ENS Ties
Filter
- $18.00SKU: CW4016
ENS CW4016 Raceway Cord Cover, 5 Feet, 1.57" W × 0.63" H with Adhesive Backing, Rectangular
- Rectangular PVC surface-mount cable raceway; 40mm wide × 16mm tall (1.57" W × 0.63" H); 5-foot section with adhesive backing
- Adhesive backing for quick tool-free mounting on flat wall surfaces; can also be screw-mounted through the base for permanent installation; same hinged/snap-on cover design as the CW1510 and CW2516 for easy cable insertion after mounting
- White PVC; pairs with CW4016 series fittings: end caps (CW4016-A) and the complete CW4016 fitting family for corners, connectors, flat bends, and tees
$18.00Low Price Guarantee - $18.00SKU: CC24D-WH
ENS CC24D-WH Dual Nail-In Clips, 24mm, White, 50-Pack
- Dual nail-in cable clip; 24mm cable diameter; white; 50-pack; accommodates two cables simultaneously
- 24mm clip opening: correct specification for larger-diameter cables (RG6 coax, jacketed Cat6, bundled cable runs) that do not fit within the 16mm CC16D-WH clip; dual body allows two cables side-by-side in one clip
- Nail-in fastener: driven into wood surfaces with a hammer — the fastest cable clip installation method for wood surface runs; no screwdriver, drill, or anchor required
- White color for inconspicuous installation on white baseboards, door frames, and wall surfaces
$18.00Low Price Guarantee - $16.00SKU: CW2516
ENS CW2516 Raceway Cord Cover, 5 Feet with Adhesive Backing, Rectangular
- Rectangular PVC surface-mount cable raceway; 25mm wide × 16mm tall (0.98" W × 0.63" H); 5-foot section with adhesive backing
- Mid-size profile in the ENS CW series — larger capacity than the CW1510 (15 × 10mm) for multi-cable runs, and more compact than the CW4016 (40 × 16mm) for installations where the largest profile is not required
- Adhesive backing for tool-free quick mounting on flat wall surfaces; can also be screw-mounted through the base for additional security
- Snap-on cover allows cables to be laid into the base channel after mounting, then covered without threading; cables can be added or removed without removing the raceway
$16.00Low Price Guarantee - $16.00SKU: CT-20-W
ENS CT-20-W 20'' White Wire Tie, 100Pc/Bag, 120 Lbs Tensile Strength, 7.2*500mm
- 20'' White Wire Tie
- 100Pc/Bag
- 120 Lbs Tensile Strength
- 7.2*500mm
$16.00Low Price Guarantee - $14.70SKU: CT-12-W
ENS CT-12-W 12'' White Cable Tie, 100Pc/Bag, 120 Lbs Tensile Strength, 7.2*300mm
- 12'' White Cable Tie
- 100Pc/Bag
- 120 Lbs Tensile Strength
- 7.2*300mm
$14.70Low Price Guarantee - $14.00SKU: CT-8W-100H
ENS CT-8W-100H Zip Tie with Screw Hole, White, 8 Inch 100 Pack 4.5mm
- White nylon zip tie with integrated screw hole in the head; length: 8 inches; cable tie width: 4.5mm; 100-pack
- Dual function: the screw hole in the cable tie head allows the tie to be mechanically anchored to a wall, conduit, raceway, or frame via a single screw — eliminating the need for a separate adhesive-backed cable tie mount
- Screw-mount anchor provides a far more reliable and permanent cable bundle anchor than adhesive mounts, which can debond in warm environments, high humidity, or on surfaces that cannot accept adhesive
- White color for clean, professional installations on white-painted walls, ceilings, and conduit where black cable ties would be visually conspicuous
$14.00Low Price Guarantee - $14.00SKU: CC16D-WH
ENS CC16D-WH Dual Nail-In Clips, 16mm, White, 50-Pack
- Dual nail-in cable clip; 16mm cable diameter; white; 50-pack; accommodates two cables simultaneously in a single clip
- Nail-in fastener: the clip is driven into wood surfaces (baseboards, door frames, wood studs) with a hammer — no drill, screwdriver, or anchor required; fastest installation method for wood surface cable runs
- 16mm diameter: sized for standard RG59 coaxial cable (approximately 6mm OD) in a dual-capacity body, or for a single larger cable up to the clip's internal diameter; confirm cable diameters before ordering
- White color for clean
$14.00Low Price Guarantee - $14.00SKU: CT-8B-100H
ENS CT-8B-100H Zip Tie with Screw Hole, Black, 8 Inch 4.5mm, 100 Pieces
- Screw hole provides mechanical surface anchoring for medium-to-large cable bundles; 8-inch length covers larger bundle circumferences than the 6-inch screw-hole tie, including conduit bundles and 4–6 cable groups
- Black UV-resistant nylon; 100-piece pack for high-volume installation use; for the white variant
$14.00Low Price Guarantee - $12.00SKU: CW1510
ENS CW1510 Raceway Cord Cover, 5 Feet with Adhesive Backing, Rectangular
- Rectangular PVC surface-mount cable raceway; 15mm wide × 10mm tall (approximately 0.59" W × 0.39" H); 5-foot section with adhesive backing for tool-free wall mounting
- Adhesive backing on the raceway base allows quick, tool-free mounting to flat wall surfaces without drilling; for additional security, the raceway base can also be screwed to the wall through pre-drilled mounting holes
- Hinged or snap-on cover (depending on design variant) allows the cable to be laid into the base channel and the cover snapped closed — no need to thread the cable through; cables can be added or removed after installation without removing the raceway
$12.00Low Price Guarantee
Filter
Now Shopping by
Shopping Options 