Power
- $122.00SKU: PS-A24060
Comnet PS-A24060 Hardened 24VDC, 60W Industrial Power Supply
- Overload, overvoltage and short-circuit protection
- Flexible Power continuity up to 65 W
- DIN Rail Mountable
- Small size
$122.00Low Price Guarantee - $122.00SKU: PS-A12060
Comnet PS-A12060 Hardened 12VDC, 60W Industrial Power Supply
- Overload, overvoltage and short-circuit protection
- Flexible Power continuity up to 65 W
- DIN Rail Mountable
- Small size
$122.00Low Price Guarantee - $99.05SKU: CNSG2PB
Comnet CNSG2PB Dual Channel Ethernet Surge Suppression, BT PoE Type4 Compliant
- Dual-channel (2-port) Ethernet surge suppressor; IEEE 802.3bt Type 4 PoE compliant, supporting up to 100W PSE output / approximately 71.3W delivered to the powered device per channel
- Type 4 PoE compatibility: surge suppressors rated only for legacy 802.3af/at standards can become a bottleneck or fail when high-power Type 3/4 PDs are installed — the CNSG2PB is rated for the full power and data pass-through of the latest PoE standard
- Protects against voltage surges and transients from lightning strikes and electrical disturbances on both Ethernet channels simultaneously, reducing equipment damage risk at exposed or outdoor camera and network device installation points
$99.05Low Price Guarantee - $475.00SKU: VS-L6Q-SPEB
Pelco VS-L6Q-SPEB L6Q Solar Panel Expansion Battery Only
- Additional 12V 18Ah expansion battery
- Solar Battery Expansion Y cable
- 12V, 4A battery charger with 2-pin output plug
- Used to charge the battery without solar panel
$475.00Low Price Guarantee - $250.00SKU: VS-L6Q-120VAC
Pelco VS-L6Q-120VAC L6Q 120V AC External Power Supply
- 15FT 120V AC power supply for L6Q camera system
- This may be used in locations that have a 120V AC power source (3 prong grounded power outlet)
$250.00Low Price Guarantee - $1,224.00SKU: OHEP90INJO1
Pelco OHEP90INJO1 Power Injector PoE (90W), 1 Channel for Outdoor Installations
- Power Injector PoE (90W), 1 channel, for outdoor installations
- Input voltage: from 100Vac up to 240Vac
- Weatherproof standard IP66, NEMA 4X
$1,224.00Low Price Guarantee - $800.00SKU: VS-L6Q-40WSP
Pelco VS-L6Q-40WSP L6Q Solar Panel Expansion Only - No Battery
- L6Q 45W Solar Panel Expansion
- Y cable to tether to primary panel
- Batteries not included
$800.00Low Price Guarantee - $40.00SKU: PWR-24VAC-Transformer
ICRealtime PWR-24VAC-Transformer 24VAC 1.67A 40VA Power Transformer for Security Camera
- 24VAC output power transformer for security cameras and surveillance devices
- Delivers up to 1.67A output current with a 40VA power rating
- Provides stable, continuous power for reliable camera performance
- Screw-down terminal connections for secure and easy wiring
- Compatible with security cameras and accessories requiring 24VAC input
$40.00Low Price Guarantee - $130.58SKU: APCRBC162
APC APCRBC162 Replacement Battery Cartridge #162
- 12V 6.5AH replaceable battery for APC Back-UPS Pro
- Brand new battery shipped from strictly managed warehouse
- Peace of mind with 2-year warranty and UPS safety certifications
- Lead-acid battery
$130.58Low Price Guarantee - $12,285.00SKU: SRT6KRMXLT-A
APC SRT6KRMXLT-A Smart-UPS On-Line, 6kVA/6kW, Rackmount 4U, 208V Extended Runtime with Rail Kit [TAA]
- Replacement battery (1) is available
- 6kVA/6kW online double-conversion (pure sine wave output) UPS in a 4U rackmount form factor
- Ideal for protecting critical servers, storage, networking equipment, medical labs, and light industrial applications
- Includes a Network Management Card for remote monitoring and control
- SmartSlot allows for additional communication options
$12,285.00Low Price Guarantee - $7,923.83SKU: SRT5KRMXLT-A
APC SRT5KRMXLT-A Smart-UPS On-Line, 5.4kVA, Rackmount 3U, 208V Extended Runtime with Rail Kit [TAA]
- Replacement battery (1) is available
- 5.4kVA/4.8kW online double-conversion (pure sine wave output) UPS in a 3U rackmount form factor
- Ideal for protecting critical servers, storage, networking equipment, medical labs, and light industrial applications
- Includes a Network Management Card for remote monitoring and control
- SmartSlot allows for additional communication options
$7,923.83Low Price Guarantee - $3,940.00SKU: SRT1500RMXLA-NCUS
APC SRT1500RMXLA-NCUS Smart-UPS SRT 1500VA LCD Rackmount 120V with Network Card [TAA]
- 1500VA/1350W double-conversion on-line pure sine wave 2U rackmount UPS
- Ideal for servers, storage, voice/data networks, medical labs, and light industrial applications
- Rack/Tower convertible (rail kit included)
- Delivers clean power with zero transfer time for critical or sensitive devices
- Add up to 10 external battery packs (SRT48RMBP) for extended runtime
$3,940.00Low Price Guarantee - $12,200.00SKU: SRT10KRMXLT-A
APC SRT10KRMXLT-A Smart-UPS On-Line, 10kVA/10kW, Rackmount 6U, 208V with Rail Kit [TAA]
- Replacement battery (1) is available
- 10kVA/10kW online double-conversion (pure sine wave output) UPS in a 6U rackmount form factor
- Ideal for protecting critical servers, storage, networking equipment, medical labs, and light industrial applications
- Includes a Network Management Card for remote monitoring and control
- SmartSlot allows for additional communication options
$12,200.00Low Price Guarantee - $2,594.69SKU: SMT3000RM2UCUS
APC SMT3000RM2UCUS Smart-UPS 3000VA LCD Rackmount 2U 120V [TAA]
- Replacement battery (1) is available
- 2880VA/2700W line interactive pure sine wave 2U rackmount UPS
- TAA certified product
- Automatic Voltage Regulation helps correct utility voltage
- Cloud-based remote power monitoring via SmartConnect Ethernet Port
$2,594.69Low Price Guarantee - $26,500.00SKU: E3SUPS40KFBS
APC E3SUPS40KFBS Easy UPS 3S 40 kVA 208V 3:3 UPS for Internal Batteries, Start-Up 5x8
- Easy UPS 3S is easy to install and start up
- Parallel up to 4 UPSs for capacity or redundancy
- Extended runtime options available
- EcoStruxure IT: Enables resilient, secure, and sustainable IT environments
$26,500.00Low Price Guarantee - $21,945.00SKU: E3SUPS20KFBS
APC E3SUPS20KFBS Easy UPS 3S 20 kVA 208V 3:3 UPS for Internal Batteries, Start-Up 5x8
- Easy UPS 3S is easy to install and start up
- Parallel up to 4 UPSs for capacity or redundancy
- Extended runtime options available
- EcoStruxure IT: Enables resilient, secure, and sustainable IT environments
$21,945.00Low Price Guarantee - $182.40SKU: BVK750M2
APC BVK750M2 Back UPS, 750VA/410W, Tower, 120V, 4x NEMA 5-15R Outlets, USB Type A + C Ports
- Compact size accommodates installation in a variety of environments
- Data line protection ensures complete protection of your equipment from surges
- LED display provides easy-to-read status of unit and utility power conditions
- AVR corrects voltage variations to provide reliable power
- 2 USB smart charging ports
$182.40Low Price Guarantee - $82.88SKU: BN450M
APC BN450M Back-UPS 450VA, 120V, 6 NEMA Outlets (2 Surge)
- Compact size accommodates installation in a variety of environments
- Data line protection ensures complete protection of your equipment from surges
- LED display provides easy-to-read status of unit and utility power conditions
- Audible alarms provide notification of changing utility power and UPS power conditions
- Wider outlet spacing for both high and low power devices
$82.88Low Price Guarantee - $3,771.59SKU: APDU11452ME
APC APDU11452ME NetShelter Rack PDU Advanced Generation 2, Metered, 3Phase
- Ideal for AI and other high density applications
- 4-in-1 combination outlet design acts as C13, C15, C19, and C21 in one outlet
- Live Swap Network Management Card 3
- Enhanced cybersecurity and EcoStruxureTM IT compatible
- 1 year free subscription to Secure NMC3 System
$3,771.59Low Price Guarantee - $4,775.00SKU: APDU11151SM
APC APDU11151SM NetShelter Rack PDU Advanced Generation 2, Switched Metered Outlet, 5.0kW
- Ideal for high-density applications
- Next-gen PDU speeds up IT deployments — one PDU for every type of device
- 4-in-1 combination outlet design acts as C13, C15, C19, and C21 in one outlet
- Enhanced cybersecurity and EcoStruxure™ IT compatible
- 1 year free subscription to Secure NMC3 System
$4,775.00Low Price Guarantee - $35,053.27SKU: PDPM288G6H
APC PDPM288G6H Modular Power Distribution Unit, 266kVA, 400A, 480V:415V Auto-Transformer, 72 Pole, 300mm
- Distributes up to 72 poles of power
- Includes auto-transformer
- Toolless addition of new circuits — factory-assembled and tested power distribution modules (PDMs) snap into place
- Power distribution modules include self-diagnostic capabilities
- Self-diagnostic power distribution modules include branch current monitoring and breaker position monitoring
$35,053.27Low Price Guarantee - $3,200.00SKU: AP8641US
APC AP8641US NetShelter Rack PDU, Metered-by-Outlet with Switching, 0U, 5.0kW 200V and 208V 30A
- Ideal for Colocation, large data centers or distributed IT sites
- Plan capacity and balance loads with +/- 3% metering accuracy (amps, volts, kW, kWh)
- Real-time remote monitoring of connected load through EcoStruxure IT and other platforms
- Stay on top by defining alarm thresholds in order to avoid overloaded circuits
- Zero U toolless installation
$3,200.00Low Price Guarantee - $63.95SKU: SLE-ULPS-R
Napco SLE-ULPS-R Power Supply Replacement for CFB-PS and -TF Models
- Rated 13.5VDC, 500mA Output
- 16.5VAC, 20VA
- Maximum charge current 200mA
$63.95Low Price Guarantee - $66.19SKU: TRF14LF
Napco TRF14LF Plug-in Transformer, 16.5V, 50VA
- Easy installation into standard wall outlets
- Meets safety standards for low-voltage applications
- Ideal for alarm panels, access control systems, and other low-voltage electronics
$66.19Low Price Guarantee - $57.50SKU: ISV2-SOLAR
Napco ISV2-SOLAR Solar Power Panel for ISV2-CAM-BAT
- Solar power panel for the ISV2-CAM-BAT battery-powered camera system; charges the ISV2-CAM-BAT camera battery using solar energy to extend the camera's operational runtime without manual battery removal and recharging
- Solar charging continuously tops up the camera battery during daylight hours, maintaining the battery's charge state and significantly extending the intervals between manual recharging cycles — in favorable sun exposure positions, may eliminate the need to ever manually recharge the battery
- Mounts near or adjacent to the ISV2-CAM-BAT camera using the included mounting hardware; positioned to maximize sun exposure at the installation location; connects to the camera via the included charging cable
$57.50Low Price Guarantee - $433.00SKU: GEMC-PS24V7A-R
Napco GEMC-PS24V7A-R Replacement 7A, 24V Power Supply for GEMC
- 24VDC output
- Maximum charge current 1.96A
- 7 ampere continuous supply current at 24VDC
- Built-in charger for sealed lead acid or gel type batteries
- Automatic switch over to stand-by battery when AC fails
$433.00Low Price Guarantee - $398.00SKU: GEMC-PS24V4A-R
Napco GEMC-PS24V4A-R Replacement 4A, 24V Power Supply for GEMC
- Converts current to the desired voltage and frequency to manage your power requirements
- Delivers 24V DC to ensure that your device is always ready to use
- Built-in charger for sealed lead acid or gel type batteries
- Automatic switch over to stand-by battery when AC fails
$398.00Low Price Guarantee - $236.55SKU: GEMC-12V2APS-R
Napco GEMC-12V2APS-R 12VDC Power Supply for Burg Bus, Remote Supervised
- 3-Unsupervised active-low 2A outputs activated by AC Fail, Battery TBL and Micro TBL
- One supervised GEMC-Remote Bus interface
- One normally-closed (N/C) housing tamper input, identified by trouble on dedicated integral EZM zone
- 4 status LEDs
- Power supply contains integral battery charger capable of charging up to 1 pair of 12AH/12V sealed lead acid batteries
$236.55Low Price Guarantee - was $353.00 Special Price $350.00SKU: GEMC-12V2APS-CF
Napco GEMC-12V2APS-CF 12VDC Power Supply for Fire Bus, Remote Supervised
- 3-Unsupervised active-low 2A outputs activated by AC Fail, Battery TBL and Micro TBL
- One supervised GEMC-Remote Bus interface
- One normally-closed (N/C) housing tamper input, identified by trouble on dedicated integral EZM zone
- 4 status LEDs
- Power supply contains integral battery charger capable of charging up to 1 pair of 12AH/12V sealed lead acid batteries
was $353.00 Special Price $350.00Low Price Guarantee - $421.38SKU: GEMC-NAC7S
Napco GEMC-NAC7S Remote 4-Output NAC Extender
- Streamlined integration into existing fire alarm systems, minimizing setup time and effort
- Designed to meet the demands of commercial and industrial environments, ensuring reliable fire signaling
- Expands the notification appliance circuit (NAC) capabilities remotely for extended coverage
- Integrates seamlessly with the Firewolf Series, renowned for advanced fire detection and alarm solutions
- Built with tamper-resistant features to prevent unauthorized interference with the NAC extender
$421.38Low Price Guarantee - $127.32SKU: ISV2-BAT
Napco ISV2-BAT Replacement battery for ISV2-CAM-BAT
- Replacement battery for ISV2-CAM-BAT systems
- Provides reliable backup power for continuous operation
- Supports uninterrupted security monitoring performance
- Designed for dependable and long-lasting use
- Easy to replace for simplified maintenance
$127.32Low Price Guarantee - $14.89SKU: MX879
Napco MX879 Battery for GEMTRANS2, Type DL123A, 3V, Lithium
- 3V lithium replacement battery for GEMTRANS2 transmitters
- DL123A battery type for reliable power performance
- Designed for long-lasting operation in wireless devices
- Helps maintain uninterrupted transmitter functionality
- Reliable power source for security system applications
$14.89Low Price Guarantee - $41.73SKU: PSOLAR
Napco PSOLAR Solar Panel Option for Recharging Cameras
- Keep Prima Wireless Cameras continuously charged & ready- No need to disconnect to recharge
- Uses Daylight Solar Energy (5W output) to recharge the integral battery while the camera is in use & mounted
- Versatile 360° Adjustable Mounting Bracket & 10’ charging cable, for optimal aiming
- IP67 Weatherproof Rating
- 6.61 x 7.20 x 0.67 (HWD)
$41.73Low Price Guarantee - $30.02SKU: TRF12LF
Napco TRF12LF Plug-In Transformer, 16.5V, 20V A
- Output Voltage: 16.5VDC, suitable for powering control panels and related devices
- Power Rating: 20VA, providing sufficient capacity for standard system requirements
- Application: Designed for use with Napco hybrid control panels, ensuring compatibility and optimal performance
- Construction: Durable design for long-term reliability in various installation environments
$30.02Low Price Guarantee - Call For Price: 800-955-5201SKU: SXA600
Speco SXA600 600W Solar Kit with Lithium Battery Compatibility
- 600W solar panel kit with lithium battery-compatible MPPT charge controller and universal mounting hardware; optimized for use with LiFePO4 and other lithium battery chemistries in remote surveillance deployments
- Universal mount hardware: includes all mounting brackets and hardware needed to install the solar panels at the deployment site — on poles, structures, or ground frames
- Pair with a compatible lithium battery, PoE switch, and IP camera to complete the remote off-grid surveillance system; for a fully integrated enclosure with charge controller included
- $69.99SKU: 562256
Intellinet 562256 2.5G PoE++ Injector
- Power over Ethernet with output up to 60 watts
- High-speed 2.5GBASE-T RJ45 Ethernet port, IEEE 802.3bz compliant
- Supports 10/100/1000/2500 Mbps data rates
- Compatible with IEEE 802.3bt/at/af-compliant powered devices (PD) such as network cameras, wireless access points, VoIP phones and more
- Ideal for power-hungry IoT devices like motorized IP cameras, thin clients, PoE lighting and more
$69.99Low Price Guarantee$112.99SKU: 509633Intellinet 509633 Industrial 10G PoE++ Splitter 90 W
- Splits an IEEE 802.3bt PoE++ connection into power and Gigabit Ethernet for non-PoE devices
- Selectable DC outputs with 12, 16, or 24 V (2.3 A) or 48 V (1.25 A) via 4-pin terminal block
- One RJ45 input port up to 90 W from an IEEE 802.3bt/at/af-compliant PoE injector or PoE switch (PSE)
- Ultra-fast 10GBASE-T RJ45 Ethernet ports, IEEE 802.3bz compliant
- IP50 slim-type metal housing to withstand harsh industrial conditions
$112.99Low Price Guarantee$87.99SKU: 509626Intellinet 509626 Industrial Gigabit PoE++ Splitter 90 W
- Splits an IEEE 802.3bt PoE++ connection into power and Gigabit Ethernet for non-PoE devices
- Selectable DC outputs with 12, 16, or 24 V (2.3 A) or 48 V (1.25 A) via 4-pin terminal block
- One RJ45 input port up to 90 W from an IEEE 802.3bt/at/af-compliant PoE injector or PoE switch (PSE)
- One RJ45 output port with 10/100/1000 data rates
- IP50 slim-type metal housing to withstand harsh industrial conditions
$87.99Low Price Guarantee$188.00SKU: HDMI-SP8-3ENS HDMI-SP8-3 4k HDMI 1 to 8 Splitter, 4K@30Hz
- Divide the high definition video source into eight high definition video signals
- High definition video signal resolution up to 3840*2160@30 Hz
- Compliance with HDMI 1.4
- Support video format 8/10/12bit deep color
- Support audio format DTS-HD/Dolby-TrueHD/DTS/Dolby-AC3/DSD
$188.00Low Price Guarantee$258.00SKU: UPS-K1200ENS UPS-K1200 Uninterruptible Power Supply, 1200VA/720W, 2x12V 7AH Battery
- 1200VA / 720W Power Capacity: Delivers reliable backup power for computers, network devices, and other essential electronics during outages
- Dual 12V 7AH Batteries: Provides extended runtime and stable power supply with two sealed lead-acid batteries for dependable performance
- Uninterruptible Power Supply: Ensures seamless transition to battery power during mains interruptions, preventing data loss and hardware damage
- Surge Protection & Voltage Regulation: Protects connected devices from voltage spikes, surges, and unstable power conditions
- Compact and Durable Design: Space-efficient unit suitable for desktop or rack mounting in office and home environments
$258.00Low Price Guarantee$838.00SKU: UPS-CR1KENS UPS-CR1K Uninterruptible Power Supply, 1KVA/800W, Rack Mounting
- Rack-mount format: integrates the UPS directly into the security equipment rack alongside the NVR and PoE switch — eliminating the floor-standing UPS tower and its associated cabling from the equipment room floor
- 1KVA/800W capacity: sufficient for a typical small-to-medium security rack including a 16-channel NVR (40W), a PoE switch (100W), and additional accessories — providing approximately 10–20 minutes of battery backup at full load
- AVR corrects undervoltage and overvoltage without battery switching, extending battery service life and protecting sensitive NVR and switch electronics from power quality issues
$838.00Low Price Guarantee$550.00SKU: UPS-1K9AENS UPS-1K9A Uninterruptible Power Supply, 1000VA/1000W 3 Outlets
- 1000VA/1000W line-interactive UPS; unity power factor (1.0 PF); 3 AC outlet outputs; AVR (Automatic Voltage Regulation); surge protection; sealed lead-acid battery
- Unity power factor: 1000VA = 1000W at 1.0 PF — the full capacity is available as real power, unlike 0.9 or 0.8 PF UPS systems where the same VA rating delivers only 900W or 800W; correct for NVRs, servers, and active PFC equipment loads
- 3 AC outlets: powers NVR, PoE switch, and router/modem simultaneously from a single UPS; AVR corrects voltage sags and surges without switching to battery, extending battery life and protecting equipment from sub-outage voltage events
$550.00Low Price Guarantee$1,074.00SKU: SGA-AIR2000KENS SGA-AIR2000K Surveillance Power Enclosure, 2 110V 5A Output Socket
- External can be installed PTZ IPC, DOME IPC Bullet IPC And IP Speaker
- The interior can be placed NVR, 4G Router, POE switch…
- The AC power supply input line is configured(MAX 110V 1.5KW)
- Built-in 2Pcs power output socket (Each socket has a maximum load of 110V 550W)
- 5 port DC power output (Total output power of 255W)
$1,074.00Low Price Guarantee$934.00SKU: SGA-AIR1000KENS SGA-AIR1000K Surveillance Power Enclosure, 3 110V 5A Output Socket
- Quick and Easy Installation for Dome, Bullet, PTZ, and IP Speaker
- The Interior of The Box Can Accommodate An NVR, 4G Router, and PoE Switch
- The AC Power Supply Input Line Is Configured At MAX 110V 16A
- Built-In 3Pcs Power Output Socket
- Built-in 6KV Lightning Protection Device
$934.00Low Price Guarantee$310.00SKU: CP360W-POE8P-BENS CP360W-POE8P-B Access Control, CCTV, Battery Charger All In One Power Box
- 8 × PoE ports power IP cameras and network devices simultaneously over Cat5/6; 8 × 12V DC outputs power door locks, electric strikes, magnetic locks, alarm panels, and other 12V DC access control hardware
- Integrated battery charger: connects to a 12V backup battery (sold separately) to maintain battery charge for uninterrupted operation during power outages — providing UPS-like battery backup for all connected devices without a separate UPS unit
- Single-box consolidation eliminates wiring complexity — all access control and CCTV power connections terminate to one location, simplifying installation, troubleshooting, and service; lockable steel box protects power circuitry from unauthorized access
$310.00Low Price Guarantee$76.00SKU: CP12-5A-EGENS CP12-5A-EG Access Control Power Box, 5A, DC12-15V Adjustable Output
- Support 64/128CH 16MP/12MP/8MP/6MP/5MP/4MP/3MP/1080P/1280x1024/960P/720P/960H/D1/CIF IP input
- H.265S/H.265+/H.265/H.264 coding
- Intuitive and user-friendly Graphic User Interface ( GUI ), Windows style operation by mouse
- Multi-mode recording: manual / timed / motion / sensor/ POS / AI recording
- Playback: 16 CH simultaneous playback
$76.00Low Price Guarantee$580.00SKU: SGP-S300W-P-V2ENS SGP-S300W-P-V2 Sun Guardian Outdoor Power Panel Pro, 2 Pack
- 2-pack of 150W monocrystalline solar panels; total output: 300W; operating voltage: 36V; designed as the solar generation component for the ENS Sun Guardian SGP-V2 outdoor enclosure system
- Sun Guardian Outdoor Power Panel Pro: 150W × 2 panels, 36V configuration; the solar generation component designed to pair with the SGP-V2 outdoor enclosure and SGP-MAX3000P-V2 power system
- Monocrystalline silicon cells provide higher conversion efficiency per square meter than polycrystalline alternatives — maximizing energy harvest from the panel area available on a Sun Guardian pole or structure mount
- 36V panel configuration matches the SGP-V2 enclosure's MPPT charge controller input voltage specification
$580.00Low Price Guarantee$314.00SKU: SGP-S300W-M-V2ENS SGP-S300W-M-V2 Sun Guardian Outdoor Power Panel S300W (V2) Mount and Mounting Accessories
- Solar Panel Mounting Bracket
- Constructed from high-strength hot-dip galvanized steel
- Compatible with dual 150W solar panels (total 300W)
- Includes 2 U-shaped clamps
- Rust-resistant with protective spray coating
$314.00Low Price Guarantee$4,119.00SKU: SGP-MAX3000P-V2ENS SGP-MAX3000P-V2 Sun Guardian Outdoor Enclosure Pro
- Outdoor Enclosure Pro
- 25.2 V 2.5 kWh Battery
- MPPT
- MPPT gateway included (PoE switch not included)
- 12 V 48 V output
$4,119.00Low Price Guarantee$1,669.00SKU: SGP-2800ENS SGP-2800 Sun Guardian Outdoor Enclosure Battery For SGP-V2, 22.2V, 2800Wh
- Lithium battery module; voltage: 22.2V; capacity: 2800Wh (2.8 kWh); designed for the ENS Sun Guardian SGP-V2 outdoor enclosure solar system
- 2800Wh of battery capacity provides substantial energy storage for extended autonomous operation
- The SGP-2800 is the battery module for the SGP-V2 platform
- 22.2V lithium cell configuration matches the SGP-V2 enclosure's charge controller and power management system; do not install in enclosures with different voltage battery architectures
$1,669.00Low Price Guarantee$4,798.00SKU: SG-GEN-MODENS SG-GEN-MOD Generator Module for SG-008
- Generator integration module for the ENS SG-008 Sun Guardian solar surveillance trailer; provides the power interface and control circuit for connecting a generator as supplemental or backup charging power
- Generator charging capability fills the solar energy gap during extended cloudy periods, nighttime heavy loads, or emergency situations where the SG-008's battery is depleted faster than solar can replenish it
- Extends the SG-008's operational availability to 24/7 regardless of solar conditions when used with a compatible generator — the correct specification for long-term deployments at sites with variable or low solar resource
$4,798.00Low Price Guarantee$1,150.00SKU: SG-BATTERYENS SG-BATTERY Sun Guardian Solar Trailer Max Battery, 200Ah DC12V
- Deep-cycle battery; 12V DC; 200Ah capacity; designed for ENS Sun Guardian solar surveillance trailer systems with 12V DC electrical architecture
- 200Ah capacity at 12V provides substantial energy reserve for off-grid surveillance equipment — sufficient to power typical IP camera and network equipment loads through multiple nights between solar charge cycles, depending on total system draw
- Deep-cycle design
- Replacement battery for Sun Guardian solar trailer systems using 12V DC battery banks
$1,150.00Low Price Guarantee$3,999.00SKU: SG-8000ENS SG-8000 Battery for SG-008, 314Ah, 25.6V
- LiFePO4 (lithium iron phosphate) battery; voltage: 25.6V; capacity: 314Ah; approximately 8 kWh of energy storage; OEM replacement battery for the ENS SG-008 Sun Guardian solar surveillance trailer
- LiFePO4 chemistry: superior to lead-acid in energy density, cycle life (2,000–4,000+ cycles vs. 200–500 for lead-acid), depth of discharge (up to 80% vs. 50% for lead-acid), and operating temperature range — the correct chemistry for outdoor solar surveillance trailer applications
- 25.6V (8S LiFePO4) configuration matches the SG-008's electrical system design
$3,999.00Low Price Guarantee$45,198.00SKU: SG-009ENS SG-009 Sun Guardian 009 Solar Trailer Max, 3 Panel
- Quick and Easy Installation
- Experience Streaming Quality of Up to 4K Resolution
- SD and Local Storage
- No Requirement for External Wiring or Link-ups
- 4G Cellular Connection
$45,198.00Low Price Guarantee$33,999.00SKU: SG-008ENS SG-008 Sun Guardian 008 Solar Trailer Max
- 2-panel design using high-efficiency 440 W monocrystalline silicon panels
- Optimized for maximum performance even in low-sunlight areas
$33,999.00Low Price Guarantee$80.00SKU: POE-INJECT06ENS POE-INJECT06 1 Channel POE Injector, 2.5Gbps, White
- 1-channel PoE injector; 2.5 Gbps (2500BASE-T) data pass-through; IEEE 802.3at/bt PoE output; AC power input
- White finish: the standard color for ceiling-mounted and wall-mounted access point installations where a white injector will be less conspicuous in finished spaces
- Midspan injector: connects between a non-PoE switch port and the downstream PoE device, adding IEEE 802.3at/bt PoE power without replacing the switch
- Plug-and-play; auto-negotiates PoE class and link speed with the connected device
$80.00Low Price Guarantee$56.00SKU: POE-INJECT05ENS POE-INJECT05 1 Channel PoE Injector, 10/100 Mbps
- 1-channel PoE injector; 10/100 Mbps (Fast Ethernet) data pass-through; IEEE 802.3af PoE (15.4W) output; AC power input from wall outlet
- Midspan injector function: connects between a non-PoE switch port and the downstream PoE device — the injector adds PoE power to the Ethernet cable without affecting data transmission
- 10/100 Mbps (Fast Ethernet) data rate — for Gigabit or 2.5Gbps data pass-through, see the POE-INJECT06; the 10/100 Mbps limitation makes this appropriate for standard IP cameras that do not require Gigabit throughput
- Compact desktop design; plug-and-play; no configuration required; auto-negotiates PoE class with the connected device
$56.00Low Price Guarantee$178.00SKU: CP1218-30A-UENS CP1218-30A-U 12VDC, 18-Channel Power Supply, 30A, PTC Fuse, UL Certified
- 12V DC, 18-channel camera power supply; AC 100–240V input; 50/60Hz; DC 12V ±5% output; 30A total output current; 18 individually PTC fuse-protected channels; UL certified
- Provides greater headroom for high-current camera installations — 8MP cameras with long-range IR, cameras with integral heaters, PTZ cameras, and other accessories that draw more than the average camera's 300–500mA
- Universal AC 100–240V input; 18 output channels in a lockable metal enclosure; suitable for up to 18 cameras at approximately 1.67A per channel average at full 30A load
- UL certified
$178.00Low Price Guarantee$160.00SKU: CP1218-20A-UENS CP1218-20A-U 12VDC, 18-Channel Power Supply, 20A, PTC Fuse, UL Certified
- Input Voltage : AC 100-240V
- Input Voltage Frequency : 50/60Hz
- Output Voltage : DC 12V +/-5%
- Total Output Current : 20A
- Total Outputs : 18 Channel
$160.00Low Price Guarantee$2,755.00SKU: HV-PWR1200V2-10Hanwha Vision HV-PWR1200V2-10 Secondary Hot-Swap Power Supply
- 24 ports, with 4 uplinks
- Swappable PSU
- 1480W PoE+/PoE++ power budget with x2 PWR1200V2
- Fully managed
- AW+ OS (CLI, GUI and NetCONF/RESTCONF)
$2,755.00Low Price Guarantee$725.00SKU: HV-IE048-480-20Hanwha Vision HV-IE048-480-20 480W 48VDC Industrial AC/DC Power Supply, DIN Rail Mount
- 480W industrial AC/DC power supply
- Stable 48VDC output for industrial systems
- DIN rail mount design for quick installation
- Ideal for industrial networking and surveillance environments
- Reliable and consistent power delivery
$725.00Low Price Guarantee$552.99SKU: HV-IE048-240-20Hanwha Vision HV-IE048-240-20 240W 48VDC Industrial AC/DC Power Supply, DIN Rail Mount
- 240W industrial AC/DC power supply
- Stable 48VDC output for industrial applications
- DIN rail mount design for simplified installation
- Suitable for industrial networking and surveillance systems
- Reliable power delivery for continuous operation
$552.99Low Price Guarantee$8,183.00SKU: SXP800Speco SXP800 800W Solar-Panel with Enclosure, Charge Controller & PoE Switch
- 800W solar panel array with weatherproof lockable enclosure; integrated MPPT charge controller and PoE switch for powering and connecting IP cameras; no cellular router included
- PoE switch: delivers both power and network data to connected IP cameras over Cat5/6 — the enclosure provides a single integration point for camera PoE connections at the remote site
- 800W panel capacity supports multi-camera deployments and high PoE power budgets; MPPT controller maximizes battery charge efficiency from the solar array
$8,183.00Low Price Guarantee$9,618.00SKU: SXC800Speco SXC800 800W Solar-Panel with Enclosure, Charge Controller, PoE Switch & Router
- 4G cellular router (AT&T, T-Mobile, and Verizon compatible) provides remote network access for camera video, remote management, and cloud recording without any wired network infrastructure at the deployment site
- Integrated PoE switch delivers power and data to connected IP cameras over standard Cat5/6 cable — the only wiring required between the enclosure and each camera
- 800W solar panel capacity provides maximum energy harvest for multi-camera systems with continuous recording and cellular data transmission requirements
- SIM card not included
$9,618.00Low Price Guarantee$6,657.92SKU: SXA800Speco SXA800 800W Solar Kit with Lithium Battery Compatibility
- 800W solar panel kit with lithium battery-compatible MPPT charge controller and universal mounting hardware; maximum panel capacity in the SXA lithium-compatible kit line
- Lithium-compatible MPPT charge controller with correct lithium charging profiles prevents premature battery degradation — pair with a high-capacity LiFePO4 battery to maximize system energy storage and autonomy
- Universal mounting hardware included for pole, structure, or ground-frame panel installation; cameras, battery, PoE switch, and network equipment not included
$6,657.92Low Price Guarantee$7,896.00SKU: SX800Speco SX800 800W Solar-Panel with Enclosure & Charge Controller
- 800W solar panel array with weatherproof lockable enclosure and MPPT charge controller; maximum panel capacity in the Speco SX enclosure-integrated solar line
- MPPT charge controller maximizes conversion efficiency from panel to battery; lockable weatherproof enclosure protects all components from weather and unauthorized access
- Integration with Speco IP cameras, PoE switch, and cellular router creates a fully self-contained remote surveillance system; consult SX800 documentation for maximum PoE device count and power budget
- For higher-capacity configurations with PoE switch and cellular router already integrated
$7,896.00Low Price Guarantee$6,157.97SKU: SX600Speco SX600 600W Solar-Panel with Enclosure & Charge Controller
- 600W solar panel array with weatherproof lockable enclosure and MPPT charge controller; designed for remote IP camera surveillance deployments without grid power access
- 600W panel capacity: provides greater energy harvest than the 400W SX400, supporting higher camera power draws, more PoE devices, or improved battery charge recovery in lower-irradiance environments or adverse weather conditions
- Designed for integration with Speco IP cameras and network connectivity components (cellular router or wired LAN) to create a complete remote surveillance system
$6,157.97Low Price Guarantee$4,810.00SKU: SX400Speco SX400 400W Solar-Panel with Enclosure & Charge Controller
- 400W solar array with weatherproof enclosure and MPPT charge controller for powering remote IP surveillance camera installations; designed for construction sites, wildlife habitats, remote facilities, and other locations without grid power access
- Integrated MPPT (Maximum Power Point Tracking) charge controller: automatically optimizes the solar panel's power output relative to battery state and ambient conditions, maximizing charge efficiency compared to standard PWM controllers
- Weatherproof lockable enclosure: NEMA-rated steel or aluminum housing protects the battery, controller, and power distribution components from weather, tampering, and vandalism at the remote deployment site
$4,810.00Low Price Guaranteewas $17,589.00 Special Price $7,677.00SKU: SXP600Speco SXP600 (6) 100W Solar Powered Panel with Mounting Hardware
- Solar panel and mounting hardware included
- Weather-proof aluminum enclosure and mounting hardware included
- Lockable wing-knob; locks with pad lock (pad lock not included)
- Hardwired PoE switch, converters, charging equipment, charging equipment, and are self-contained and safeguarded against environmental factors and tampering
- Battery capacity of up to 4 x 100 Ah batteries
was $17,589.00 Special Price $7,677.00Low Price Guarantee$5,152.00SKU: SXP400Speco SXP400 (2) 200W Solar Powered Panel with Mounting Hardware
- Protects all four pairs, RJ45 connections
- Solar panel and mounting hardware included
- Weather-proof aluminum enclosure and mounting hardware included
- Lockable wing-knob; locks with pad lock (pad lock not included)
- Hardwired PoE switch, converters, charging equipment, charging equipment, and are self-contained and safeguarded against environmental factors and tampering
$5,152.00Low Price Guaranteewas $616.00 Special Price $399.00was $616.00 Special Price $399.00Low Price Guaranteewas $539.00 Special Price $372.00SKU: SR1000RMLCDMinuteman SR1000RMLCD Shallow Rack Series Line-Interactive UPS (1000VA/600W)
- 1000VA / 600W power capacity
- Line-interactive topology with AVR (Automatic Voltage Regulation)
- Rack, tower, and wall-mount installation flexibility
- LCD display for real-time status monitoring
- Multiple outlets with surge and battery backup protection
was $539.00 Special Price $372.00Low Price Guarantee$667.00SKU: RPM154N1LCD-15PMinuteman RPM154N1LCD-15P IP-based Switched PDU 4-outlet 120V 15A IPv6
- 4 switched NEMA outlets for individual device control
- 120V, 15A power capacity
- IP-based remote management via web interface, SNMP, and network access
- Supports IPv4 and IPv6
- LCD display for real-time power monitoring
$667.00Low Price Guarantee$37.00SKU: MM-WALL-BKTMinuteman MM-WALL-BKT Wall Mount Bracket for SR, PRO-RT2U, EXR, EC-RTXL & END Series
- Compatible with SR, PRO-RT2U, EXR, EC-RTXL, and END series UPS systems
- Wall-mount design for space-saving installation
- Provides secure and stable mounting
- Durable construction for reliable support
- Ideal for server rooms and IT environments
$37.00Low Price Guarantee$61.10SKU: DTK-MRJ45XWPDitek DTK-MRJ45XWP 4 Pair, 14V, RJ45 Input/Output Modular Surge Protector, UL 497B with Patch Cord
- Protects all four pairs, RJ45 connections
- Multi-stage hybrid design utilizing TVS Diode and GDT technology
- “WP” suffix indicates product includes a 3’ RJ45 Male to Male patch cable
$61.10Low Price Guarantee$61.10SKU: DTK-MRJ45XDitek DTK-MRJ45X 4 Pair, 14V, RJ45 Input/Output Modular Surge Protector, UL 497B
- Protects all four pairs, RJ45 connections
- Multi-stage hybrid design utilizing TVS Diode and GDT technology
$61.10Low Price Guarantee$61.10SKU: DTK-MRJ45RUVDitek DTK-MRJ45RUV 4 Pair, 130V, RJ45 Input/Output Modular Surge Protector, UL 497B
- Protects all four pairs, RJ45 connections
- Multi-stage hybrid design utilizing TVS Diode and GDT technology
$61.10Low Price Guarantee$61.10SKU: DTK-MRJ45OPXDitek DTK-MRJ45OPX 4 Pair, 50V, RJ45 Input/Output Modular Surge Protector, UL 497B
- Multi-stage hybrid design utilizing TVS Diode and GDT technology
- RJ45 female In/Out
$61.10Low Price Guarantee$93.00SKU: DTK-MRJ45LVWPDitek DTK-MRJ45LVWP 4 Pair, 30V, RJ45 Input/Output Modular Surge Protector, UL 497B with Patch Cord
- Multi-stage hybrid design utilizing TVS Diode and GDT technology
- RJ45 female In/Out
- “WP” suffix indicates product includes a 3’ RJ45 Male to Male patch cable
$93.00Low Price Guarantee$61.10SKU: DTK-MRJ45LVDitek DTK-MRJ45LV 4 Pair, 30V, RJ45 Input/Output Modular Surge Protector, UL 497B
- Multi-stage hybrid design utilizing TVS Diode and GDT technology
- RJ45 female In/Out
$61.10Low Price Guarantee$42.90SKU: DTK-MRJ31XWPDitek DTK-MRJ31XWP Alarm Panel Dialer Surge Protector
- Single pair RJ31X dialer circuit protection with patch cord
- Universal modular jack with external grounding screw
- Multi-stage hybrid design utilizing TVS Diode and GDT technology
$42.90Low Price Guarantee$94.98SKU: DTK-120-240BK1Ditek DTK-120-240BK1 120/240 VAC Circuit Breaker Surge Protective Device
- Installs directly on to load center bus bars
- Thermally-protected MOV technology
- Audible alarm with silence feature
- Diagnostic LED provides visual indication of system power and SPD function
$94.98Low Price Guarantee$611.00SKU: D150X-4803DDitek D150X-4803D 150kA Surge Protective Device, 480 VAC 3 Phase Delta
- Audible alarm and Form C dry contacts for remote monitoring
- Diagnostic LEDs for each phase provide indication of system power and SPD function
- All models are UL96A & NFPA 780 compliant
- UL Type 4X enclosure
- Available in voltage configurations
$611.00Low Price Guarantee$611.00SKU: D150X-277-4803YDitek D150X-277-4803Y 150kA Surge Protective Device, 277/480 VAC 3 Phase Wye
- Audible alarm and Form C dry contacts for remote monitoring
- Diagnostic LEDs for each phase provide indication of system power and SPD function
- All models are UL96A & NFPA 780 compliant
- UL Type 4X enclosure
- Available in voltage configurations
$611.00Low Price Guarantee$602.29SKU: D150X-2403DDitek D150X-2403D 150kA Surge Protective Device, 240 VAC 3 Phase Delta
- Audible alarm and Form C dry contacts for remote monitoring
- Diagnostic LEDs for each phase provide indication of system power and SPD function
- All models are UL96A & NFPA 780 compliant
- UL Type 4X enclosure
- Available in voltage configurations
$602.29Low Price Guarantee$611.00SKU: D150X-120-240HLDitek D150X-120-240HL 150kA Surge Protective Device, 120/240 VAC High Leg Delta
- Audible alarm and Form C dry contacts for remote monitoring
- Diagnostic LEDs for each phase provide indication of system power and SPD function
- All models are UL96A & NFPA 780 compliant
- UL Type 4X enclosure
- Available in voltage configurations
$611.00Low Price Guarantee$611.00SKU: D150X-120-2401Ditek D150X-120-2401 150kA Surge Protective Device, 120/240 VAC Split Phase
- Audible alarm and Form C dry contacts for remote monitoring
- Diagnostic LEDs for each phase provide indication of system power and SPD function
- All models are UL96A & NFPA 780 compliant
- UL Type 4X enclosure
- Available in voltage configurations
$611.00Low Price Guarantee$611.00SKU: D150X-120-2083YDitek D150X-120-2083Y 150kA Surge Protective Device, 120/208 VAC 3 Phase Wye
- 150,000 Amp surge current rating per phase ensures long service life
- Discrete, all-mode surge protection design maximizes performance
- Diagnostic LEDs indicate system power and SPD function
- Audible Alarm and Dry contacts for remote monitoring of surge protection status
$611.00Low Price Guarantee$150.00SKU: POE47TSELK POE47TS Ethernet & PoE Adapter for ELK-7TS Touchscreen
- RJ45 port and pre-wired touchscreen connector for easy installation
- Power and Network LEDs indicators
- 15” cable to touchscreen
$150.00Low Price Guarantee$111.10SKU: DCU120050Alpha DCU120050 18VDC Window Intercom Power Supply
- Output: 18VDC for powering compatible window intercom systems
- Accepts 110VAC or 230VAC input at either 50Hz or 60Hz for broad compatibility
- Plug-in design for simple, tool-free installation
- Continuous-duty rated for reliable, around-the-clock operation
- Designed for use with Alpha SC-100 series and similar window/partition intercom systems
$111.10Low Price Guarantee$101.12SKU: 5001-099DoorKing 5001-099 Transformer
- Genuine OEM replacement transformer for DoorKing gate operators and/or access control systems; provides the correct AC voltage and VA rating for the specific operator or system in which it is installed
- OEM transformer replacement ensures correct primary voltage, secondary voltage, VA rating, mounting form factor, and terminal configuration — all of which are system-specific and not interchangeable with general-purpose transformers
- Transformer failure typically manifests as loss of control power to the operator circuit board: the gate becomes unresponsive to all inputs while the motor circuit may remain intact
$101.12Low Price Guarantee$954.00SKU: 4001-088DoorKing 4001-088 Transformer 575/460/230/208-115V
- Step-down transformer with four primary voltage taps: 575 VAC, 460 VAC, 230 VAC, and 208 VAC; secondary output: 115 VAC
- Enables DoorKing gate operators that nominally require 115 VAC to be powered from industrial three-phase or high-voltage commercial supply voltages — the correct primary tap is selected at installation to match the available supply voltage
- For 9000, 6500, 6300, 9150, and 1600 series operators, a step-down transformer allows input AC voltage to be altered from 115 VAC to 208, 230, 460, or 575 VAC input
$954.00Low Price Guarantee$82.95SKU: VZ-PSU-4N-24ViewZ VZ-PSU-4N-24 AC 120V to DC 24V Adapter for 43" Monitors
- Fully testified for 43″ CMP
- DC 24V / 4.2A Output
- AC 100~240V / 50 or 60Hz / 3.0A Input
- Green Power On LED
- Energy efficiency rating: VI
$82.95Low Price Guarantee$52.00SKU: VZ-PSU-3P-24ViewZ VZ-PSU-3P-24 AC 120V to DC 24V Adapter for 27" & 32" IP PVM Monitors
- Fully testified for 27″ & 32″ IP PVM – VZ-PVM-I3B3N / VZ-PVM-I3W3N/ VZ-PVM-I4B3N / VZ-PVM-I4W3N
- DC 24V / 3.0A output
- AC 100~240V / 50 or 60Hz / 1.5A Max
- Green Power On LED
- Energy efficiency rating: VI
$52.00Low Price Guarantee$45.50SKU: VZ-PSU-3N-24ViewZ VZ-PSU-3N-24 AC 120V to DC 24V Adapter for 32" Monitors
- Fully testified for 32″ CMP
- DC 24V / 2.7A output
- AC 100~240V / 50 or 60Hz / 1.5A Max
- Green Power On LED
- Energy efficiency rating: VI
$45.50Low Price Guarantee$35.95SKU: VZ-PSU-2P-24ViewZ VZ-PSU-2P-24 AC 120V to DC 24V Adapter for 23" IP PVM Monitors
- Fully testified for 23″ IP PVM – VZ-PVM-I2B3N/VZ-PVM-I2W3N
- DC 24V / 2.7A output
- AC 100~240V / 50 or 60Hz / 1.5A Max
- Green Power On LED
- Energy efficiency rating: VI
$35.95Low Price Guarantee$33.50SKU: VZ-PSU-2N-24-12ViewZ VZ-PSU-2N-24-12 AC/DC24V Power Converter + Power Cord for VZ-8PVM
- AC 120V to DC 24V power converter with power cord; specifically designed for the ViewZ VZ-8PVM (8" Public View Monitor) series; includes 12-foot power cord for extended reach to the power outlet
- 24V DC output: the correct supply voltage for the VZ-8PVM series — do not substitute 12V or other DC voltage adapters, which will result in insufficient power or potential damage to the monitor
- The 12-foot cord length (approximately 3.6 meters) accommodates installations where the nearest power outlet is not directly adjacent to the monitor mounting location — a common requirement in retail PVM installations on counters, pillars, and wall positions
$33.50Low Price Guarantee$36.40SKU: VZ-PSU-2N-24ViewZ VZ-PSU-2N-24 AC 120V to DC 24V Adapter for 19 to 27" Monitors
- Fully testified for 19″, 22″, 24″ & 27″ CMP
- DC 24V / 2A output
- AC 100~240V / 50 or 60Hz / 1.5A Max input
- Green Power On LED
- Energy efficiency rating: VI
$36.40Low Price Guarantee$31.05SKU: VZ-PSU2NViewZ VZ-PSU2N AC 120V to DC 12V Adapter for 9.7 to 24" Monitors
- Fully testified for 101 RTC, 17″ & 19″ RTN, 19″ & 22″ & 24″ CMP / CME / CMX, 21.5″ LED-S
- DC 12V / 3A output
- AC 100~240V / 50 or 60Hz / 1.5A input
- Green Power On LED
- Energy Efficiency Rating: V
$31.05Low Price Guarantee$44.20SKU: VZ-CSE1202ViewZ VZ-CSE1202 25W PoE Injector for VZ-PVM-I1W4N / VZ-PVM-I1B4N
- DC 50V / 25W output
- AC 110~220V / 50 or 60Hz
- Single-port gigabit PoE midspan
- Supports 10/100/1000 Base-T applications
- Internal AC/DC converter
$44.20Low Price Guarantee
![APC SRT6KRMXLT-A Smart-UPS On-Line, 6kVA/6kW, Rackmount 4U, 208V Extended Runtime with Rail Kit [TAA]](https://www.surveillance-video.com/media/catalog/product/cache/c5b0e6136a6dd7f7d91d8b889ed40f35/image/199206636d/apc-srt6krmxlt-a-smart-ups-on-line-6kva-6kw-rackmount-4u-208v-extended-runtime-with-rail-kit-taa-srt6krmxlt-a.jpg)
![APC SRT5KRMXLT-A Smart-UPS On-Line, 5.4kVA, Rackmount 3U, 208V Extended Runtime with Rail Kit [TAA]](https://www.surveillance-video.com/media/catalog/product/cache/c5b0e6136a6dd7f7d91d8b889ed40f35/image/199205b1e7/apc-srt5krmxlt-a-smart-ups-on-line-5-4kva-rackmount-3u-208v-extended-runtime-with-rail-kit-taa-srt5krmxlt-a.jpg)
![APC SRT1500RMXLA-NCUS Smart-UPS SRT 1500VA LCD Rackmount 120V with Network Card [TAA]](https://www.surveillance-video.com/media/catalog/product/cache/c5b0e6136a6dd7f7d91d8b889ed40f35/image/19920482ed/apc-srt1500rmxla-ncus-smart-ups-srt-1500va-lcd-rackmount-120v-with-network-card-taa-srt1500rmxla-ncus.jpg)
![APC SRT10KRMXLT-A Smart-UPS On-Line, 10kVA/10kW, Rackmount 6U, 208V with Rail Kit [TAA]](https://www.surveillance-video.com/media/catalog/product/cache/c5b0e6136a6dd7f7d91d8b889ed40f35/image/1992039f8a/apc-srt10krmxlt-a-smart-ups-on-line-10kva-10kw-rackmount-6u-208v-with-rail-kit-taa-srt10krmxlt-a.jpg)
![APC SMT3000RM2UCUS Smart-UPS 3000VA LCD Rackmount 2U 120V [TAA]](https://www.surveillance-video.com/media/catalog/product/cache/c5b0e6136a6dd7f7d91d8b889ed40f35/image/199202e5bb/apc-smt3000rm2ucus-smart-ups-3000va-lcd-rackmount-2u-120v-taa-smt3000rm2ucus.jpg)
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.
Filter
Shopping Options
