Wireless Transmission
Add cameras where cabling is tough with our wireless transmitters & receivers. Build point-to-point links with wireless bridges, blanket areas using access points and wireless routers, and pair video transmitters with receivers for clean links. Fine-tune range and reliability with high-gain antennas. Most options support PoE and outdoor, long-range, line-of-sight installs.
Featured Wireless Transmission Manufacturers
- was $629.66 Special Price $455.80SKU: SK9011
Comelit SK9011 RF Receiver 868 MHz
- Basic Stand-Alone Hf 868 Mhz Receiver
- Integrated antenna
- Manage primary and secondary doors
- 12Vdc power supply
was $629.66 Special Price $455.80Low Price Guarantee - was $94.60 Special Price $69.30SKU: DNR00105
Linear DNR00105 MGR-2 2-Channel Gate Receiver, 318 MHz
- Two Form "A" (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
- Supplied with whip antenna, three feet of coaxial cable, and bulkhead connector
- Memory: storage for up to 40 MegaCode transmitters
- Power: 12 - 30 VAC or 10.5 - 30 VDC
- Codes: 1,000,000+ (MegaCode format)
was $94.60 Special Price $69.30Low Price Guarantee - was $361.50 Special Price $306.00SKU: NWADA1
Comnet NWADA1 External Dual Polarization 4.9-5.8GHz 19dBi 17 Degree Beamwidth Antenna
- Articulating Bracket Solution
- High gain, cost effective patented circuit design
- Low profile and rugged design for outdoor use
- US Engineered
was $361.50 Special Price $306.00Low Price Guarantee - was $1,430.44 Special Price $1,234.00SKU: NW1DR
Comnet NW1DR Industrially Hardened High Throughput and Scalable Dual Radio Wireless Bridge with Optional External Antenna
- Narrow Channel Spectrum Widths for large and noisy deployments
- 5,10,20 and 40 Mhz Channel Bandwidth Support
- Up to 240 Mbps Throughput
- 802.11a/n Compliant
- Distances up to 2 miles
was $1,430.44 Special Price $1,234.00Low Price Guarantee - was $192.60 Special Price $184.00SKU: NW4G-LTE1
Comnet NW4G-LTE1 4G LTE External Grade Cellular MIMO Antenna with 1M cable (1 required per switch)
- 4G LTE external grade cellular MIMO antenna with 1M cable (1 required per switch)
was $192.60 Special Price $184.00Low Price Guarantee - was $80.30 Special Price $76.73SKU: DNR00104
Linear DNR00104 MGR 1-Channel Gate Receiver, 318 MHz
- Single Form "A" (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
- Supplied with whip antenna, three feet of coaxial cable, and bulkhead connector
- Memory: storage for up to 40 MegaCode transmitters
- Power: 12 - 30 VAC or 10.5 - 30 VDC
- Codes: 1,000,000+ (MegaCode format)
was $80.30 Special Price $76.73Low Price Guarantee - was $898.00 Special Price $872.00SKU: NW10
Comnet NW10 Single Radio, 1 Gbps Port, 1 10/100Mbps Port PD and PSE support, 240Mb/s, FCC
- Narrow Channel Spectrum Widths for large and noisy deployments
- Up to 240 Mbps Throughput
- 802.11a/n Compliant
- Distances up to 2 mi (FCC) or 2km (ETSI)
- IEEE802.3at PoE Compliant PD on port 1
was $898.00 Special Price $872.00Low Price Guarantee - was $46.75 Special Price $45.75SKU: TM-20XNT
Keri Systems TM-20XNT Keri Key 2 Button Transmitter with NXT Insert
- 2-button model
- Uses CR2032 coin battery
- NXT Insert
- Extended range with optional, external antenna
was $46.75 Special Price $45.75Low Price Guarantee - $1,560.00SKU: 20-80598090
Kramer 20-80598090 2x2 4K60 USB-C/HDMI Wall-Plate Switcher Transmitter
- 4K60 4:4:4 AV and USB 3.2 coupled–signals switching
- K–Pair Auto–Switching Capability
- Built–in USB–C docking
- 100m HDBT 3.0 & HDMI independent outputs
- Secured remote control and management
$1,560.00Low Price Guarantee
Wireless Transmitters & Receivers Frequently Asked Questions
What is a wireless transmitter?
A wireless transmitter is a device that sends audio or video signals over the air without the need for physical cables. It typically uses radio frequency (RF) or Wi-Fi technology to transmit data to a receiver, allowing for flexible installation and mobility. Wireless transmitters are commonly used in security systems, allowing homeowners to monitor their properties without the clutter of wires.
How do I choose the right wireless receiver?
When selecting a wireless receiver, consider factors such as compatibility with your existing surveillance system, range, and signal strength. Look for receivers that support the same frequency as your transmitters and have features like encryption for security. Additionally, ensure it can handle the number of channels you need for your cameras or devices.
Are wireless surveillance systems reliable?
Yes, wireless surveillance systems can be reliable, provided they are installed correctly and maintained. Factors such as distance from the transmitter, interference from other devices, and environmental conditions can affect performance. Choosing high-quality equipment and ensuring proper placement can enhance reliability and provide consistent monitoring.
What is the range of wireless transmitters?
The range of wireless transmitters varies based on the technology used and environmental factors. Most consumer-grade wireless transmitters can operate effectively within a range of 100 to 300 feet indoors, while outdoor models may reach up to several miles, depending on line-of-sight conditions. Always check the specifications for the specific model you are considering.
Do wireless transmitters require power?
Yes, wireless transmitters typically require a power source to operate. Many models use batteries, while others may need to be plugged into an electrical outlet. Battery-operated transmitters offer flexibility in placement but require regular battery changes, whereas wired options provide a constant power supply but limit installation locations.
Filter
Shopping Options
