Tools
- $174.78SKU: BITASST1
Eclipse Tools BITASST1 Power Bit Rack Assembly incl Rack, Header Card and Bits
- Power Bit Rack Assembly incl rack
- Header card and bits
$174.78Low Price Guarantee - $172.30SKU: 902-582
Eclipse Tools 902-582 4" Standard Style Punch Die For Use Only with 902-545
- 4" Standard Style Punch Die For Use Only with 902-545
$172.30Low Price Guarantee - $168.50SKU: WP-S45-C100
West Penn S45-C100 Heavy Duty Crimp Tool for Simply45 Pass Through Connectors
- Heavy Duty Crimp Tool for Simply45 Pass Through Connectors
$168.50Low Price Guarantee - $165.99SKU: 200-033
Eclipse Tools 200-033 Stationary Blade for 600-006
- Replacement Blade for 600-006 Cable Cutter - Stationary Blade
$165.99Low Price Guarantee - $165.37SKU: TL-3650
West Penn TL-3650 ADJ Impact Punch Down Tool
- Adjustable Impact Punch down Tools
- RJ45 Jack Impact Tool
$165.37Low Price Guarantee - $165.00$165.00Low Price Guarantee
- was $200.00 Special Price $165.00SKU: RLS-LAT
Optex RLS-LAT Laser Alignment Tool for RLS-1010L
- Enables visualization of the detection area, ensuring the RLS-1010L sensor is correctly positioned
- Simplifies setup, reducing installation time and minimizing errors
- Helps avoid misalignment issues that could lead to false alarms or reduced coverage
- Essential for initial installations of REDSCAN Lite units
- Tool does not include the laser pointer; it must be purchased separately
was $200.00 Special Price $165.00Low Price Guarantee - $159.76$159.76Low Price Guarantee
- $156.31$156.31Low Price Guarantee
- $152.81SKU: SD-T635-510
Eclipse Tools SD-T635-510 Adjustable Torque Screwdriver 5.0 - 10 N-m
- Drive: 1/4"/6.3mm Hexagon
- Unit: N-m/lbf.in Dual units
- Torque Range: 5.0~10 Nm
- Accuracy: +/-6.0 %
- Graduation: 0.1 N-m/lbf.in
$152.81Low Price Guarantee - $142.95SKU: WP-CPSNSCT-596
West Penn CPSNSCT-596 Installation Tool ProSNS Snap-n-Seal
- Provides consistent results on every installation
- Plier-type tool with riveted construction
- No adapter tips required
- When you release the handle lock, it activates the built–in handle spring mechanism, opening the tool jaws
- Support plate centers the connectors
$142.95Low Price Guarantee - $142.35SKU: SS-256EU
Eclipse Tools SS-256EU LCD Smart Soldering Station - 60W
- Microprocessor controlled
- Large LCD display with shuffle knob design
- Alumina ceramic heating element, fast heat recovery
- 3 data memories, save commonly used temperatures
- USB 5V/1A power output
$142.35Low Price Guarantee - $139.00SKU: SD-T635-16
Eclipse Tools SD-T635-16 Adjustable Torque Screwdriver 1.0 - 6.0 N-m
- Drive: 1/4"/6.3mm Hexagon
- Unit: N-m/lbf.in Dual units
- Torque Range: 1.0~6.0 N-m
- Accuracy: +/-6.0 %
- Graduation: 0.1 N-m/lbf.in
$139.00Low Price Guarantee - $136.99SKU: HW-V710
Eclipse Tools HW-V710 VDE 1000V Insulated 1/2" Drive Reverse Flat Ratchet Handle - 9"
- Square drive 1/2", Teeth 36, OAL 9.8"
- Reversible for clockwise and anti-clockwise directions
- Extremely smooth action
- Quick, easy and reliable locking of attached sockets
- Chrome vanadium steel, forged, oil-hardened
$136.99Low Price Guarantee - $136.85SKU: HW-T21-40200
Eclipse Tools HW-T21-40200 1/2" Drive Adjustable Torque Wrench with Reversible Ratchet
- Drive: 1/2"/12.7mm Square
- Unit: N-m/lbf.in Dual units
- Torque Range: 40~200 N-m/ 33~144 lb. Ft
- Accuracy: +/-3.0 %
- Graduation: 1.0 N-m
$136.85Low Price Guarantee - $136.31SKU: HW-T21-60340
Eclipse Tools HW-T21-60340 1/2" Drive Adjustable Torque Wrench with Reversible Ratchet
- Drive: 1/2"/12.7mm Square
- Unit: N-m/lbf.in Dual units
- Torque Range: 60~340 N-m/ 52~243 lb. Ft
- Accuracy: +/-3.0 %
- Graduation: 2.0 N-m
$136.31Low Price Guarantee - $134.95SKU: 200-006
Eclipse Tools 200-006 Heavy Duty Cable Cutter
- 500 MCM copper and equivalent diameter Aluminum
- Low carbon steel body
- Alloy steel blade
- Body hardness: HR 30N 55°~70°
- Cutting edge: HRC 45°±3°
$134.95Low Price Guarantee - $132.00SKU: LS-63-516
LSDI LS-63-516 5/16” Base-Boar-Zit Kit
- Creates access from below carpet line up into wall.
- The Base-Boar-Zit the standard 5/16″
- Size is shipped as a kit that includes the cable bit with frame, a 10' thin fish wire in a storage case.
$132.00Low Price Guarantee - $131.95SKU: CP-383
Eclipse Tools CP-383 Cable Tie Fastening Tool - Nylon Ties
- Thickness up to 1.3mm
- Width up to 4.6mm
- Nylon and Vinyl Ties Only - Not for Steel
$131.95Low Price Guarantee - $131.90SKU: UC-8012
ENS UC-8012 Crimper for Use with RG-59/RG-6 CATV "F" Connectors
- Works with Corning Gilbert and Belden Connectors
- Ratcheting handle makes it easy to use with a low amount of hand force, even to the last click
- Ergonomically designed angled head lessens the need to uncomfortably bend your wrist while working
- Die changes are quick and easy to perform
- Built-in safety release allows the ratchet to unlock if it ever gets stuck
$131.90Low Price Guarantee
Filter
Shopping Options
