Comnet FVT110S1-BO Single Mode Video Transmitter / Data Transceiver

SKU
FVT110S1-BO
Model No
FVT110S1-BO
$1,271.83
Qty:
Product Highlights
    • Supports Panasonic Proteus, Pelco Coaxitron and Bosch Bilinx Up-the-Coax systems
    • 1 Full Duplex Data channel
    • 1 Full Duplex Contact Closure
    • Distances up to 30 miles (48 km)
    • Exceeds all requirements for RS-250C short-haul transmission: True broadcast video performance

The FVT110S1-BO from Comnet is a single mode video transmitter / data transceiver. The ComNet FVT110 series is a video transmitter/receiver and data transceiver that supports the simultaneous transmission of short haul quality 10-bit EIA RS-250C digitally encoded video and bi-directional data over one multimode or single mode optical fiber. The module is universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces and most data protocols. It also supports “up-the-coax” data transmission from all major manufacturers, utilizing time-base correction these units can achieve distances of 48km. The FVT/FVR110 supports Panasonic Proteus, Pelco Coaxitron and Bosch Bilinx Up-the-Coax systems. The FVT110 also transmits a single bi-directional contact closure signal. Packaged in the exclusive ComNet ComFit housing, the full-size units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.

Features

  • Supports Panasonic Proteus, Pelco Coaxitron and Bosch Bilinx Up-the-Coax systems
  • 1 Full Duplex Data channel
  • 1 Full Duplex Contact Closure
  • Distances up to 30 miles (48 km)
  • Exceeds all requirements for RS-250C short-haul transmission: True broadcast video performance
  • Time-Based Corrected Up-the-Coax Data
  • Compatible with all NTSC, PAL, or SECAM CCTV camera systems
  • Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
  • Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events
  • Automatic resettable fuses on all power lines
  • Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
  • FVT/FVR110(M,S)1 is a hot-swappable rack module
  • FVT/FVR110(M,S)1 is interchangeable between standalone or rack mount use – ComFit
SKU  FVT110S1-BO
Manufacturer  Comnet
Fiber Optic Transmission use  Data, Video
Channels  1 Channel
Connection Type  ST
Format  Single Mode
Mounting Options  Rack Mount, Stand Alone
There are no related videos.
SKU
FVT110S1-BO
Availability: In stock