ENS HD-EV01P-VP-2 1 Channel HD Video & Power Passive Balun (Pair)

SKU
HD-EV01P-VP-2
ENS HD-EV01P-VP-2 1 Channel HD Video & Power Passive Balun (Pair) HD-EV01P-VP-2 by ENS
ENS HD-EV01P-VP-2 1 Channel HD Video & Power Passive Balun (Pair) HD-EV01P-VP-2 by ENS
Model No
HD-EV01P-VP-2
$16.00
Qty:
Product Highlights
    • 1CH HD Video & Power Transmitter & Receiver (12V/24V DC/AC)
    • Real-time transmission over UTP cat5e/6
    • NTSC, PAL & SECAM video format compatible
    • Compatible with all HD-TVI, HD-CVI, AHD & CVBS analog cameras
    • Male BNC with extended 5.9inch (150mm)mini-coax pigtail

The HD-EV01P-VP-2 from ENS is a 1 Channel HD Video & Power Passive Balun (Receiver & Transmitter). The HD-EV01P-VP-2 is video & power transmitter and receiver that allows the transmission of real-time CCTV HD video and power signal via cost-effective unshielded Twisted Paired (UTP) cable. Baseband (composite) signals of any type are supported. The HD-EV01P-VP-2 is compatible with all HD-TVI, HD-CVI and AHD analog camera. Used in pairs, HD-EV01P-VP-2 eliminates costly and bulky coaxial cable. The superior interference rejection and low emissions of the HD-EV01P-VP-2 allow video & power signals to coexist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. The HD-EV01P-VP-2 is built-in surge suppressor to protect video equipment against damaging voltage spikes. Its crosstalk and noise immunity ensure quality video signals.

The HD-EV01P-VP-2 is recommended to use with Unshielded Twisted Paired (UTP) wiring from 24AWG through 22AWG. Individually shielded pairs should be avoided, as they reduce the operating range of the systems drastically. Multi-pair cable (25-pair or more) with an overall shield are acceptable. Video signals can coexist in the same wire bundle as telephone, datacom, or low-voltages power circuits. While video may be routed through telephone punch-down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices must be removed from the pair.

Features

  • 1CH HD Video & Power Transmitter & Receiver (12V/24V DC/AC)
  • Real-time transmission over UTP cat5e/6
  • NTSC, PAL & SECAM video format compatible
  • Compatible with all HD-TVI, HD-CVI, AHD & CVBS analog cameras
  • Color video max up to 440m (1443ft) for HD-CVI 720P camera If you adjust saturation of DVR, max up to 470m (1541ft)
    - Color video max up to 230m (754ft) for HD-CVI 1080P camera
  • Color video max up to 190m (623ft) for Hikvision TVI 720P camera
    - Color video max up to 190m (623ft) for Hikvision TVI 1080P camera
  • Color video max up to 230m (754ft) for TVT HD-TVI 720P camera
    - Color video max up to 220m (721ft) for TVT HD-TVI 1080P camera
  • Color video max up to 320m (1049ft) for AHD 720P camera
    - Color video max up to 320m (1049ft) for AHD 960P camera
    - Color video max up to 250m (820ft) for AHD 1080P camera
  • Color video max up to 400m (1312ft) for CVBS camera
  • Male BNC with extended 5.9inch (150mm)mini-coax pigtail
  • RJ45 Jack for UTP cable
  • Built-in TVS (Transient Voltage Suppressor) for surge protection
  • Wave Filter Design, Anti-Static Design
  • Lightning protection design Grade: III
  • 60 dB crosstalk and noise immunity
  • Exceptional interference rejection
  • ABS engineering plastic housing
SKU  HD-EV01P-VP-2
Manufacturer  ENS
Integral Camera Power  With Power
Channels  1
Connection Type  BNC, RJ-45
Form  Stand-Alone
There are no related videos.
SKU
HD-EV01P-VP-2
Availability: In stock