Network Switches
Power your IP cameras and NVRs cleanly with the right network switches. PoE/PoE+ simplifies cabling, while surveillance-friendly features like VLAN, QoS, IGMP Snooping, and port mirroring keep streams stable and secure. Choose from compact desktop models to rackmount and hardened industrial switches, then match your total PoE budget to the number of IP cameras you plan to run.
- $580.84SKU: SW08PE
Flir SW08PE 8 Ports POE Managed Switch
- Pre-loaded and pre-licensed video management software
- Build in 8-port PoE switch
- Supports wide range of cameras and analytics
- ONVIF Profile S-compliant
- Dual monitor display support
$580.84Low Price Guarantee - $1,442.75SKU: EC-4BY1SWCPOE-W
Pelco EC-4BY1SWCPOE-W 4 Port Ethernet Connect Switch
- Electrical Ports Support Autonegotiation for 10 Mbps or 100 Mbps, Full-Duplex or Half-Duplex Data
- Pre-Programmed Port for Uplink
- Full 10/100 Mbps Bandwidth
- Supports Multicast and Unicast
- Automatic MDI/MDI-X Crossover
$1,442.75Low Price Guarantee - $259.99SKU: TEG-S3160
TRENDnet TEG-S3160 16-Port Unmanaged 2.5G Desktop Switch
- 16 x 2.5G RJ-45 ports
- Compatible with existing Cat5e or better cabling
- Fanless design eliminates noise
- Rack mountable or wall mountable for installation flexibility
- 80Gbps switching capacity
$259.99Low Price Guarantee - $218.74SKU: DS-3E1318P-EI
Hikvision DS-3E1318P-EI Smart Managed 16-Port 100 Mbps PoE Switch
- 16 x 100 Mbps PoE Ports, 2 x Gigabit Combos Uplink
- IEEE 802.3at/af PoE Ports
- Network Topology Management, Alarm Push, Network Health Monitor
- 6 KV Surge Protection for PoE Ports
- AF/AT Camera Can Reach up to 980 ft (300 m) in Extend Mode
$218.74Low Price Guarantee - $479.99SKU: TEG-7124WS
TRENDnet TEG-7124WS 12-Port 10G Web Smart Switch
- 8 x 10G ports
- 4 x SFP+ ports
- Supports 1G/2.5G/10G link speeds
- Easy-to-use web-based management interface
- Supports IPv6, LACP, VLAN, QoS, and IGMP Snooping
$479.99Low Price Guarantee - was $768.00 Special Price $733.00SKU: CNFE8FX8US
Comnet CNFE8FX8US 8-Port 100 Mbps Unmanaged Switch (8FX)
- 10/100 Mbps Ethernet
- 10/100 BASE-T/TX electrical port
- 100 BASE-FX optical port
- Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
- Optical port supports 100 Mbps full duplex data
was $768.00 Special Price $733.00Low Price Guarantee - $697.96SKU: DS-3E1552P-SI
Hikvision DS-3E1552P-SI 48 Port Gigabit Smart POE Switch
- IEEE 802.3af/at PoE standard
- 48 x Gigabit PoE Ports, 2 × gigabit RJ45, 2 x fiber optical ports
- Total PoE Power Budget 470W
- PoE Watchdog, STP/RSTP, VLAN, SNMP, QoS
- 104 Gbps Switching Capacity
$697.96Low Price Guarantee - $81.32SKU: VT-4P60G
Vitek VT-4P60G 4 Port PoE Unmanaged Switch w/2 Port Uplink 60w
- 4 Port PoE Unmanaged Switch w/2 Port Uplink 60w
- 1000mbps -IEEE802.3/u/ab & 802.3af/at
- 30W Max per Port
- Metal case w/Surge
- NDAA Compliant
$81.32Low Price Guarantee - $1,113.00SKU: PS-7242IL-AT
Brickcom PS-7242IL-AT 24-port 10/ 100M PoE+ Web Smart Ethernet Switch
- PoE+ support
- Power Budget: 390 watts
- PoE ON/OFF Remote Control
- Web-based Configuration and Management
- 19" Industrial Size
$1,113.00Low Price Guarantee
Network Switches Frequently Asked Questions
What is a network switch and how does it work?
A network switch is a device that connects multiple devices on a computer network, allowing them to communicate with each other. It uses MAC addresses to forward data only to the intended device, improving network efficiency and performance.
How many ports do I need on my network switch?
The number of ports you need depends on how many devices you plan to connect, such as cameras, computers, and other networked equipment. It's advisable to have a few extra ports for future expansions to avoid needing to replace the switch later.
What is PoE and why is it important for surveillance?
Power over Ethernet (PoE) allows network cables to carry electrical power along with data. This is important for surveillance systems as it simplifies installation by eliminating the need for separate power sources for cameras, making setup easier and more efficient.
Can I use a managed switch for my home security system?
Yes, a managed switch can be used for home security systems. It provides advanced features such as VLANs, traffic management, and enhanced security protocols, which can help optimize the performance and security of your surveillance network.
What are the benefits of using a gigabit switch for my surveillance system?
A gigabit switch offers faster data transfer rates, reducing latency and ensuring smooth video streaming from multiple cameras. This is crucial for high-resolution surveillance footage, as it allows for real-time monitoring and quick access to recorded video without delays.















