Pelco EC-4BY1SWCPOE-W 4 Port Ethernet Connect Switch
SKU
EC-4BY1SWCPOE-W
Model No
EC-4BY1SWCPOE-W
$1,251.69
Product Highlights
- Electrical Ports Support Autonegotiation for 10 Mbps or 100 Mbps, Full-Duplex or Half-Duplex Data
- Pre-Programmed Port for Uplink
- Full 10/100 Mbps Bandwidth
- Supports Multicast and Unicast
- Automatic MDI/MDI-X Crossover
The EC-4BY1SWCPOE-W from Pelco is an ethernet Connect Ethernet switch with uplink management functionality that operates on the Ethernet over copper (EoC). It provides four ports operating at 10/100 Mbps and is designed to combine these four electrical ports into a single electrical extended port that forwards the data to the next network device. The switch does not require programming prior to use.
Features
- No Programming Required
- 10/100 Mbps Ethernet
– 4 x 10/100BASE-T/TX Electrical Ports Supporting PoE+
– 1 x 100 Mbps Extended Electrical Uplink - Transmits Four Individual Ethernet Data Channels Over Standard Cat5/Cat5e/Cat6 UTP Cable or Over Coaxial Cable
- Extends Ethernet up to 914 m (3,000 ft) at 10 Mbps or 610 m (2,000 ft) at 100 Mbps Over Cat5/Cat5e/Cat6 UTP Cable
- Extends Ethernet up to 1,524 m (5,000 ft) at 10 Mbps or 610 m (2,000 ft) at 100 Mbps Over Coaxial Cable
- Extended Temperature Operation of –40°C to 75°C (–40° to 167°F)
- 30 W PoE Capability on Ethernet Ports
- Electrical Ports Support Autonegotiation for 10 Mbps or 100 Mbps, Full-Duplex or Half-Duplex Data
- Pre-Programmed Port for Uplink
- Full 10/100 Mbps Bandwidth
- Supports Multicast and Unicast
- Automatic MDI/MDI-X Crossover
There are no related videos.
Write Your Own Review
Downloads & Manuals