Ties
- $12.00SKU: CT-12W-50
ENS CT-12W-50 Zip Tie White 12 Inch 7.8mm, 50 Pieces
- White color: less conspicuous than black cable ties on white or light-colored cables (white alarm wire, white Cat6, white coaxial jacket) and in white raceway or light-colored cable tray installations
- 12-inch length and 7.8mm strap width provide the holding strength for large cable bundles, conduit bundling, and heavy cable group management; same specifications as CT-12B-50 in white
- For screw-hole mounting capability in white
$12.00Low Price Guarantee - $24.00SKU: CT-12B-50H
ENS CT-12B-50H Zip Tie with Screw Hole, Black, 12 Inch 7.6mm, 50 Pieces
- Screw hole in head: allows the cable tie to be anchored to walls, panels, conduit, and equipment frames with a single screw before tying the cable bundle — eliminates the need for separate adhesive cable tie mounts that can fail in warm or humid environments
- 12-inch length for large cable bundles; screw mount combined with 12-inch length creates a permanent, heavy-duty cable anchoring point capable of securing large, heavy cable groups
- Black UV-resistant nylon; suitable for indoor and outdoor anchor applications; for the same length without the screw hole
$24.00Low Price Guarantee - $12.00SKU: CT-12B-50
ENS CT-12B-50 Zip Tie Black 12 Inch 7.8mm, 50 Pieces
- 12-inch length accommodates large cable bundle diameters and provides long enough tail for easy cinching around large conduit, cable trays, and large multi-cable bundles
- 7.8mm strap width: the widest strap in the ENS CT zip tie lineup — provides the highest tensile strength and the widest load distribution across the cable bundle, reducing the risk of cable jacket damage under tension
- Black UV-resistant nylon: suitable for both indoor and outdoor installations; black coloring retards UV degradation for outdoor use on exterior cable bundles, conduit ties, and equipment mounting
- For shorter runs and smaller bundles
$12.00Low Price Guarantee - $72.00SKU: CS34-50B
ENS CS34-50B Cable Sleeve, 3/4" (19mm) 50 Feet, Black
- Expandable braided cable sleeve; 3/4" (19mm) nominal diameter; 50-foot roll; black braided polyester construction
- 3/4" (19mm) diameter: correctly sized for small cable bundles of 2–4 cables — a typical single-camera run with one coaxial and one power cable, or two Cat6 cables bundled together
- Expandable braid allows the sleeve to flex open for lateral insertion of cables on existing runs, then contracts snugly around the bundle; can be cut to any length without fraying
$72.00Low Price Guarantee - $204.00SKU: CS32-50B
ENS CS32-50B Cable Sleeve, 1.5" (38mm) 50 Feet, Black
- Expandable braided cable sleeve; 1.5" (38mm) nominal diameter; 50-foot roll; black braided polyester construction
- Expandable braid construction: the sleeve expands to allow cable bundles to be inserted from the side (for existing cable runs) or threaded from the end, then contracts snugly around the bundle — no need to disconnect cable ends to install
- 1.5" (38mm) diameter: the larger-diameter sleeve for large cable bundles — accommodates groups of 4–10 or more cables depending on individual cable diameters; correct for main cable trunk runs, equipment rack dressing, and multi-cable drops
- Black color: professional appearance in exposed cable management applications, equipment racks
$204.00Low Price Guarantee - $3.50SKU: CJ0201-S
ENS CJ0201-S J Hook 110.74 x 35.31 x 32mm
- Small J hook cable support; dimensions: 110.74mm (approximately 4.4") wide × 35.31mm (approximately 1.4") deep × 32mm (approximately 1.3") tall
- Small hook profile suited for single-cable or two-cable branch runs — the tail drops from a main above-ceiling trunk route to individual cameras, access control readers, or access points
- J saddle profile supports cables without crushing or excessive bending; the smallest profile in the CJ0201 series provides minimal visual impact at tight spacing intervals in above-ceiling installations
$3.50Low Price Guarantee - $4.10SKU: CJ0201-M
ENS CJ0201-M J Hook 123 x 67 x 33mm
- Medium J hook cable support; dimensions: 123mm (approximately 4.8") wide × 67mm (approximately 2.6") deep × 33mm (approximately 1.3") tall
- The medium hook width suits typical 3–6 cable bundle runs — the standard bundle size for a few Cat6 cables or a mix of Cat6 and coaxial cables routed together from a camera cluster to a central distribution point
- J saddle profile supports cables without pinching, crushing, or exceeding minimum bend radius; installs on hanger wire, beam flange, or ceiling grid support wire
$4.10Low Price Guarantee - $8.70SKU: CJ0201-L
ENS CJ0201-L J Hook 177.8 x 101.6 x 50.8mm
- Large J hook cable support; dimensions: 177.8mm (7") wide × 101.6mm (4") deep × 50.8mm (2") tall; for routing and supporting large bundles of low-voltage cables in above-ceiling and structural spaces
- The large 177.8mm width accommodates wide cable bundles — multiple Cat6, coaxial, and alarm cable runs grouped together in a single above-ceiling cable support — reducing the number of hooks required per linear foot of cable route
- J hook saddle profile: cables rest in the J-shaped trough without being pinched, crushed, or bent beyond their minimum bend radius — maintaining Cat6 performance standards that prohibit excessive bend radius or cable compression
$8.70Low Price Guarantee - $18.00SKU: CCKIT-WH
ENS CCKIT-WH Nail-In Clips Kit, 50 Pieces CC8S-WH, 20 Pieces CC16D-WH, 20 Pieces CC24D-WH
- Nail-in clips kit: 50 × CC8S-WH (8mm single, white), 20 × CC16D-WH (16mm dual, white), 20 × CC24D-WH (24mm dual, white); 90 clips total in assorted sizes for complete security cable runs
- All clips in white for clean, inconspicuous installation on white baseboards, door frames, and wall surfaces; all nail-in fasteners for hammer-drive installation into wood surfaces without separate screws, anchors, or drill
- Saves time during ordering and jobsite preparation — a single kit covers all cable sizes for a typical one- to four-camera installation without carrying three separate bags
- For larger jobs requiring higher clip counts
$18.00Low Price Guarantee
Filter
Shopping Options
