Power
- $38.27SKU: 0300-0914-03
American Dynamics 0300-0914-03 XFMR, Stepdown, 120/24VAC, 28VA Transformer
- XFMR, Stepdown, 120/24VAC, 28VA Transformer
$38.27Low Price Guarantee - was $2,160.00 Special Price $1,236.00SKU: EXR1500RTHV
Minuteman EXR1500RTHV EXR Line Interactive Uninterruptible Power Supply
- 0.9 power factor - increased capacity without migrating to larger models
- NEW Alphanumeric LCD Dot Matrix display - easy access to key UPS statuses
- UPS configuration options via front panel - make key adjustments utilizing the front panel LCD
- Load shedding - two power banks allow equipment prioritizing for increased runtime
- Independent Battery Bypass - provides voltage regulation with surge and spike protection even when batteries are weak or dead
was $2,160.00 Special Price $1,236.00Low Price Guarantee - $1,032.84SKU: EC1500LCD
Minuteman EC1500LCD 1500 VA On-line Tower UPS with 6 Outlets
- True on-line, double-conversion technology
- Easy-to-read LCD display
- 0.9 output power factor
- Highly-efficient, Economy Mode option
- Output receptacle control with 2 banks
$1,032.84Low Price Guarantee - $584.33SKU: NETWAY4E1WP
Altronix NETWAY4E1WP 4 Port Hardened PoE Switch with Power Supply/Charger
- Four (4) 10/100/1000 Mbps
- PoE/PoE+ (up to 30W) ports
- IEEE 802.3af (15W) and IEEE 802.3at (30W) compliant
- 120W total power
- Integral surge protection
$584.33Low Price Guarantee - $546.95SKU: MAXFIT38AP
Altronix MAXFIT38AP AL600ULXB UL Listed Sub-Assembly Power Supply
- Altronix AL600ULXB UL Listed Sub-Assembly power supply/charger converts a 115VAC, 60Hz input into a single 12VDC or 24VDC non-power-limited output
- It also offers a suite of features that includes AC fail supervision, battery presence, and low battery supervision
$546.95Low Price Guarantee - $531.67SKU: MAC6AMP-4
Macurco MAC6AMP-4 115VAC 60 Hz Power Supply, 6 Amp, 4 Outputs at 24VDC
- 115VAC 60 Hz Power Supply
- 6 Amp
- 4 outputs at 24VDC
$531.67Low Price Guarantee - $465.84SKU: VertiLine83C
Altronix VertiLine83C 8 Fused Outputs CCTV Power Supply, 24/28VAC @ 10A, 115VAC, 1U
- 24VAC or 28VAC @ 10 amp total output current
- 3 amp max per output
- Eight (8) fuse protected outputs
- 115VAC 60 Hzinput
- Twenty-four (24) individually selectable 24VAC or 28VAC power outputs with OFF position
$465.84Low Price Guarantee - $420.36SKU: D100-120-2401
Ditek D100-120-2401 100KA/Phase 120/240 Vac 1-Phase Wye, 3 Wire (+G)
- Suitable for use on distribution and branch panels
- 100,000 Amp peak surge current capacity ensures long service life
- Available in 7 voltage configurations
- Diagnostic LED indicates system power and SPD function
- Complies with ANSI/IEEE C62.41 and C62.45 Category B and C3 standards
$420.36Low Price Guarantee - $399.00SKU: NPD-9501A
IQsight by Bosch NPD-9501A 1-Port High PoE Midspan, 95W
- Supports high-power PoE/PoH and complies to both the IEEE 802.3af and the IEEE 802.3at standards.
- 60 W and 95 W models
- Mounts to a wall, shelf, bench, desktop, and to other units
$399.00Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.
Filter
Shopping Options
