PoE Repeater Modules
-
Altronix NetWayXT Ethernet Extender, 1 Port, 10/100, Passes PoE, Extends Data Additional 100m
- Repeater module extends range 100m (328 ft.) each
- Power and port status LEDs
- Compact insulated housing: 2.5" W x 3.8" D x 1.0" H
- Plug-and-play installation
- Auto detection & protection of legacy non-PoE cameras
-
Speco IPPOERPT PoE/LAN Repeater
- Extends both power and data 330' per repeater
- Purchase a second repeater for total run of 1000'
- No external power required
- Compatible with the 802.3af standard
- Supports gigabit network speeds
-
Altronix NETWAYXTG PoE/PoE+ Single Output Gigibit Repeater Module
- Interfaces with NetWay midspans to extend data (video) 100m
- PoE/PoE+, IEEE 802.3af (15W) and IEEE 802.3at (30W) compliant
- Maximum range of more than 600m is possible using multiple repeaters
-
Altronix NETWAYXTX 1 Port Ethernet Extender, 10/100, Extends Data Additional 100m
- Extends data 100m
- IEEE 802.3af (15W) and IEEE 802.3at (30W) compliant
- Port status LED
-
TRENDnet TPE-E110 Gigabit PoE+ Repeater/Amplifier
- Extends 100 meters for a total distance of up to 200 meters (656 ft.)
- Daisy chain up to 7 units for a total PoE+ network extension of 800 m (2,600 ft.)
- Plug and play installation
- No external power required
- Wall mountable
-
Cantek CTW-POE-EX01A 10/100M PoE Extender (Power Over Ethernet)
- Reduced Installation Cost
- More than 100m (328 ft.) Ethernet and PoE Connection
- Fully IEEE 802.3af/IEEE 802.3at compliant
- Lighting-proof and Compact design
- Plug and Play. No configuration Required
-
TRENDnet TPE-E100 Gigabit PoE+ Repeater
- Extends 100 meters for a total distance of up to 200 meters (656 ft.)
- Daisy chain two TPE-E100s for a total PoE+ network extension of 300 m (980 ft.)
- Plug and play installation
- No external power required
- Wall mountable
-
Altronix NETWAYXTL PoE Single Output Gigibit Repeater Module
- PoE Single Output Gigibit Repeater Module
-
Seco-Larm NR-P101FQ PoE Repeater
- Extends power and data beyond the normal limit of 328ft (100m)
- Compliant with standard PoE IEEE 802.3af
- Installs on Cat5e/6 4-pair UTP cable with RJ45 jacks
- Supports 10/100/1000 BASE-T transmission rates
- Passive operation – no external power required
