Power
- $106.37$106.37Low Price Guarantee
- $79.85SKU: BP-563C
ToteVision BP-563C Rechargeable 2200maH Battery Pack and Charger
- Rechargeable battery pack for LCD-410/ 411, LCD-562/565, LCD-642, LCD-702HD, and LCD-842 monitors
$79.85Low Price Guarantee - $78.25SKU: TM-9
Securitron TM-9 Time Mate Timer
- Miniature timer extends momentary switches
- Fits in outlet boxes with push buttons or key switches
- 3A SPDT relay energizes for 2 to 36 seconds
- Time setting is selected by easy to configure DIP switches
- Applications include releasing electric locks and shunting alarm contacts
$78.25Low Price Guarantee - $66.00SKU: DTK-2MHLP48B
Ditek DTK-2MHLP48B Voice, Data and Signaling Circuit Modular Surge Protection
- Protects two pairs per module
- Multi-stage, SAD technology, hybrid design, provides the best possible protection
- Six voltage levels available to protect all types of voice/data applications
- Hard-wired multi-base mounting system allows you to protect up to ten pairs with a common ground
- Suitable for use on both AC and DC circuits
$66.00Low Price Guarantee - $66.00SKU: PWR-AC-24H
ICRealtime PWR-AC-24H Converts 24VAC/DC To 12VDC Max Output 1000MA
- Converts 24VAC/DC to 12VDC max output 1000MA
$66.00Low Price Guarantee - $59.50SKU: T2885D
Altronix T2885D Open Frame Transformer, 28VAC @ 100VA, 115/220VAC Enclosure
- Input Voltage: 110 V AC
- Output Voltage: 28 V AC
- Current: 3.50 A Output Current
- Frequency: 50 Hz
- Input Voltage Range: 115 V AC to 230 V AC
$59.50Low Price Guarantee - $31.52SKU: ST-UV24-W50Q
Seco-Larm ST-UV24-W50Q Open-Frame Transformer, 24VAC/50W
- Use in a wide variety of applications, including CCTV, access control, and alarms
- Open-frame type
- Dual input voltage: 120/240VAC, 50/60Hz
- Works with the SECO-LARM series of power supply/chargers
$31.52Low Price Guarantee - $13,895.77SKU: SRT10KXLT-5KTF2
APC SRT10KXLT-5KTF2 Smart-UPS SRT 10kVA with Two 208/240V to 120V 5kVA Step-Down Transformers
- Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection
- Text and mimic diagrams that display modes of operation, system parameters and alarms
- Protects the initial investment in the UPS when migrating from tower to rack-mount environment
$13,895.77Low Price Guarantee - $115.20SKU: DTK-110C6APOE
Ditek DTK-110C6APOE 10 Gigabit Ethernet Surge Protection
- Primary protector for communications circuits
- Available with 110 shielded RJ connections
- Compatible with CAT5E, CAT6 and CAT6A circuits
- Protects all four pairs
- Multi-stage, SAD technology, hybrid design provides the best possible protection
$115.20Low Price Guarantee - $29.99SKU: KP400
TP-Link KP400 Kasa Smart Outdoor Plug with 2-Outlet
- Two sockets
- No hub required thanks to Wi-Fi connectivity
- Remote access via Kasa Smart app for iOS and Android
- Kasa Smart app compatible with Android 4.4 or higher and iOS 10 or higher
- Step-by-step wiring process in the Kasa Smart app simplifies installation
$29.99Low Price Guarantee - $1,795.08SKU: AP8932
APC AP8932 Rack PDU 2G, Switched, ZeroU, 30A, 100-120V
- 24 x NEMA 5-20R Outlets
- 1 x NEMA L5-20P Input Connection
- Base-T Ethernet & RJ12 Serial Interface
- 1920VA / 1900W Load Capacity
- 20A Maximum Input Current
$1,795.08Low Price Guarantee - $1,969.43SKU: SRT96RMBP
APC SRT96RMBP Smart-UPS SRT 96V 3kVA RM Battery Pack
- Hot-swappable batteries
- Advanced battery management included
- Multiple battery pack configuration
$1,969.43Low Price Guarantee - was $2,160.00 Special Price $1,236.00SKU: EXR1500RTHV
Minuteman EXR1500RTHV EXR Line Interactive Uninterruptible Power Supply
- 0.9 power factor - increased capacity without migrating to larger models
- NEW Alphanumeric LCD Dot Matrix display - easy access to key UPS statuses
- UPS configuration options via front panel - make key adjustments utilizing the front panel LCD
- Load shedding - two power banks allow equipment prioritizing for increased runtime
- Independent Battery Bypass - provides voltage regulation with surge and spike protection even when batteries are weak or dead
was $2,160.00 Special Price $1,236.00Low Price Guarantee - $1,032.84SKU: EC1500LCD
Minuteman EC1500LCD 1500 VA On-line Tower UPS with 6 Outlets
- True on-line, double-conversion technology
- Easy-to-read LCD display
- 0.9 output power factor
- Highly-efficient, Economy Mode option
- Output receptacle control with 2 banks
$1,032.84Low Price Guarantee - $531.67SKU: MAC6AMP-4
Macurco MAC6AMP-4 115VAC 60 Hz Power Supply, 6 Amp, 4 Outputs at 24VDC
- 115VAC 60 Hz Power Supply
- 6 Amp
- 4 outputs at 24VDC
$531.67Low Price Guarantee - $465.84SKU: VertiLine83C
Altronix VertiLine83C 8 Fused Outputs CCTV Power Supply, 24/28VAC @ 10A, 115VAC, 1U
- 24VAC or 28VAC @ 10 amp total output current
- 3 amp max per output
- Eight (8) fuse protected outputs
- 115VAC 60 Hzinput
- Twenty-four (24) individually selectable 24VAC or 28VAC power outputs with OFF position
$465.84Low Price Guarantee - $420.36SKU: D100-120-2401
Ditek D100-120-2401 100KA/Phase 120/240 Vac 1-Phase Wye, 3 Wire (+G)
- Suitable for use on distribution and branch panels
- 100,000 Amp peak surge current capacity ensures long service life
- Available in 7 voltage configurations
- Diagnostic LED indicates system power and SPD function
- Complies with ANSI/IEEE C62.41 and C62.45 Category B and C3 standards
$420.36Low Price Guarantee - $399.00SKU: NPD-9501A
IQsight by Bosch NPD-9501A 1-Port High PoE Midspan, 95W
- Supports high-power PoE/PoH and complies to both the IEEE 802.3af and the IEEE 802.3at standards.
- 60 W and 95 W models
- Mounts to a wall, shelf, bench, desktop, and to other units
$399.00Low Price Guarantee - $376.46SKU: VERTILINE3DV
Altronix VERTILINE3DV CCTV Power Supply, 8 PTC Outputs, 12VDC @ 8A, 220VAC, 1U
- 12VDC outputs rated @ 8A total current max. (1.0A per device, 2.5A max.)
- Eight (8) PTC protected power outputs
- Filtered and electronically regulated
- Eight (8) power LEDs
- Illuminated master power disconnect circuit breaker with manual reset
$376.46Low Price Guarantee - $303.97SKU: PS-MORD48240
Comnet PS-MORD48240 48VDC 240Watt DIN Rail Environmentally Hardened Power Supply
- Universal AC input: 85 to 264 VAC, 47-63Hz
- Small package size for limited space installations
- Mounts on standard 35 mm (DIN 3 or TS-35) DIN rail ″ "TS-35 x 7.5 or TS-35 x 15
- Wide operating temperature range: - 30° C to +70° C
- Natural convection cooling ″ "no troublesome fans
$303.97Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.




















