Wireless Transmitters & Receivers
-
Comnet NWK9IC Ultra-High Throughput, Impact-Resistant Hardened Wireless Ethernet Kit
- Up to 500 Mbps throughput
- Sturdy cast aluminum enclosure
- IEEE802.3at PoE Compliant PD
- Over current protection and 3 layers of Ethernet surge suppression on the PD port
- 802.11ac Compliant
-
Comnet NWK1-P5T Hardened 6-Port Wireless Ethernet Kit Contains NWK-1, CNFE5SMSPOE, PS48VDC-5A
- Secure transmission: WPA2 – AES or TKIP encryption
- Comnet Antenna alignment feature eases installation and setup
- RF Spectrum Survey Tools
- Antenna Alignment Tools
- LED array displays unit operational status along with received signal strength
-
Comnet NWK1 Hardened Point-To-Point Wireless Ethernet Kit, Contains Client And Remote Units
- Pre-configured Access Point and Client units for quick setup
- Up to 95 Mbps Throughput
- 802.11a/n Compliant
- Distances up to 2 mi (FCC) or 2km (ETSI)
- Powered by the included power injection module or by an IEEE802.3af PoE compliant device
-
Comnet NWK11IC-M Mini Industrially Hardened Point-To-Point Wireless Ethernet Kit for Short Range Deployments
- Complete wireless kit consisting of two radios, power supplies, and mounting hardware
- 5, 10, 20 and 40 Mhz Channel Bandwidth Support
- Scalable - Narrow Channel 5 and 10 MHz Bandwidths will allow you to expand your WLAN without losing reliability by increasing the total number of non-overlapping channels
- Up to 100 Mbps Throughput
- 802.11a/n Compliant
-
Comnet NWK11-M Mini Industrially Hardened Point-To-Point Wireless Ethernet Kit for Short Range Deployments
- Complete wireless kit consisting of two radios, power supplies, and mounting hardware
- 5, 10, 20 and 40 Mhz Channel Bandwidth Support
- Scalable - Narrow Channel 5 and 10 MHz Bandwidths will allow you to expand your WLAN without losing reliability by increasing the total number of non-overlapping channels
- Up to 100 Mbps Throughput
- 802.11a/n Compliant
-
Comnet NWK11E-M Mini Industrially Hardened Point-To-Point Wireless Ethernet Kit for Short Range Deployments
- Complete wireless kit consisting of two radios, power supplies, and mounting hardware
- 5, 10, 20 and 40 Mhz Channel Bandwidth Support
- Scalable - Narrow Channel 5 and 10 MHz Bandwidths will allow you to expand your WLAN without losing reliability by increasing the total number of non-overlapping channels
- Up to 100 Mbps Throughput
- 802.11a/n Compliant
-
Linear 620-101447 Monitored Receiver and Transmitter Kit, Miller Rb-G-K10 (R-Band)
- Monitored Receiver and Transmitter Kit
- Miller Rb-G-K10 (R-Band)
-
ELK M1XRFTWM M1 Two-Way Wireless Transceiver
- Allows up to 144 individual wireless zones (sensors/points)
- Operates from the 4 wire RS-485 Data Bus
- Up to 4 M1XRFTWM transceivers may be connected to a single M1 or M1EZ8 control for redundancy and greater coverage
- Flash memory for firmware updates
-
RVS Systems RVS-DS55 Waterproof Wireless Transmitter for SimpleSight Series
- Connects To SimpleSight Wireless Backup Camera Systems
- Make Any Wired CMOS Camera Wireless
- Completely Waterproof - IP68
- Instant Pair - pair system without leaving your cab