Vitek Speco Nitek Transmission
Move video and data reliably over any distance with our transmission gear. Bridge long runs with fiber optic transmission, repurpose coax with UTP & baluns, or go cable-free using wireless transmission. Split and route sources via video distribution and matrix solutions, and convert streams with video encoders & decoders. For short hops and accessories, see data transmission—all built for surveillance uptime.
Featured Transmission Manufacturers
Filter
- $72.00SKU: UTPGLPR
Speco UTPGLPR Video Ground Loop Isolator for UTP, Pair
- BNC male to 2 pin terminal block (UTPGL) or BNC female to BNC male with mini cable on both sides (VIDGL)
- Built-in video BALUN transmits a full motion monochrome video signal up to 1900', color video signal up to 980'
- Eliminates coaxial cable
- Built-in TVS (transient voltage suppressors) for surge protection
$72.00Low Price Guarantee - $1,120.90SKU: OSW8T
Speco OSW8T 8 Channel Wall Mount Encoder for HD-TVI and Analog Cameras
- Can convert up to 8 HD-TVI/Analog cameras to IP @ 30FPS
- Includes Built-in PoE (802.3af/at) Switch with uplink port (1Gbps)
- H.265/H.264/MJPEG compression supported
- Can power up to 8 TVI/Analog cameras with the DC 12V output on each channel
- Micro SD card slots for each channel for edge storage
$1,120.90Low Price Guarantee - $1,082.00SKU: VT-104VWD
Vitek VT-104VWD Transcendent 4-Channel Decoder, with High-Performance SOC
- 4 × HDMI@1080P, HDMI1 & HDMI3 Support 4K
- 4 × VGA output, 4 × BNC output
- Support PS, RTP, TS, ES package format (platform running mode)
- Support NTSC & PAL video formats
- H.265 HP / MP / BP and H.264 HP / MP / BP
$1,082.00Low Price Guarantee - $882.00SKU: VT-QHD4
Vitek VT-QHD4 On Cue 4 Channel Analog Interface
- 960H Quad Splitter
- 4 Inputs: 960H, 720H or SD per Input
- 2 Outputs: 1 HDMI and 1 HD-SDI
- Output Format: HDMI - Only 1080p 60 ; HD-SDI - 1080p 60 & 30
- 75Ω Impedance Input & Output (Error Range: ±1%)
$882.00Low Price Guarantee - $642.50SKU: OD101
Speco OD101 Dual-Codec 1 Channel Hardware Decoder
- Dual-codec (H.264 & MJPEG)
- Small footprint, low power
- IP video, ADPCM audio
- CVBS and audio output
- Automatic reconnection in case of network failure
$642.50Low Price Guarantee - $340.17SKU: TVI16UTP
Speco TVI16UTP 16 Channel Passive Transceiver
- Send TVI camera signals up to 800' over UTP cable
- 16 port passive HD video transceiver in 1U 19″ rack mounting panel
- Choice of 4 x RJ45 or 4 sets x 8 pin removable screw terminal for 16 channels of HD-TVI inputs /outputs
- Also works with AHD/CVI/CVBS signals over UTP cable
- Passive, no power required
$340.17Low Price Guarantee - $293.33SKU: VT-DD16
Vitek VT-DD16 16 Output RS-485 Data Distributor
- 1x - RS232 / 2x - RS485 Data Input
- 16x RS485 outputs
- Connection can be cascaded to other VT-DD08/VT-DD16 Units
- 12VDC Operation with 350mA Consumption
- Standard 1U Form Factor
$293.33Low Price Guarantee - $292.90SKU: O2675T
Speco O2675T 2 Megapixel Covert Wall Plate IP Camera with Advanced Analytics
- Fits into a single gang electrical box (included)
- Brushed stainless steel faceplate
- Full HD 1080p @ 30fps
- Additional 960H analog output
- 12VDC operation
$292.90Low Price Guarantee - $234.83SKU: MUHF101
Speco MUHF101 UHF 700 Frequency-Selectable Professional Microphone Line
- Auto-scan function can locate interference-free channels easily
- True Diversity technology ensures quality reception
- Constructed from durable plastic with a ½ rack design
- Squelch adjustment
- Balanced XLR connector and unbalanced ¼″ jack audio output
$234.83Low Price Guarantee
Transmission Frequently Asked Questions
What is video transmission in surveillance systems?
Video transmission refers to the process of sending video signals from a camera to a recording device or monitor. This can be done through various methods, including wired connections like coaxial cables or fiber optics, and wireless technologies. The quality and reliability of the transmission are crucial for ensuring clear video footage for security monitoring.
How does wireless video transmission work?
Wireless video transmission uses radio waves to send video signals from cameras to receivers without the need for physical cables. This method typically involves the use of Wi-Fi or other wireless protocols, allowing for greater flexibility in camera placement. However, it may be subject to interference and requires a stable power source for the cameras.
What are the benefits of using fiber optic transmission for surveillance?
Fiber optic transmission offers high bandwidth and long-distance capabilities, making it ideal for large surveillance systems. This technology is less susceptible to electromagnetic interference and provides superior image quality compared to traditional copper cables. Additionally, fiber optics can transmit data over several miles without degradation, ensuring reliable performance.
What is a balun and how is it used in video transmission?
A balun is a device that converts between balanced and unbalanced signals, commonly used in video transmission systems. It allows video signals to be sent over twisted pair cables or coaxial cables, facilitating longer distances without loss of quality. Baluns are particularly useful for integrating different types of video equipment in surveillance setups.
What should I consider when choosing a video transmission method for my home?
When selecting a video transmission method, consider factors such as distance between the camera and the recording device, environmental conditions, and the desired video quality. Wired options like coaxial or fiber optic cables provide stable connections, while wireless methods offer flexibility. Additionally, assess the installation complexity and the potential for future scalability of your surveillance system.
