Comnet NW7E Individual Hardened Single Radio, Two Gb Ethernet Ports

The NetWave® NW7E environmentally hardened High Throughput (HT) wireless Ethernet transmission device can be configured through the embedded User Interface as a Client or as an Access Point. This single radio model was designed for high throughput point-to-point or multi-point applications and comes with an integrated 19 dBi, 17º beamwidth antenna. The NW7E supports up to 240 Mbps throughput using MIMO technology. The units can be powered by an 802.3af/at PoE compliant device or through a sold-separately PoE injector with the second Ethernet port serving as an IEEE802.3at power source. The NW7E is ETSI, DFS and TPC certified for use in the European Union.

Features

• High throughput: Up to 180 Mbps in one direction, Up to 240 Mbps total full duplex
• IEEE802.3at PoE Compliant PD and PSE
• Over current protection and 3 layers of Ethernet surge suppression on the PD port
• 802.11a/n Compliant
• Distances up to 2km (ETSI)
• Environmentally Hardened -40º to +70ºC
• Meets class IP67 dust and water immersion protection standards
• ETSI Standards (EU Region only): DFS Dynamic Frequency Selection, TPC Transmit Power Control
• Secure transmission: WPA2 – AES or TKIP encryption
• ComNet Antenna alignment feature eases installation and setup
• RF Spectrum Survey Tools
• Antenna Alignment Tools
• LED array displays unit operational status along with received signal strength