Ties
- $1.60SKU: CW4016-A
ENS CW4016-A Raceway End Cap, Rectangular, 1.57" W × 0.63" H
- End cap for CW4016 40 × 16mm (1.57" W × 0.63" H) rectangular cable raceway; covers and seals the open terminal end of a CW4016 raceway run
- The largest end cap in the ENS CW series — sized for the 40mm wide × 16mm tall CW4016 profile; not interchangeable with CW2516-A (0.98" W × 0.63" H) or CW1510-A (15 × 10mm) end caps
- Provides a clean, professional finished appearance at each raceway termination point where cables enter or exit the raceway channel
- Snaps onto the terminal end of the CW4016 base and cover; white PVC; typically two end caps used per independent raceway run
$1.60Low Price Guarantee - $18.00SKU: CW4016
ENS CW4016 Raceway Cord Cover, 5 Feet, 1.57" W × 0.63" H with Adhesive Backing, Rectangular
- Rectangular PVC surface-mount cable raceway; 40mm wide × 16mm tall (1.57" W × 0.63" H); 5-foot section with adhesive backing
- Adhesive backing for quick tool-free mounting on flat wall surfaces; can also be screw-mounted through the base for permanent installation; same hinged/snap-on cover design as the CW1510 and CW2516 for easy cable insertion after mounting
- White PVC; pairs with CW4016 series fittings: end caps (CW4016-A) and the complete CW4016 fitting family for corners, connectors, flat bends, and tees
$18.00Low Price Guarantee - $1.60SKU: CW2516-T
ENS CW2516-T Raceway Equal Tee, Rectangular, 0.98" W × 0.63" H
- Raceway equal tee, 0.98" W × 0.63" H, rectangular; three equal 25 × 16mm openings for splitting or merging CW2516 raceway runs at a T-junction
- Used when a cable run must branch from one direction into two perpendicular directions
- All three tee openings are the same 25 × 16mm profile; any port can serve as incoming or outgoing
$1.60Low Price Guarantee - $1.60SKU: CW2516-L
ENS CW2516-L Raceway Flat Bend, Rectangular, 0.98" W × 0.63" H
- Flat 90° bend fitting for CW2516 25 × 16mm rectangular cable raceway; provides a 90° directional change within the same plane (horizontal turn along a wall, baseboard, or ceiling)
- Used for same-plane 90° turns — distinct from internal bends (CW2516-B, inside corners) and external bends (CW2516-C, outside corners) which handle vertical-to-horizontal corner transitions
- Sized for the 25 × 16mm CW2516 profile; white PVC; not interchangeable with CW1510-L or CW4016-L fittings
$1.60Low Price Guarantee - $78.00SKU: CW2516-KIT
ENS CW2516-KIT Raceway Cord Cover Kit, 3.5 Feet (10 Covers), Connectors & Accessories Included
- Complete CW2516 25 × 16mm raceway kit; 10 × raceway cover sections totaling approximately 3.5 feet; connectors, end caps, and bend fittings included for a complete installation
- 25 × 16mm mid-size profile accommodates two to three cables (e.g., CAT5/6 + coaxial, or multiple CAT5/6) in a single raceway run — more capacity than the CW1510-KIT without requiring the full-width CW4016
- PVC raceway with adhesive backing; white finish; all included fittings are the same 25 × 16mm profile as the CW2516 sections
- For longer or more complex installations
$78.00Low Price Guarantee - $1.60SKU: CW2516-H
ENS CW2516-H Raceway Connector, Rectangular, 0.98" W × 0.63" H
- Raceway connector, 0.98" W × 0.63" H, rectangular; joins two CW2516 25 × 16mm raceway sections end-to-end in a straight line
- Maintains a continuous enclosed cable channel across the joint between two 5-foot CW2516 sections — one connector required at each junction between raceway pieces in a straight run
- Sized for the 25 × 16mm CW2516 profile; white PVC; not interchangeable with CW1510-H or CW4016-H fittings
- Also used to couple CW2516 sections to end caps, bends, flat bends, and tee fittings
$1.60Low Price Guarantee - $1.60SKU: CW2516-C
ENS CW2516-C Raceway External Bend, Rectangular, 0.98" W × 0.63" H
- External (outside corner) 90° bend fitting for CW2516 25 × 16mm rectangular cable raceway; provides a clean 90° transition at outside wall corners and protruding edges
- Used when the CW2516 raceway must navigate around an outside building corner, pillar edge, or other convex 90° surface transition
- Sized for the 25 × 16mm CW2516 profile; white PVC; pair with CW2516-B (internal bend) for inside corners
$1.60Low Price Guarantee - $1.60SKU: CW2516-B
ENS CW2516-B Raceway Internal Bend, Rectangular, 0.98" W × 0.63" H
- Internal (inside corner) 90° bend fitting for CW2516 25 × 16mm rectangular cable raceway; provides a clean 90° transition at inside wall corners
- Allows the CW2516 raceway to turn at an inside corner where two walls meet at an interior angle without cutting or bending the raceway channel
- Sized for the 25 × 16mm CW2516 profile; white PVC; pair with CW2516-C (external bend) for outside corners and CW2516-L (flat bend) for same-plane 90° turns
$1.60Low Price Guarantee - $1.60SKU: CW2516-A
ENS CW2516-A Raceway End Cap, Rectangular, 0.98" W × 0.63" H
- End cap for CW2516 25 × 16mm (0.98" W × 0.63" H) rectangular cable raceway; covers the open terminal end of a CW2516 raceway run at each cable entry or exit point
- Provides a clean, professional finished appearance at raceway termination points — exposed open ends leave cut edges visible and the cable inside the raceway unprotected at the termination
- Snaps onto the terminal end of the CW2516 raceway base and cover; white PVC; sized specifically for the 25 × 16mm CW2516 profile
$1.60Low Price Guarantee
Filter
Shopping Options
