ICRealtime Wire Connectors
Filter
- $127.72SKU: BNC COMP-PRO
ICRealtime BNC COMP-PRO 50 x RG-59 Compression Connector, 25 Pack
- 3' (1m) 18 AWGX2C power jack to bare copper
$127.72Low Price Guarantee - $8.00$8.00Low Price Guarantee
- $8.00$8.00Low Price Guarantee
- $8.00SKU: BNC-Crimp
ICRealtime BNC-Crimp BNC Crimp-on Connector, 2 Pieces
- BNC crimp-on connector, 2 pieces
$8.00Low Price Guarantee - $220.00SKU: ICR-S45-1750P
ICRealtime S45-1750P PROSeries Pass-Through Shielded Cat6/Cat6a STP RJ45 Modular Plugs with Cap45 and Bar45 Technologies, Red Tint
- Combines both Cap45 and Bar45 technologies: Cap45 (Patent 10,811,831 B1) snaps over the front of the plug to cover exposed wire ends and eliminate electrical shorting risk, while the Bar45 load bar improves signal isolation and reduces crosstalk — the only shielded pass-through plug combining both technologies
- Two-piece plug design separates the plug body from the metal shield, allowing larger-diameter shielded LAN cables to be inserted further into the plug for dramatically improved, faster termination
- 3-Prong Pin Design with 50µ true 24ct gold plating; UL94 V-0 commercial rated, supporting CM through CMP and LSZH Eca to B2ca installations
- Red tint identification; manufacturer-certified channel performance reports available for Genesis, Remee, and SCP Cat6/Cat6a STP cable systems; for the equivalent unshielded ProSeries plug, see S45-1700P
$220.00Low Price Guarantee - $203.00SKU: ICR-S45-1155
ICRealtime S45-1155 Shielded Cat7a/Cat7/Cat6a RJ45 Modular Plugs with External Ground and Bar45 Technology, Orange Tint
- Standard WE/SS shielded RJ45 (8P8C) modular plug with external ground; specifically designed for FPE-insulated 10G shielded LAN cables (Cat7a, Cat7, Cat6a S/FTP, U/FTP, F/FTP); IEEE 802.3 10GBase-T compliant
- Addresses a historically difficult termination challenge: terminating shielded 10G LAN cables with standard RJ45 plugs was previously time-consuming and produced inconsistent Fluke test results on longer links — the S45-1155 was engineered specifically to solve this performance gap
- Bar45 load bar technology improves signal isolation and reduces crosstalk specifically tuned for the FPE-insulated 10G shielded cable construction
- Cost-effective alternative to industrial-style RJ45 field plug connectors, which are more expensive and still require more installer effort
$203.00Low Price Guarantee - $194.00SKU: ICR-S45-1150
ICRealtime S45-1150 Shielded Cat6 STP RJ45 Modular Plugs with External Ground and Bar45 Technology, Green Tint
- The two-piece design (rather than single-piece) was specifically engineered to handle the larger and more complex shielded cable termination, after testing determined a one-piece design could not reliably accommodate it
- 3-Prong Pin Design with 50µ true 24ct gold plating; green tint for identification; for FPE (foamed polyethylene) insulated shielded LAN cables typically found on 10G cables, see S45-1155 or the ProSeries S45-1755P instead
- Correct selection for Cat6 STP and Cat6a F/UTP cables with standard PE insulation — confirm insulation type before ordering, as FPE-insulated 10G cables require the S45-1155 or S45-1755P
$194.00Low Price Guarantee - $134.00SKU: ICR-S45-1700P
ICRealtime S45-1700P PROSeries Pass-Through Cat6/Cat6a UTP RJ45 Modular Plugs with Cap45 Technology, Red Tint, 100-Pack Jar
- Cap45 isolation cap (Patent 10,811,831 B1): an isolation cap/bar that snaps onto the front of the plug after termination, covering exposed wire ends and completely eliminating electrical shorting risk in the RJ45 socket from improperly trimmed wires or non-fully-compliant device sockets
- UL Listed — the only manufacturer to provide the UL Listed mark on pass-through RJ45 modular plugs, representing the strictest third-party verification of quality and safety standards in the industry
- 3-Prong Pin Design with 50µ true 24ct gold plating; recommended as the best pass-through RJ45 on the market for Cat6/Cat6a UTP cables specifically where PoE/PoH power delivery is involved
- Red tint identification; UL94 V-0 commercial rated; for shielded equivalent with Bar45, see S45-1750P
$134.00Low Price Guarantee - $123.00SKU: ICR-S45-1700
ICRealtime S45-1700 Pass-Through Cat6/Cat6a UTP RJ45 Modular Plugs with Hi/Lo Stagger Design, Red Tint, 100-Pack Jar
- Unshielded pass-through RJ45 (8P8C) modular plug; Hi/Lo staggered wire insertion; accommodates 23 AWG solid LAN cable wire conductor sizes 1.00mm–1.10mm (0.039"–0.043") found on larger Cat6 UTP and Cat6a UTP cables; max cable OD 7.4mm (0.291")
- Hi/Lo stagger insertion (vs. straight-line on S45-1600) accommodates larger wire conductor diameters typically found on heavier-gauge Cat6/Cat6a UTP cable constructions
- 3-Prong Pin Design with 50µ true 24ct gold plating; improved crosstalk performance via deeper cable insertion into the plug
- Red tint for identification; UL94 V-0 (IEC 60695-11-10) commercial rated, recommended for CMP plenum, CMR, CM, and LSZH up to B2ca rated LAN cables
$123.00Low Price Guarantee
Filter
Now Shopping by
Shopping Options 