Power
- $352.57SKU: AL1024ULMR
Altronix AL1024ULMR Access Power Distribution Module w/ Power Supply/Charger, 5 PTC Class 2 Outputs, 24VDC @ 10A, FAI, 115VAC, Red BC400 Enclosure
- Automatic switch over to stand-by battery when AC fails (zero voltage drop)
- AC fails supervision (form "C" contacts)
- Low battery and battery presence supervision
- AC input and DC output LED indicators
- Power & input trigger LEDs
$352.57Low Price Guarantee - $157.20SKU: DTK-DR240P4N
Ditek DTK-DR240P4N DIN Rail Surge Protective Device
- Each model provides a 75,000 Amp/phase surge current rating to ensure powerful protection and a long service life
- Visual and remote end-of-life indicators enable proactive maintenance and the highest level of machine and system protection
- Compact, modular design for easy integration within machine control panels
- This model offers neutral to ground (N-G) protection
- Approved for UL508 control panels
$157.20Low Price Guarantee - $4,973.70SKU: ED5000RTXL
Minuteman ED5000RTXL Endeavor Rackmount On-Line UPS, 4556VA
- Simple parallel installations (no extra PCB required)
- Full digital signal processor
- Programmable frequency converter
- Easy-to-set user personalization
- Intelligent self diagnosis
$4,973.70Low Price Guarantee - $3,769.00$3,769.00Low Price Guarantee
- $3,670.00$3,670.00Low Price Guarantee
- was $2,623.92 Special Price $2,126.00was $2,623.92 Special Price $2,126.00Low Price Guarantee
- $2,123.00$2,123.00Low Price Guarantee
- $1,860.13$1,860.13Low Price Guarantee
- $1,343.65SKU: B-5248A
Alpha A-4800 B-5248A System Power Supply+Back up Batteries, 8A
- Non-returnable or refundable
$1,343.65Low Price Guarantee - $979.00SKU: BPSM-12-9
Securitron BPSM-12-9 Power Supply, 12 VDC, 9A
- UL Class 2 Listed
- 9 Amp
- Incorporate integral battery charging capability which keeps the sealed lead acid gel/cell at full charge in case of line voltage failure
- LED indication (AC & DC) showing power supply status
- AC status output terminals
$979.00Low Price Guarantee - $621.00SKU: AQS1216-16F2R2
Securitron AQS1216-16F2R2 16 Amp, 12 VDC Power Supply with Enclosure, 16 Outputs, 2 Relay, 2 Amp Glass Fuses
- All combinations of AQ power supplies and distribution boards are UL listed
- Single voltage 12VDC continuous output
- Up to 91% efficiency which results in decreased operating costs and lengthens the lifespan of electronics
- Tolerates brownout or overvoltage input ±15% of nominal voltage
- Thermal shutdown protection with auto restart
$621.00Low Price Guarantee - $548.69SKU: T1MK1F4SDCY
Altronix T1MK1F4SDCY 4-Door Access and Power Integration Kit - Trove1M1 with eFlow4NB, PDS8CB, ACM4CB, VR6
- Convenient knockout configuration:
- One (1) double knockout 1.948″ (1-1/2″ Conduit) / 1.701″ (1-1/4″ Conduit)
- Nine (9) double knockouts 1.362″ (1″ Conduit) / 1.115″ (3/4″ Conduit)
- 16 AWG galvanized steel backplane simplifies board layout and wire management - Enclosure accommodates up to two (2) 12VDC/7AH batteries
$548.69Low Price Guarantee - Convenient knockout configuration:
- $376.66SKU: MIC-IR-24PSU-UL
Bosch MIC-IR-24PSU-UL 24VAC-18VAC MIC400-IR and MIC400-PA Power Supply
- Provide all connections for power, telemetry and video for the MIC series range of PTZ cameras
- Weather-resistant, cast-aluminum IP65 enclosure
- Ground isolation and termination to control video grounding and to prevent ground loops
$376.66Low Price Guarantee - $319.00SKU: T3MK75F16Q
Altronix T3MK75F16Q 10A 24VDC Power Supply, eFlow102NB
- 10A 24VDC power supply, eFlow102NB
$319.00Low Price Guarantee - $309.95SKU: AL1012M220
Altronix AL1012M220 Access Power Distribution Module w/ Power Supply/Charger, 5 PTC Class 2 Outputs, BC400 Enclosure
- DC output LED indicator
- LEDs indicate condition of power outputs
- Input 220VAC 50/60Hz, 2.2A
- 12VDC outputs
- AC fail supervision (form "C" contact)
$309.95Low Price Guarantee - $306.95SKU: ALTV248300220
Altronix ALTV248300220 CCTV Power Supply, 8 Fused Outputs, 24/28VAC @ 14A, 220VAC, BC200 Enclosure
- 220VAC, 50/60Hz, 1.35A
- Secondary fuse rated @ 15A/32V
- AC power LED
- Power ON/OFF switch
- Spare fuses provided. (all models w/primary and/or secondary fuses)
$306.95Low Price Guarantee - $269.30SKU: ALTV615DC1016
Altronix ALTV615DC1016 16 Fused Outputs CCTV Power Supply, 6-15VDC @ 10A, 115VAC, BC300 Enclosure
- Short circuit and thermal overload protection
- Filtered and electronically regulated outputs
- AC power LED indicator and Power On/Off switch
- Unit maintains camera synchronization
- Illuminated Power Disconnect Circuit Breaker with manual reset
$269.30Low Price Guarantee - $175.00SKU: GWPOEIP-15
Ganz GWPOEIP-15 48VDC 802.23af Power Injector
- 48VDC Input Voltage
- PoE Compliancy
- 802.23af Power Injector
$175.00Low Price Guarantee - $145.50SKU: PS-821A
Ganz PS-821A 8 Output Power Supply, 175vA
- Outputs for 8 Cameras 4-8 Amps supply current)
- Individually-fused 24VAC outputs
- Surge-protected outputs
- AC Power LED indicator with Power On/Off switch
- Units maintain camera synchronization
$145.50Low Price Guarantee - $132.00SKU: PS-811A
Ganz PS-811A 8 Output Power Supply, 100vA
- Outputs for 8 Cameras (4-8 Amps supply current)
- Individually-fused 24VAC outputs
- Surge-protected outputs
- AC Power LED indicator with Power On/Off switch
- Units maintain camera synchronization
$132.00Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.
Filter
Shopping Options
