Comnet FVTR1A2D1C1M1B Bi-directional Video Receiver + 2 Bi-directional Audio Channels + Bi-directional Data + Bi-directional Contact Transceiver, mm, 1 Fiber

SKU
FVTR1A2D1C1M1B
Comnet FVTR1A2D1C1M1B Bi-directional Video Receiver + 2 Bi-directional Audio Channels + Bi-directional Data + Bi-directional Contact Transceiver, mm, 1 Fiber FVTR1A2D1C1M1B by Comnet
Comnet FVTR1A2D1C1M1B Bi-directional Video Receiver + 2 Bi-directional Audio Channels + Bi-directional Data + Bi-directional Contact Transceiver, mm, 1 Fiber FVTR1A2D1C1M1B by Comnet
Model No
FVTR1A2D1C1M1B
$1,446.76
Qty:
Product Highlights
    • 10-bit digitally encoded bi-directional video transmission or video sync plus one bi-directional data channel, two bi-directional audio channels and one bi-directional contact closure
    • 24-Bit 96kHz Digitally Encoded Transmission
    • 20Hz - 18kHz Audio Bandwidth
    • 600 Ohms Audio Input Impedance
    • Exceeds all requirements for RS-250C short-haul transmission: True broadcast video performance

The ComNetâ„¢ FVTR1A2D1C1M1B transceivers support simultaneous transmission of short-haul quality 10-bit bi-directional digitally encoded video plus one bi-directional data channel, two channels of bi-directional audio and contact closure over one multimode optical fiber. The module is universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces, and most major data protocols. The modules use 24-bit 96kHz sample rate digital encoding for superior transmission of balanced line-level audio. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. These units are interchangeable between stand-alone or card mount configurations.

Features

  • 10-bit digitally encoded bi-directional video transmission or video sync plus one bi-directional data channel, two bi-directional audio channels and one bi-directional contact closure
  • 24-Bit 96kHz Digitally Encoded Transmission
  • 20Hz - 18kHz Audio Bandwidth
  • 600 Ohms Audio Input Impedance
  • Exceeds all requirements for RS-250C short-haul transmission: True broadcast video performance
  • Supports RS232, RS422 or RS485 (2 or 4-wire) data interfaces
  • Compatible with all NTSC, PAL, or SECAM CCTV camera systems
  • Transmits Balanced Line-Level Audio up to +6dBm
  • Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
  • Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
  • Automatic resettable fuses on all power lines
  • Hot-swappable rack modules
  • Interchangeable between stand-alone or rack mount use – ComFit
  • Distances up to 30 miles (48 km)
  • Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
SKU  FVTR1A2D1C1M1B
Manufacturer  Comnet
Fiber Optic Transmission use  Serial Data, Video
Channels  2 Channel
Connection Type  ST
Format  Multi-Mode
Mounting Options  Rack Mount, Surface Mount
There are no related videos.
Downloads & Manuals
SKU
FVTR1A2D1C1M1B
Availability: In stock