Pan/Tilt Voltage
- Full-featured pan/tilt/zoom/aux control
- Auto-pan/random pan
- Bi-Phase or RS-232 data input
- 99 Pre-positions with tour capability
- Pre-positions compatible with 360° continuous pan/tilt drives
$1,196.56Low Price Guarantee - $1,147.00SKU: CLKFE1POEC
Comnet CLKFE1POEC Copperkit Two Single Channel Ethernet COAX Extenders
- Copperkit two single channel ethernet COAX extenders
$1,147.00Low Price Guarantee - $1,147.00SKU: CLKFE1POEU
Comnet CLKFE1POEU Copperkit Two Single Channel Ethernet UTP Extenders
- Copperkit two single channel ethernet UTP extenders
$1,147.00Low Price Guarantee - $1,050.90SKU: 500487
MuxLab 500487 HDMI 2.0 Fiber Dongle Extender Kit
- Supports resolution up to 4K60
- Supports distance up to 300m
- Requires power only on the receiver side
- Supports EDID and HDCP
- Supports Dolby Vision and HDR10+
$1,050.90Low Price Guarantee - $1,050.00SKU: EXT3-POE-XR-R
Kramer EXT3-POE-XR-R Receiver with Bidirectional PoE, USB, Ethernet, RS–232, & IR over Extended–Reach HDBaseT 3.0
$1,050.00Low Price Guarantee - $1,034.98SKU: SPX-1300
West Penn SPX-1300 Wiegand Reader Extender, RS‑485
- Functionality: Extends Wiegand reader signals using RS-485 communication
- Compatibility: Works with most standard Wiegand readers and controllers
- Distance Support: Enables long-range transmission beyond typical Wiegand cable limits
- Design: Compact module for easy integration into enclosures or panels
- Performance: Maintains secure, accurate data transfer with minimal signal loss
$1,034.98Low Price Guarantee - $1,011.00SKU: LTC 8566/60
Bosch LTC 8566-60 Receiver/Driver, 24vac Pan/Tilt Voltage
- Full-featured pan/tilt/zoom/aux control
- Auto-pan/random pan
- Bi-Phase or RS-232 data input
- 99 Pre-positions with tour capability
- Pre-positions compatible with 360° continuous pan/tilt drives
$1,011.00Low Price Guarantee - $950.00SKU: EXT3-XR-TR
Kramer EXT3-XR-TR HDMI Extender with USB, Ethernet, RS–232, & IR over Extended–Reach HDBaseT 3.0
$950.00Low Price Guarantee - $897.00SKU: FDX2HSDM2/M
Comnet FDX2HSDM2/M Dual High Speed RS485 Data Transceiver, Repeater
- Data Rates to 1Mbps
- Meets RS485 (2W) specifications
- Built-in Fiber Link Tester - allows for the testing of the fiber
- Wide optical dynamic range: optical attenuators are never required
- Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
$897.00Low Price Guarantee - $879.70SKU: RR-86C
American Fibertek RR-86C Phone Line Interface
- Standard Telephone Interface
- One Multimode Fiber
- Diagnostics: Power and Optical Presence
- Voice and FAX
- Economical
$879.70Low Price Guarantee - $840.72SKU: 500759-TX-Dante
MuxLab 500759-TX-Dante HDMI/Dante over IP PoE Transmitter, UHD-4K
- Configure a Video Wall array with 100's of displays, depending on network bandwidth
- Supports video up to 4K @ 30Hz (4:4:4), 4K @ 60Hz (4:2:0) and HDR at 4K @ 30Hz (4:2:2)
- Visually lossless video (1 frame latency)
- Distribute audio to 100's of Dante supported devices
- Supports 2CH audio insert Supports point-to-point, point-to-multipoint and multipoint-to-multipoint applications
$840.72Low Price Guarantee - $798.91SKU: FDX55M2E
Comnet FDX55M2E RS232/422, DB25 Repeater, MM, 1 Fiber
- Meets EIA RS232C/D specifications (Simplex or Duplex)
- NTCIP compatible
- Robust design assures extremely high reliability in unconditioned roadside environments
- User-selectable DTE or DCE interface ensures ease of installation and maximum versatility
- Supports Request to Send (RTS) and Clear to Send (CTS) signals
$798.91Low Price Guarantee - $785.00$785.00Low Price Guarantee
- $776.31SKU: 500449
MuxLab 500449 HDMI 2.0 KVM HDBT Extender Kit, 100m
- Supports HDMI 2.0b (4K/60 4:4:4) & HDCP2.2
- Supports 18Gbps video bandwidth
- 4K/60Hz transmission distance up to328ft/100m over single CAT 6A/7 cable
- 1080p/60Hz transmission distance up to492ft/150m over single CAT 6/6A/7 cable
- Supports HDR, HDR10,HDR10+, Dolby Vision and HLG pass through
$776.31Low Price Guarantee - $748.06SKU: 500536
MuxLab 500536 USB-C 3.2 Gen1 Dual HDMI Extender Kit, 100m
- Extension of USB 3.2 Gen1 up to 100m/328ft over CAT6a cable
- USB 3.2 Gen1 connectivity with data transfer rate up to 5Gbps
- Built-in DisplayLink technology for video over USB on dual HDMI outputs, supporting up to 4K/60Hz
- Backwards compatible with USB 2.0 and USB 1.1
- Hardware acceleration for isochronous and bulk transfer
$748.06Low Price Guarantee - $741.00SKU: CLLFE1POEC
Comnet CLLFE1POEC Local 1 Channel Ethernet-over-COAX Extender With 30W PSE PoE+
- Transmits individual Ethernet data channels with PoE+ Power Injection or Pass-through PoE+ over Coaxial cable
- Extends Ethernet up to 5,000 feet (1,524 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over Coaxial cable
- Extended temperature operation from -40°C to +75°C
- Extended Pass-through PoE meets the IEEE 802.3at standard for Power over Ethernet
- Full 10/100 Mbps Bandwidth
$741.00Low Price Guarantee - $740.00SKU: GLFE1EOU
Ganz GLFE1EOU 1 Channel Ethernet Over UTP with Pass-through PoE (15W)
- Increased Distance - expands transmission distances from 300 feet for traditional UTP to 3000 feet for UTP and 5000 feet for COAX
- Cost-Effective - saves cost of new media and installation labor
- Extends PoE Distances
- Solves Density Challenges; 1, 4, and 16 channel COAX and UTP models
- Easy installation, just connect and go
$740.00Low Price Guarantee - $722.00SKU: 500535
MuxLab 500535 USB-C 3.2 Gen1 4-Port WP Extender Kit, 100m
- Extension of USB 3.2 Gen1 up to 100m/328ft over CAT6a cable
- USB 3.2 Gen1 connectivity with data transfer rate up to 5Gbps
- Backwards compatible with USB 2.0 and USB 1.1
- Hardware acceleration for isochronous and bulk transfer
- USB-C and USB-A Ports supports 5VDC up to 1.5A and 1A on the Receiver
$722.00Low Price Guarantee - $719.95SKU: VZ-1TRX-IP-TX-POE
ViewZ VZ-1TRX-IP-TX-POE IP Based HDMI Extension Transmitter
- Supports Resolutions up to 4K/ HDCP 1.4, 2.0 & 2.3
- Support HDMI loop-through on TX
- Support HDR 10 / HDR 10+ / Dolby Vision
- Support Extension, Unicast, Multicast & Videowall
- Seamless KM Switching on TX & RX
$719.95Low Price Guarantee - $719.95SKU: VZ-1TRX-IP-RX-POE
ViewZ VZ-1TRX-IP-RX-POE IP Based HDMI Extension Receiver
- Supports Resolutions up to 4K/ HDCP 1.4, 2.0 & 2.3
- Support HDMI loop-through on TX
- Support HDR 10 / HDR 10+ / Dolby Vision
- Support Extension, Unicast, Multicast & Videowall
- Seamless KM Switching on TX & RX
$719.95Low Price Guarantee - $711.00SKU: GKFE1EOU
Ganz GKFE1EOU 2 × Single Channel Ethernet Over UTP Extender with Pass-Through PoE (GLFE1EOU)
- Increased Distance - expands transmission distances from 300 feet for traditional UTP to 3000 feet for UTP and 5000 feet for COAX
- Cost-Effective - saves cost of new media and installation labor
- Extends PoE Distances
- Solves Density Challenges; 1, 4, and 16 channel COAX and UTP models
- Easy installation, just connect and go
$711.00Low Price Guarantee - $711.00SKU: GKFE1EOC
Ganz GKFE1EOC 2 × Single Channel Ethernet-Over-Copper Extender with Pass-Through PoE (GLFE1EOC)
- Increased Distance - expands transmission distances from 300 feet for traditional UTP to 3000 feet for UTP and 5000 feet for COAX
- Cost-Effective - saves cost of new media and installation labor
- Extends PoE Distances
- Solves Density Challenges; 1, 4, and 16 channel COAX and UTP models
- Easy installation, just connect and go
$711.00Low Price Guarantee - $705.00$705.00Low Price Guarantee
- $664.67SKU: RLFDX232M2/HV
Comnet RLFDX232M2/HV Substation-Rated RS-232 And TTL Logic Data Link/Repeater, 88 -300VDC / 85 -264VAC
- Full-duplex, half-duplex, or simplex transmission of RS-232, RS-422, RS-485 2/4-wire data, or TTL logic
- Tested and certified to meet or exceed the requirements of IEEE 1613 Class 2 for electrical utility substations
- RS-232 Version: DTE/DCE switching
- LED status indicators confirm operating status
- Rugged galvannealed and powder-coated panel-mount enclosure
$664.67Low Price Guarantee - $645.00SKU: CLEK11EOC
Comnet CLEK11EOC CopperLine Value Kit Point-to-Point Mini Ethernet-Over-Coax Extender
- Transmits individual Ethernet data over Coaxial cable
- Extends Ethernet up to 1,200 feet (400 m) over Coaxial cable
- Temperature operation from -0°C to +50°C
- Full 10/100 Mbps Bandwidth
- Supports Multicast, Unicast and Jumbo Frame
$645.00Low Price Guarantee - $629.00SKU: CLRVE2COAX
Comnet CLRVE2COAX ComFit 2 Channel Analog and IP Video over COAX Receiver
- Simultaneous transmission of IP video, and composite analog video up to 500m over RG59 coaxial cable
- Proprietary adaptive analog equalizer for extending the reach of composite analog video
- Full-duplex digital communications
- Continuous Transmitter to Receiver Ethernet throughput up to 36Mbps
$629.00Low Price Guarantee - was $664.67 Special Price $629.00SKU: RLFDX232M2/48DC
Comnet RLFDX232M2/48DC Substation-Rated RS-232 And TTL Logic Data Link/Repeater, 48VDC
- Full-duplex, half-duplex, or simplex transmission of RS-232, RS-422, RS-485 2/4-wire data, or TTL logic
- Tested and certified to meet or exceed the requirements of IEEE 1613 Class 2 for electrical utility substations
- RS-232 Version: DTE/DCE switching
- LED status indicators confirm operating status
- Rugged galvannealed and powder-coated panel-mount enclosure
was $664.67 Special Price $629.00Low Price Guarantee - $598.00SKU: CNFE2CL2MC
Comnet CNFE2CL2MC 2 Ethernet Channels over 2 Twisted Pair or 2 Coax
- Utilizes the latest VDSL2 technology for the fastest data rate transmission and greatest transmission distance.
- Two-Channel Design: Contains two independent EoVDSL modem units in one compact package. Ideal for multiplechannel Ethernet-over-VDSL applications where rack or shelf/wall space may be limited
- Supports transmission distances of up to 10,000 ft. (3 km) over twisted copper, or up to 1500 ft. (457 m) over coaxial cable
- Symmetric data transmission rates of up to 91 Mbps
- Automatically sets fastest possible data rate vs. cable quality and transmission distance
$598.00Low Price Guarantee - $590.45SKU: EBRIDGE4CR
Altronix EBRIDGE4CR EoC 4 Port Receiver, 25Mbps per port, 24/56VDC or 24VAC, Requires Compatible Transceiver
- Retrofit digital IP cameras in an analog CCTV installation
- Works with Megapixel, HD720, HD1080 and VGA (SD) cameras
- Extend Network link distance in an industrial environment
- Upgrade deployed CCTV coax to a digital network for Retail, Casinos, Airports, Schools, Hospitals, etc.
- Enables simultaneous transmission of composite and digital IP video
$590.45Low Price Guarantee - $587.00SKU: COMPAK1EOC
Comnet COMPAK1EOC Ethernet Over Twisted Pair or Coaxial Cable
- Supports transmission distances of up to 10,000 ft (3 km) over twisted copper, or up to 1500 ft (457 m)over coaxial cable
- Symmetric line rates of over 91 Mbps
- Automatically sets fastest possible data rate vs. cable quality and transmission distance
- IEEE 802.3 Compliant. 10/100 BASE-T/TX Ethernet port with automatic MDI/MDI-X crossover
- Screw Terminals for twisted copper circuits, or BNC connector for coaxial cable
$587.00Low Price Guarantee - $587.00SKU: RLFDX485M2/48DC
Comnet RLFDX485M2/48DC Substation-Rated RS-422 And RS-485 2/4 Wire Data Link/Repeater, 48VDC
- Full-duplex, half-duplex, or simplex transmission of RS-232, RS-422, RS-485 2/4-wire data, or TTL logic
- Tested and certified to meet or exceed the requirements of IEEE 1613 Class 2 for electrical utility substations
- RS-232 Version: DTE/DCE switching
- LED status indicators confirm operating status
- Rugged galvannealed and powder-coated panel-mount enclosure
$587.00Low Price Guarantee - $587.00SKU: RLFDX485M2/HV
Comnet RLFDX485M2/HV Substation-Rated RS-422 And RS-485 2/4 Wire Data Link/Repeater, 88 -300VDC / 85 -264
- Full-duplex, half-duplex, or simplex transmission of RS-232, RS-422, RS-485 2/4-wire data, or TTL logic
- Tested and certified to meet or exceed the requirements of IEEE 1613 Class 2 for electrical utility substations
- RS-232 Version: DTE/DCE switching
- LED status indicators confirm operating status
- Rugged galvannealed and powder-coated panel-mount enclosure
$587.00Low Price Guarantee - $584.58SKU: D9110
GE Security Interlogix D9110 RS232: Data Repeater, MM, 2 Fibers, Db25
- Meets EIA RS-232 C/D Specifications (Simplex or Duplex)
- NTCIP Compatible
- Robust Design Assures Extremely High Reliability In Unconditioned Roadside Environments
- Supports Request to Send (RTS) and Clear to Send (CTS) Signals
- RJ-45 expansion port provides network branching capability by electrically linking colocated transceiver units
$584.58Low Price Guarantee - $572.00SKU: 20-80568190
Kramer 20-80568190 USB 2.0 PoC Wall-Plate Extender Kit Over Extended-Reach CAT
- Comprehensive USB Extender — Plug & play USB extender kit for providing extended–reach CAT signals and 2–way power over twisted pair copper infrastructures. A local USB host is auto–connected to remote–connected USB devices employing either interrupt, bulk or isochronous USB 2.0 standard data transfer communication
- Flexible USB Connectivity — Wide Variety of USB peripheral devices can be extended including cameras, touch screens, smart boards, hard drives, game controllers, audio devices, printers, scanners, or HID (Human Interface Devices) devices such as a mouse or keyboard. Dual role and OTG (On The Go ) devices such as smart phones and tablets, connected either to a transmitter–side USB host port or receiver–side USB device port, can communication with a remote host or peripheral pairing device
- Remote USB Charging — Fast USB charging of peripheral devices when the receiver is powered by a power supply, and standard USB charging when the receiver is powered by the transmitter via CAT
- Bidirectional RS–232 Extension — Serial interface data flows in both directions, allowing data transmission and device control
$572.00Low Price Guarantee
Data Transmission Frequently Asked Questions
What is data transmission in surveillance systems?
Data transmission in surveillance systems refers to the process of sending video and audio signals from cameras to recording devices or monitors. This can be achieved through various methods, including wired connections like Ethernet and coaxial cables, or wireless technologies. Reliable data transmission is crucial for ensuring high-quality video feeds and maintaining system integrity.
How does Power over Ethernet (PoE) work?
Power over Ethernet (PoE) allows network cables to carry electrical power along with data, eliminating the need for separate power sources for devices like IP cameras. This technology simplifies installation and reduces clutter by using a single cable for both data and power, making it ideal for surveillance setups where cameras may be installed in hard-to-reach locations.
What are the benefits of using Ethernet over coaxial adapters?
Ethernet over coaxial adapters enable the transmission of Ethernet data over existing coaxial cabling, which can be beneficial for upgrading older surveillance systems without extensive rewiring. These adapters maintain signal integrity over long distances and can support Power over Ethernet, providing both power and data to cameras through the same coaxial cable, enhancing installation flexibility.
Can I extend the range of my surveillance system's data transmission?
Yes, you can extend the range of your surveillance system's data transmission using extenders or adapters designed for this purpose. Devices like Ethernet over coax extenders can significantly increase the distance over which data can be transmitted, allowing you to place cameras farther from your recording equipment without losing signal quality or reliability.
What should I consider when choosing a data transmission solution for surveillance?
When selecting a data transmission solution for surveillance, consider factors such as the distance between your cameras and recording devices, the type of cabling already in place, and whether you need Power over Ethernet capabilities. Additionally, assess the bandwidth requirements of your cameras to ensure that the chosen solution can handle the data load without compromising video quality.
Filter
Shopping Options
