Fiber Receiver
- $297.19SKU: SFP-10G-SR=
Cisco SFP-10G-SR= 10GBASE-SR SFP+ Transceiver Module
- Industry’s smallest 10G form factor for greatest density per chassis
- Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing)
- Supports "pay-as-you-populate" model for investment protection and ease of technology migration
- Digital optical monitoring capability for strong diagnostic capabilities
- Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link
$297.19Low Price Guarantee - $220.80SKU: GLC-LH-SMD=
Cisco GLC-LH-SMD= 1000BASE-LX/LH SFP (Mini-GBIC) Transceiver Module
- GBIC transceiver module
- GigE
- 1000Base-LX
- 1000Base-LH
- LC/PC single-mode
$220.80Low Price Guarantee - $112.00SKU: 87-000019911
Kramer 87-000019911 10Gb Multimode Fiber Duplex SFP+ Module
- Certified SFP+ optical module
- 2–strand LC–connected single–mode fiber
- Ultra–reach — Up to 33km (20.5 miles)
- 2 single–mode LC strands
- Data rate — 10.2Gbps
$112.00Low Price Guarantee - $416.00SKU: 50-00010490
Kramer 50-00010490 HDMI Ultra-Reach Receiver with RS-232 & Loop, Over Any 2-Wire Cable (576)
- High Performance Extender — Reliable HDMI signal extension over distances of up to 600m (2000ft)
- Audio De–embedding — The transmitted digital audio signal is extracted from the AV signal and available in both digital (S/PDIF) and analog format, as well as being available on the HDMI output
- Convenient Connector Options — Connect via one of 3 options: Terminal block (for common 2–wire connection), RJ–45 (CAT) (for typical long–distance applications), or VGA (to enable using HDMI over legacy VGA infrastructure)
- Bidirectional RS–232 Extension — Enabling device control, such as control of the display from the source end, and control of a source from the display end
- True Plug–and–Play — No setup or user configuration is required
$416.00Low Price Guarantee - $416.00SKU: 50-00010390
Kramer 50-00010390 HDMI Ultra-Reach Transmitter with RS-232 & Loop, Over Any 2-Wire Cable (575)
- High Performance Extender — Reliable HDMI signal extension over distances of up to 600m (2000ft)
- Convenient Connector Options — Connect via one of 3 options: Terminal block (for common 2–wire connection), RJ–45 (CAT) (for typical long–distance applications), or VGA (to enable using HDMI over legacy VGA infrastructure)
- Cascaded Signal Distribution — The TP–752T transmitter has an active, reclocking HDMI output loop port for cascaded signal extenders or distributors, or local signal monitoring
- Bidirectional RS–232 Extension — Enabling device control, such as control of the display from the source end, and control of a source from the display end
- True Plug–and–Play — No setup or user configuration is required
$416.00Low Price Guarantee - $1,147.20SKU: 50-00003190
Kramer 50-00003190 4K60 4:2:0 Dual−link DVI Rx/Tx Extender Over Ultra−Reach Multimode Fiber
- Max. Data Rate - 13.5Gbps (2.25Gbps per graphic channel)
- Max. Resolution - HDTV: 480p, 720p, 1080p; Vesa: VGA to WQUXGA @33Hz (XGA not supported)
- 4K Compatible
- Not HDCP Compliant
- Standards Compliance - Supports DVI1.0, fully implemented by fiber−optic communication and DDC2B by virtual DDC; Class A digital device, pursuant to part 15 and 2 of FCC and CE
$1,147.20Low Price Guarantee - $1,032.00SKU: 94-0006150
Kramer 94-0006150 4K HDR HDMI Transmitter/Receiver Over Extended–Reach Multi–Mode Fiber Optic
- Max. Resolution — 4K@60(4:4:4)
- Max. Data Rate — 18Gbps
- HDMI Support — HDCP 2.2, EDID and CEC. 18Gbps, 3D content transmission, and HDR10 as specified in HDMI 2.0
- High Quality Connectors — 24K gold–plated and corrosion–resistant for the best possible connectivity
- K–Lock Pull–Resistant Connectors — Provides 15lbs of restraining force for a non–slip connection
$1,032.00Low Price Guarantee - $868.80SKU: 94-0006130
Kramer 94-0006130 3G SDI Rx/Tx Extender Over Ultra–Reach Single-Mode Fiber
- Maximum Data Rate — 3Gbps
- HDTV Compatible
- Multi–Standard Operation — SDI (SMPTE 259M and SMPTE 344M), HD–SDI (SMPTE 292M), 3G HD–SDI (SMPTE 424M) & DVB–ASI
- Laser Standards Compliance — IEC 60825–1, FDA 21CFR1040; Laser Class 1: Safety of laser products
- Kramer Equalization & re–Klocking™ Technology — Rebuilds the digital signal to travel longer distances
$868.80Low Price Guarantee - $1,480.00SKU: 94-0006120
Kramer 94-0006120 4K60 4:4:4 DP Transmitter/Receiver Over Extended–Reach Multi–Mode Fiber Optic
- Compliant with DisplayPortâ„¢ v1.2 specifications
- Max. Resolution — 4096x2160@60Hz
- Max. Data Rate — 21.6Gbps (5.4Gbps per lane)
- Supports Dual–mode DP (DP++)
- Max. Extension — 656ft (200m) over dual LC multi–mode OM3 fiber optic cable
$1,480.00Low Price Guarantee
Filter
Shopping Options
