Transmission
Move video and data reliably over any distance with our transmission gear. Bridge long runs with fiber optic transmission, repurpose coax with UTP & baluns, or go cable-free using wireless transmission. Split and route sources via video distribution and matrix solutions, and convert streams with video encoders & decoders. For short hops and accessories, see data transmission—all built for surveillance uptime.
Featured Transmission Manufacturers
- $864.00SKU: 20-70011398
Kramer 20-70011398 4K60 4:4:4 HDMI Over Ultra-Reach Multi-Mode/Single-Mode Fiber Optic Input Card
- High Performance Standard Fiber Extender — HDMI fiber transmitter for providing ultra–reach signals over either multi–mode or single–mode optical fiber infrastructures, using Kramer pluggable OSP SFP+ units (multi–mode SFP+ included). Near–zero latency video chroma sub–sampling conversion technology is employed to auto–adapt above 10G HDMI signals to 10G optical link signal data–rate
- HDMI Signal Extension — HDCP 2.2 compliant and supports up to 18G (6G per channel) data rate, LPCM 7.1, Dolby True HD, and DTS–HD
- I–EDIDPro™ Kramer Intelligent EDID Processing™ — Intelligent EDID handling, processing and pass–through algorithm that ensures Plug and Play operation for HDMI source and display systems
- Bidirectional RS–232 Extension — Serial interface data flows in both directions, to enable data transmission and control of devices
- Cost–Effective Maintenance — Fiber link connection LEDs facilitate easy local troubleshooting
$864.00Low Price Guarantee - $2,448.00SKU: 20-70010198
Kramer 20-70010198 4-Channel 4K60 4:2:0 HDMI Over Extended Reach HDBaseT Output Card with Analog Audio
- Max. Data Rate — 10.2Gbps (3.4Gbps per graphics channel)
- Max. Resolution — 4K@60Hz (4:2:0)
- Analog Audio Embedding/De–embedding — On the same jack
- HDBaseT Technology — HDTV compatible, HDCP compliant
- System Range — Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp)
$2,448.00Low Price Guarantee - $2,304.00SKU: 20-70010098
Kramer 20-70010098 4-Channel 4K60 4:2:0 HDMI Over Extended Reach HDBaseT Input Card with Analog Audio
- Max. Data Rate — 10.2Gbps (3.4Gbps per graphics channel)
- Max. Resolution — 4K@60Hz (4:2:0)
- Analog Audio Embedding/De–embedding — On the same jack
- HDBaseT Technology — HDTV compatible, HDCP compliant
- System Range — Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp)
$2,304.00Low Price Guarantee - $1,232.00SKU: 20-70009998
Kramer 20-70009998 2-Channel SDI with Analog Audio Input Card
- Max. Data Rate — 3Gbps
- Multi–Standard Operation — SDI, HD–SDI, 3G HD–SDI
- Stereo Audio Embedding
$1,232.00Low Price Guarantee - $1,001.60SKU: 20-70009398
Kramer 20-70009398 2-Channel 4K HDR HDMI Over HDBaseT 2.0 DSC Output Card with Analog Audio
- Max. Data Rate — 18Gbps (6Gbps per graphics channel), 10Gbps DSC over CAT cable
- Max. Resolution — 4K@60Hz (4:4:4)
- Analog Audio Embedding/De–embedding or ARC — On the same jack
- HDBaseT Technology — HDTV compatible, HDCP 2.2/1.4 compliant
- System Range — Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp)
$1,001.60Low Price Guarantee - $520.00SKU: 60-0000290
Kramer 60-0000290 Wireless High Definition Transmitter
- Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel), Deep Color up to 12−bit
- Secure Link - Uses AES−128 bit encryption
- Connection Capacity - Up to four receivers can receive from one transmitter simultaneously; up to three transmitters associated with one receiver at any given time
- Transmission Range - Up to 30m (100ft) including through walls and furniture
- Automatic Frequency Selection - Selects the most suitable frequencies to prevent RF interference
$520.00Low Price Guarantee - $472.00SKU: 60-0000195
Kramer 60-0000195 Wireless High Definition Receiver
- Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel), Deep Color up to 12−bit
- Secure Link - Uses AES−128 bit encryption
- Connection Capacity - Up to four receivers can receive from one transmitter simultaneously; up to three transmitters associated with one receiver at any given time
- Transmission Range - Up to 30m (100ft) including through walls and furniture
- Automatic Frequency Selection - Selects the most suitable frequencies to prevent RF interference
$472.00Low Price Guarantee - $1,812.00SKU: 20-7001098
Kramer 20-7001098 4–Channel 4K60 4:2:0 HDMI Input Card
- Max. Data Rate - 8.91Gbps (2.97Gbps per graphics channel)
- Max. Resolution - 4K@60Hz (4:2:0)
- HDMI Support - 3D, Deep Color, x.v.Color™, Dolby® TrueHD, Dolby Digital Plus, DTS−HD®, and 7.1 multi−channel audio
- ARC Support
- HDTV Compatible
$1,812.00Low Price Guarantee - $1,084.00SKU: 20-7001198
Kramer 20-7001198 4–Channel 4K60 4:2:0 HDMI Output Card
- Max. Data Rate - 8.91Gbps (2.97Gbps per graphics channel)
- Resolution Support - Up to 4K@60Hz (4:2:0)
- HDMI Support - 3D, Deep Color, x.v.Color™, Dolby® TrueHD, Dolby Digital Plus, DTS−HD®, and 7.1 multi−channel audio
- HDTV Compatible
- HDCP Compliant
$1,084.00Low Price Guarantee
Transmission Frequently Asked Questions
What is video transmission in surveillance systems?
Video transmission refers to the process of sending video signals from a camera to a recording device or monitor. This can be done through various methods, including wired connections like coaxial cables or fiber optics, and wireless technologies. The quality and reliability of the transmission are crucial for ensuring clear video footage for security monitoring.
How does wireless video transmission work?
Wireless video transmission uses radio waves to send video signals from cameras to receivers without the need for physical cables. This method typically involves the use of Wi-Fi or other wireless protocols, allowing for greater flexibility in camera placement. However, it may be subject to interference and requires a stable power source for the cameras.
What are the benefits of using fiber optic transmission for surveillance?
Fiber optic transmission offers high bandwidth and long-distance capabilities, making it ideal for large surveillance systems. This technology is less susceptible to electromagnetic interference and provides superior image quality compared to traditional copper cables. Additionally, fiber optics can transmit data over several miles without degradation, ensuring reliable performance.
What is a balun and how is it used in video transmission?
A balun is a device that converts between balanced and unbalanced signals, commonly used in video transmission systems. It allows video signals to be sent over twisted pair cables or coaxial cables, facilitating longer distances without loss of quality. Baluns are particularly useful for integrating different types of video equipment in surveillance setups.
What should I consider when choosing a video transmission method for my home?
When selecting a video transmission method, consider factors such as distance between the camera and the recording device, environmental conditions, and the desired video quality. Wired options like coaxial or fiber optic cables provide stable connections, while wireless methods offer flexibility. Additionally, assess the installation complexity and the potential for future scalability of your surveillance system.
Filter
Shopping Options
