Transmission
Move video and data reliably over any distance with our transmission gear. Bridge long runs with fiber optic transmission, repurpose coax with UTP & baluns, or go cable-free using wireless transmission. Split and route sources via video distribution and matrix solutions, and convert streams with video encoders & decoders. For short hops and accessories, see data transmission—all built for surveillance uptime.
Featured Transmission Manufacturers
- $1,356.00SKU: NV-16PS13-PVD
NVT NV-16PS13-PVD Power Supply Passive Video Receiver Hub
- Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B
- Independently selectable 24VAC-OFF-28VAC with 1 Amp per channel
- Automatic-reset fault protection; transient protection
- Individually floating outputs ensure total ground-loop immunity
- Diagnostic LEDs show load/no load, miswires, and overload conditions
$1,356.00Low Price Guarantee - $1,355.15$1,355.15Low Price Guarantee
- $1,354.00SKU: TERRAIEX
Bogen TERRAIEX IP-Media/Audio In/EX Streamers
- 2 Mic/line balanced inputs
- 2 independent balanced line outputs
- 1 headphone output on mini-jack
- 1 SPDIF Transceiver - Optional
- Audio inputs: maximum level + 5 dB, bandwidth 20 Hz - 20 kHz
$1,354.00Low Price Guarantee - $1,354.00SKU: FVT110M1
Comnet FVT110M1 Digitally Encoded Video Transmitter/Data Transceiver, Sensornet, MM
- 10-bit digital video transmission
- One bi-directional data channel
- One 10/100 BASE-T/TX fast Ethernet port
- IEEE 802.3 compliant
- Automatic MDI/MDI-X crossover
$1,354.00Low Price Guarantee - $1,350.00SKU: CNFE1002BPOEMHO/M
Comnet CNFE1002BPOEMHO/M 10/100 Mbps Ethernet 2 Port Media Converter with PoE+
- Exceeds the requirements of the latest PoE+ standard (IEEE 802.3at)
- The Ethernet electrical interface auto-negotiates to either 10 or 100 Mbps without the need for any user selection
- The optical interface operates at 100 Mbps (100-FX)
- 60 watt higher output
- ST optical connector
$1,350.00Low Price Guarantee - $1,348.00SKU: RR-81
American Fibertek RR-81 8 Channels, Power Fail Safe, NO/NC Outputs
- Form-C (Normally Open or Normally Closed) Dry Contact Closure
- Latching Relays reduce power requirement
- User-Selectable feature maintains Contact Status through Power-Cycle and Loss-of-Optical-Power
- User Control to Reset all Contact Status
$1,348.00Low Price Guarantee - $1,348.00SKU: RT-81
American Fibertek RT-81 8 Channels Contact Closure System with Power Fail Safe
- Form-C (Normally Open or Normally Closed) Dry Contact Closure
- Latching Relays reduce power requirement
- User-Selectable feature maintains Contact Status through Power-Cycle and Loss-of-Optical-Power.
- User Control to Reset all Contact Status
- Diagnostics: DC Power, Optical Presence, and Channel Indicators
$1,348.00Low Price Guarantee - $1,338.81SKU: PACE8PRM
Altronix PACE8PRM 8 Port Long Range Ethernet Receiver, 100Mbps Per Port, Requires 1U Compatible Transceiver
- Extend Network link distance in an industrial environment
- Works with Megapixel, HD720, HD1080 and VGA (SD) cameras
$1,338.81Low Price Guarantee - $1,337.47SKU: VMS-4U1616
Veilux VMS-4U1616 Commercial Modular Matrix Switcher (4u Unit) 16 Video Inputs 16 Video Outputs
- Camera Title Input Through PC, Built-in IP Port
- Plug-in Scalable High Density Architecture for Easy Expansion, 4U Standard Aluminium Alloy Case
- Password Protection to Prevent Unauthorized Operating; System Partitioning with Different Keyboard Priorities
- Video / Audio Port and Communications Port with Surge Protection and Lightning Proof
- Computer Backup for System Set, Hot Backup Mainframe Option Design
$1,337.47Low Price Guarantee - $1,336.70SKU: NV-EC1701U-KIT4
NVT NV-EC1701U-KIT4 Quadruple Entry Station Eo2 Transmission System
- 100 BaseT transmission; Network speeds up to 93 Mbps; Up to 1,000ft (305m)
- One NV-EC1701U transceiver at the network-end can support multiple remote transceivers/IP cameras
- 56 VDC is distributed over the coax to all connected equipment
- Powers PoE, PoE+, or High Power PoE cameras (or other PoE devices), up to 50 watts
- Easy configuration, no PC required
$1,336.70Low Price Guarantee - $1,333.00SKU: MX-46-FX-SC-PoE-HP
American Fibertek MX-46-FX-SC-PoE-HP Ethernet FX Fiber Port + 2 RJ45 Ports, MM
- Complete Fiber Optic to Twisted Pair Media Interface
- Auto Negotiate 10/100 Ports
- Auto MDI/MDIX Detection
- Link and Activity Indicators for UTP and Fiber Ports
- Singlemode Fiber
$1,333.00Low Price Guarantee - $1,331.00SKU: MR-91P8C
American Fibertek MR-91P8C 10 Bit Video / Audio Module Rx 1310/1550nm 12dB 4Km MM 1 Fiber
- 10 Bit Video / Audio Module Rx 1310/1550nm 12dB 4Km MM 1 Fiber
$1,331.00Low Price Guarantee - $1,323.00SKU: CWFE2COAX
Comnet CWFE2COAX Dual Channel Ethernet over Coax
- Commercial Grade
- Supports transmission distances of up to 305 meters (1000 feet) over standard 75 ohm coaxial cable, at symmetric data rates up to 100 Mbps
- Fully compliant with IEEE 802.3 for Ethernet equipment
- 100 BASE-TX Ethernet input/output port
- Automatic MDI/MDI-X crossover
$1,323.00Low Price Guarantee - $1,314.00SKU: CNGE22MC
Comnet CNGE22MC Port (2 Channel) 10/100/1000 Mbps Ethernet Media Converter
- Full-duplex transmission of 10/100/1000 Mbps Ethernet
- IEEE 802.3 compliant
- 10/100/1000 BASE-TX port supports auto-negotiation and automatic MDI/MDI-X crossover for full and half-duplex operation
- Uses customer-installed ComNet SFPs for compatibility with a wide range of optical fibers, optical connector types, and optical transmission distances of up to 120 km (SFPs ordered separately)
- Designed for installation in harsh out-of-plant/unconditioned industrial or roadside operating environments (-40º to +75ºC ambient). Fully compliant with the environmental requirements of NEMA TS-2 for Traffic Signal Control Equipment
$1,314.00Low Price Guarantee - $1,311.95SKU: FTD4S1ST
Pelco FTD4S1ST 4 Channel ST Fiber Transmitter Bidirectional Data, Single Mode
- Single-Mode Support for Distances up to 69 km (42.9 mi)
- Laser Diode for Transmission of Optical Signals
- Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
- LED Status Indicators for Monitoring All Critical Operating Parameters
- Voltage Transient Protection on All Power and Signal Input/Output Lines
$1,311.95Low Price Guarantee - $1,309.00SKU: VR4030-R3
GE Security Interlogix VR4030-R3 FM Video Receiver, SM or MM, 1 Fiber
- Frequency Modulation for High Quality Video Transmission
- Meets Some Requirements for RS-250C Medium-Haul Transmission
- Directly Compatible with All NTSC, PAL, or SECAM CCTV Camera Systems
- LED Status Indicators Provide Rapid Indication of Critical Operating Parameters
- Solid-State Current Limiters on All Power Lines Provide Equipment Protection
$1,309.00Low Price Guarantee - $1,302.45SKU: RT-91P8C
American Fibertek RT-91P8C 1 Fiber 10 Bit Video/Audio Rack Card, Multimode
- 1 Fiber 10 Bit Video/Audio Rack Card
- Multimode
$1,302.45Low Price Guarantee - $1,302.45SKU: MT-9P89C
American Fibertek MT-9P89C Multi-protocol Bi-directional Audio & Contact, Module Transmitter, Multi-Mode, 1 Fiber
- 24Bit Digital Audio
- Diagnostics: Audio, Data, Contact, Power & Optical Presence
- Automatic Resettable Fuses on Power Lines
$1,302.45Low Price Guarantee - $1,302.45SKU: RR-9P88C
American Fibertek RR-9P88C 24 Bit Digital Audio 2 Channels Rack Card 12dB, Multi-Mode 1 Fiber
- 24Bit Digital Audio
- Diagnostics: Audio, Data, Contact, Power & Optical Presence
- Automatic Resettable Fuses on Power Lines
$1,302.45Low Price Guarantee - $1,302.32SKU: CNFE2002S1APoE/HO/M
Comnet CNFE2002S1APoE/HO/M 2 Channel 10/100 Mbps Ethernet Electrical To Optical Media Converter
- 60W PoE+ on ports 1
- 10/100 Mbps Ethernet
- 2 × 10/100 BASE-T/TX electrical ports
- 100 BASE-FX optical port
- Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
$1,302.32Low Price Guarantee
Transmission Frequently Asked Questions
What is video transmission in surveillance systems?
Video transmission refers to the process of sending video signals from a camera to a recording device or monitor. This can be done through various methods, including wired connections like coaxial cables or fiber optics, and wireless technologies. The quality and reliability of the transmission are crucial for ensuring clear video footage for security monitoring.
How does wireless video transmission work?
Wireless video transmission uses radio waves to send video signals from cameras to receivers without the need for physical cables. This method typically involves the use of Wi-Fi or other wireless protocols, allowing for greater flexibility in camera placement. However, it may be subject to interference and requires a stable power source for the cameras.
What are the benefits of using fiber optic transmission for surveillance?
Fiber optic transmission offers high bandwidth and long-distance capabilities, making it ideal for large surveillance systems. This technology is less susceptible to electromagnetic interference and provides superior image quality compared to traditional copper cables. Additionally, fiber optics can transmit data over several miles without degradation, ensuring reliable performance.
What is a balun and how is it used in video transmission?
A balun is a device that converts between balanced and unbalanced signals, commonly used in video transmission systems. It allows video signals to be sent over twisted pair cables or coaxial cables, facilitating longer distances without loss of quality. Baluns are particularly useful for integrating different types of video equipment in surveillance setups.
What should I consider when choosing a video transmission method for my home?
When selecting a video transmission method, consider factors such as distance between the camera and the recording device, environmental conditions, and the desired video quality. Wired options like coaxial or fiber optic cables provide stable connections, while wireless methods offer flexibility. Additionally, assess the installation complexity and the potential for future scalability of your surveillance system.
Filter
Shopping Options
