Vitek VT-WB2150 Air Series High Speed 5.8GHz PoE Wireless Bridge

High speed transmission of 150MBps and a wireless range of 1.25 miles (2km), the VITEK VT-WB2150 eliminates the need for expensive and troublesome long-distance cables in areas where CCTV monitoring and rigorous surveillance take place. This small, lightweight and durable unit is easy-to-install and easy to use with an innovative and straightforward 10-button plug-and-play dip switch that facilitates the creation of a robust wireless network without a computer. Set-up can be simply configured for point-to-point or point-to-multipoint topology depending on the application, with up to 128 IP group configurations.

Features

• Advanced Qualcomm Atheros AR9344 600MHz Chipset
• 64MB DDR2 Memory, 8MB Flash Storage
• Low interference, High Stability, 1.25 Mile (2km) Range
• Tool-free installation, with no computer necessary
• Innovative and easy-to-use 10-Switch DIP Function, automatically syncs AP and CPE points
• Wirelessly connect up to 4 CPE points to one AP point for true Point-to-Multi-Point (P2MP) Topology!
• 128 IP Groups, Automatic Matching Transmission
• Compact and stylish exterior is made with durable, weather-resistant ABS and PC Material (IP65 rating)
• Wired Equivalent Privacy (WEP), SNMP Management Information Base (MIB), Telnet, and Serial Management
• Direct Sequence Spread Spectrum (DSSS) Transmission
• CSMA/CA, TCP/IP, IPX/SPX, NetBEUI, DHCP, NDIS3, NDIS4, NDIS5 Protocol
• 5180MHz~5240MHz / 5745MHz~5825MHz Channel
• 12Dbi Antenna Gain, with Vertical Polarization and 4900 6100MHz
• WEP 64/128bits, WPA, WPA2, 802.1x Security Encryption
• IEEE802.11a, IEEE802.11n, IEEE802.3u Standard
• Dual 10/100Mbps Ethernet Ports
• PoE24V (1A) Injector Power Supply Included