Comnet CNFE1RPT/PD/M 10/100 Mbps Ethernet Repeater With 60 W Pass-Through PoE

SKU
CNFE1RPT/PD/M
Comnet CNFE1RPT/PD/M 10/100 Mbps Ethernet Repeater With 60 W Pass-Through PoE CNFE1RPT/PD/M by Comnet
Comnet CNFE1RPT/PD/M 10/100 Mbps Ethernet Repeater With 60 W Pass-Through PoE CNFE1RPT/PD/M by Comnet
Model No
CNFE1RPT/PD/M
$247.48
Qty:
Product Highlights
    • Extends 10/100 Mbps Ethernet and PoE by 328 ft (100 m)
    • Extended temperature operation from -40°C to +75°C
    • Pass-through PoE meets the IEEE 802.3af/at standards for Power over Ethernet
    • Powered by PoE (no local power required)
    • Supports PoE++ 60 W pass-through Power over Ethernet

The Comnet is an Ethernet repeater supporting up to 60 watts of Passthrough PoE, providing a simple and cost-effective way to extend Ethernet signals beyond the standard Ethernet 328 foot (100 meter) limit. It can be used to double the distance to 656 feet (200 meters) or multiple units can be combined in series with each unit providing an additional 328 feet (100 meters). The powered by pass-through PoE from a PoE switch or midspan injector, requiring no local power. Low power consumption ensures that maximum power is made available to the remote PD device. Available in standard configuration, which passes through the PoE to the next device, or as a /PD model, which acts as the final PoE unit in the chain and does not pass through the PoE, providing maximum flexibility for all design scenarios. The compact tube design allows for direct installation within conduit or other small enclosures. A mini size unit is also available for surface mounting, or DIN rail mounting with use of the sold-separately DINBKT4 adaptor.

Features

  • Extends 10/100 Mbps Ethernet and PoE by 328 ft (100 m)
  • Extended temperature operation from -40°C to +75°C
  • Pass-through PoE meets the IEEE 802.3af/at standards for Power over Ethernet
  • Powered by PoE (no local power required)
  • Supports PoE++ 60 W pass-through Power over Ethernet
  • Full unrestricted 10/100 Mbps Bandwidth
  • “Plug & Play” design requires no configuration
  • Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
  • LED status indicators confirm operating status
  • Designed and manufactured in the USA
  • Available in compact tube or small-size form factors
SKU  CNFE1RPT/PD/M
Manufacturer  Comnet
There are no related videos.
Downloads & Manuals
SKU
CNFE1RPT/PD/M
Availability: In stock