- Complete Systems
-
Security Cameras
-
Recording
- Monitors
- Network
- Transmission
- Complete Systems
-
Security Cameras
-
Recording
- Monitors
- Network
- Transmission
- Security Products
- Audio
- Accessories
- Power Supplies
- Home →
- Power Supplies →
- Automation & Security →
- Timer Modules
Timer Modules
Product was successfully added to your shopping cart.- 6 or 12VDC operation is selectable
- Quick and extremely accurate time range adjustment from 1 second to 60 minutes
- LED indicates relay is energized
- Form "C" relay contacts are 5 amps at 120VAC/28VDC
- Current draw stand by 3mArelay energizes at 75mA
Availability: Usually ships the next business day- 112 to 24 volts AC or DC operation
- Standby current: 10mA (relay off) 50mA (relay on)
- Form “C” relay contacts are rated 10 amp @ 120VAC/28VDC
- EE Prom memory protects against loss of programming due to power failure
- Accurate crystal contr
Availability: Usually ships the next business day- 12~24 VDC Operation
- Programmable nuisance delay timer (0~3 seconds)
- Adjustable pre-delay timer (1~30 seconds)
- Adjustable post-delay timer (1~60 seconds)
- Selectable manual or automatic relocking after power loss
Availability: Usually ships within 3-5 business days- Adjustable timer from 1~180 seconds via an onboard potentiometer
- NO/NC Switch trigger
- Compact design: 13/16”x29/32”x5/8” (30x58x16 mm)
- 12~24 VAC/VDC Operation
- Current: 2mA (standby), 75mA (active)
Availability: Usually ships within 3-5 business days- Timer can be set from 1 second to 60 minutes
- Can be triggered by positive voltage (+DC), or closure or opening of dry contact
- Relay can be programmed to activate at the start or at the end of the timing cycle
- Relay can also be set to activate for one second at the end of the timing cycle
- Programmable for pulse (flash) activation
Availability: Usually ships within 3-5 business days- Two N.O. or N.C. Form C relays 10A@120VAC / 28VDC
- Each relay can be programmed for 50 events, for a total of 100 individual programmable events
- Events can be set weekly, daily, or hourly, over the course of an entire year
- Manual operation of relays without event programming
- One egress input per relay (2 total)
Availability: Usually ships within 3-5 business days- Enclosed terminals for a safer installation
- 12~24 VAC/VDC Operation
- Up to 60 programmable events
- Holiday function (up to 99 days)
- Easy-to-read backlit LCD
Availability: Usually ships within 3-5 business days- 12 to 24 Volt D.C. Operation
- Adjustable Time Delay
- SPDT (Form “C”) Relay
- Low Current Input Trigger (<1mA)
- Selectable Positive or Negative trigger
Availability: Usually ships the next business day- Two Digital Inputs
- Two Relay Outputs (jumper programmable "transistor open collector" output on relay 2)
- 4096 program bytes using SIMPLE programming language
- 4 general purpose Counters, range 0 to 255 counts
- 4 general purpose Timers, range 1/10 second to over 255 hours
Availability: Usually ships the next business day- 12 to 24 volts AC or DC operation
- Standby current: 10mA (relay off) 50mA (relay on)
- Battery charging current: 100mA
- Form “C” relay contacts are rated 10amp @120VAC/28VDC
- EE Prom memory protects against loss of programming due to power failure
Availability: Usually ships the next business day- Dual Channel Annual Timer with LCD display
- Multipurpose applications, e.g., access control, siren/ bell cut off module, dialer delay, guard tour supervisory time, etc.
- Fast, accurate time ranges from 1 sec. to 60 min.
- LCD Display
- LED indicates relay is energized
Availability: Usually ships the next business day- Triggers via positive DC (+) voltage, dry contact closure, or removal of contact closure
- Quick and extremely accurate time range adjustment from 1 second to 60 minutes
- Built-in reset feature which cancels timing cycle
- Repeat (flasher/pulse) mode
Availability: Usually ships the next business day- EE Prom memory protects against loss of programming due to power failure
- Accurate crystal controlled clock (DC operation)
- Alphanumeric LCD display simplifies programming
- Automatic compensation for leap year
- Lithium battery backup maintains clock and User friendly keyboard programming
Availability: Usually ships the next business day- EE Prom memory protects against loss of programming due to power failure
- Accurate crystal controlled clock (DC operation)
- Alphanumeric LCD display simplifies programming
- Automatic compensation for leap year
- Lithium battery backup maintains clock and User friendly keyboard programming
Availability: Usually ships the next business day- 12 - 24 volt AC or DC operation
- Rectified voltage output
- Isolated AC or DC voltage 3V-24V trigger
- Time adjustable from 1 second to 1minute
- On-board sounding device
Availability: Usually ships the next business day
