Ties
- $1.49SKU: CABLETIE-7H
Nascom CABLETIE-7H 7-1/2" Cable Tie, Catamount, UV Nylon, Natural, 1000 Pack
- 7-1/2" Cable Tie
- Catamount
- UV Nylon, Natural
- 1000 Pack
$1.49Low Price Guarantee - $1.52SKU: FE020375SRI8
Wire Trak FE020375SRI8 Surface Raceway 3/4" X 1/2" X 8' Ivory (160' Per Carton)
- 2-piece base-and-cover design with positive locking cover for easy cable loading and a clean, professional finish; ivory color coordinates with light-colored walls, baseboards, and millwork
- 375 series sizing (3/4" × 1/2") for moderate cable bundle capacity; 8-foot lengths packaged in bulk cartons (160 total feet) for efficient job-site supply
- Pre-applied adhesive backing for fast, no-drilling installation directly to walls and other mounting surfaces
- Compatible with the complete line of Wire Trak molded fittings (elbows, tees, end caps) in matching ivory finish for a fully coordinated installation
$1.52Low Price Guarantee - $1.52SKU: FE020375SRB8
Wire Trak FE020375SRB8 Surface Raceway 3/4" X 1/2" X 8' (160' Per Carton – 20 Pieces Per Box)
- 2-piece design: separate base and snap-on cover allows easy cable loading and a clean, finished appearance; positive locking mechanism keeps the cover securely in place
- 375 series sizing (3/4" × 1/2") accommodates moderate cable bundle capacity — the correct size step between the smaller and larger Wire Trak raceway series for typical low-voltage and power cable runs
- 8-foot lengths, 20 pieces per carton (160 total feet) — efficient bulk packaging for contractors and installers running multiple raceway segments across a job site
- Pre-applied adhesive backing enables fast, no-drilling mounting to walls, baseboards, and other flat surfaces;
$1.52Low Price Guarantee - $1.60SKU: CW4016-T
ENS CW4016-T Raceway Equal Tee, Rectangular, 1.57" W × 0.63" H
- Equal tee (T-junction) fitting for CW4016 40 × 16mm (1.57" W × 0.63" H) rectangular cable raceway; three equal 40 × 16mm openings for splitting or merging raceway runs at a T-junction
- Used when the CW4016 main cable trunk must branch to serve two directions simultaneously
- All three tee openings are the same 40 × 16mm profile; any port can serve as the incoming trunk and either of the other two as the branch outputs
$1.60Low Price Guarantee - $1.60SKU: CW4016-L
ENS CW4016-L Raceway Flat Bend, Rectangular, 1.57" W × 0.63" H
- Flat 90° bend fitting for CW4016 40 × 16mm (1.57" W × 0.63" H) rectangular cable raceway; provides a 90° directional change within the same plane
- Used for same-plane 90° turns — such as routing the main cable trunk along a baseboard and turning left or right at a room corner while remaining flat against the floor-level wall — distinct from inside corner (CW4016-B) and outside corner (CW4016-C) bend fittings
- Sized for the 40 × 16mm CW4016 profile; white PVC; not interchangeable with CW1510-L or CW2516-L fittings
- Pre-molded fitting ensures a consistent, professional 90° flat turn without cutting or bending the raceway sections
$1.60Low Price Guarantee - $1.60SKU: CW4016-H
ENS CW4016-H Raceway Connector, Rectangular, 1.57" W × 0.63" H
- In-line connector for CW4016 40 × 16mm (1.57" W × 0.63" H) rectangular cable raceway; joins two CW4016 sections end-to-end in a straight line
- Maintains a continuous enclosed cable channel across the joint between two 5-foot CW4016 sections — prevents cable from being exposed at the joint between pieces
- Essential for multi-section installations where the total cable run exceeds 5 feet; one connector per joint between raceway sections in a straight run
$1.60Low Price Guarantee - $1.60SKU: CW4016-C
ENS CW4016-C Raceway External Bend, Rectangular, 1.57" W × 0.63" H
- External (outside corner) 90° bend fitting for CW4016 40 × 16mm (1.57" W × 0.63" H) rectangular cable raceway; provides a clean 90° transition at outside wall corners and protruding edges
- Used when the CW4016 raceway must turn around an outside building corner, pillar edge, or other convex 90° surface — routing the cable trunk continuously from one wall face to the adjacent face without any exposed cable
- Sized for the 40 × 16mm CW4016 profile; white PVC; not interchangeable with CW1510-C or CW2516-C fittings
- Pair with CW4016-B (internal bend) for inside corners
$1.60Low Price Guarantee - $1.60SKU: CW4016-B
ENS CW4016-B Raceway Internal Bend, Rectangular, 1.57" W × 0.63" H
- Internal (inside corner) 90° bend fitting for CW4016 40 × 16mm (1.57" W × 0.63" H) rectangular cable raceway; provides a clean 90° transition at inside wall corners
- Allows the CW4016 raceway to turn at an inside corner where two walls meet at an interior angle — maintaining the enclosed cable channel across the corner without any cutting or bending of the raceway sections
- Sized for the 40 × 16mm CW4016 profile; white PVC; not interchangeable with CW1510-B (15 × 10mm) or CW2516-B (25 × 16mm) fittings
$1.60Low Price Guarantee - $1.60SKU: CW4016-A
ENS CW4016-A Raceway End Cap, Rectangular, 1.57" W × 0.63" H
- End cap for CW4016 40 × 16mm (1.57" W × 0.63" H) rectangular cable raceway; covers and seals the open terminal end of a CW4016 raceway run
- The largest end cap in the ENS CW series — sized for the 40mm wide × 16mm tall CW4016 profile; not interchangeable with CW2516-A (0.98" W × 0.63" H) or CW1510-A (15 × 10mm) end caps
- Provides a clean, professional finished appearance at each raceway termination point where cables enter or exit the raceway channel
- Snaps onto the terminal end of the CW4016 base and cover; white PVC; typically two end caps used per independent raceway run
$1.60Low Price Guarantee
Filter
Shopping Options
