Thinkware Speco Computar LSDI Tools
Filter
- $68.04SKU: LS-54-105
LSDI LS-54-105 P-1 Portasol Soldering Kit
- Assorted spare tips
- Flint ignition
- 60 minute run time
- Anti Static ESD Safe
- Ready to melt solder less than 30 seconds from ignition
$68.04Low Price Guarantee - $1,447.99SKU: LS-80-610
LSDI LS-80-610 RoyRodsTM All-Tool-Mate Master Tool Kit (USA Only)
- LS-81-700 RoyRodsTM Pro 36″
- LS-81-709 RoyRodsTM Drag-Zit Magnet
- LS-81-706 Z-Tip Quick Connect Tip
- LS-81-707 J-Tip Quick Connect Tip
- LS-81-708 RoyRodsTM Female/Bullnose
$1,447.99Low Price Guarantee - $1,171.00SKU: LS-80-600
LSDI LS-80-600 All-Tool-Mate Master Threaded Tool Kit (USA Only)
- LS-81-000 Creep-Zit Pro 36″
- LS-81-360 Creep-Zit Drag-Zit Magnet
- LS-82-350 Z-Tip Push/Pull Tip
- LS-82-370 J-Tip Hook
- LS-81-300 Creep-Zit Replacement Threaded
$1,171.00Low Price Guarantee - $179.14$179.14Low Price Guarantee
- $175.00SKU: LS-56-115
LSDI LS-56-115 12” Double Blade Hole Cutter
- For cutting round holes in ceilings, walls and floors
- Cuts veneer, plywood, sheet rock (gypsum board), f iberglass, fiber cement board, plaster, stucco, etc.
- Can be used with either hand drill or pillar drill
- Maximum cutting depth: 2″ (50 mm)
- Maximum cutting diameter: 12″ (305 mm)
$175.00Low Price Guarantee - $143.00SKU: LS-81-000
LSDI LS-81-000 Creep-ZitTM Pro 36 Ft Threaded Connector Wire Running Rod Kit
- Five FiberFuseTM 6 ft. push/pull rods with
- Male and female threaded connector ends
- One luminous (glows in the dark) FiberFuseTM 6 ft. push/pull rod with male and female threaded connector ends
- One threaded connector 6 ft. Fish-TailzTM 1/8″ diameter mesh pull sock
- Luminous whisk threaded connector tip
$143.00Low Price Guarantee - $113.05SKU: LS-56-015
LSDI LS-56-015 10” Double Blade Hole Cutter
- Adjust to desired width and depth
- Attach to drill Pilot Drill Bit Blades Durable case included: 13″ x 14″ DESCRIPTION 10″ Double Blade Hole Cutter Replacement Blades for 10″ Hole Cutter
- Remove safety caps from blades and pilot bit
- Always wear safety glasses when using product
- Verify that there are no electrical components behind the surface to be drilled
$113.05Low Price Guarantee - $105.00SKU: LS-62-368
LSDI LS-62-368 3/4” ReBore-Zit (3/8” Pilot Size)
- The bit is fabricated with a hollow bodied drill bit containing a free spinning, swivel eyelet mounted to its pilot hole center shaft.
- The bit will not twist the wire.
- ReBore-Zit bit to accommodate the preexisting hole
- step-up in ReBore-Zit sizes until you obtain your desired final hole size.
- The ReBore-Zit the Standard 3/4″
$105.00Low Price Guarantee - $66.34SKU: LS-62-348
LSDI LS-62-348 1/2” ReBore-Zit (3/8” Pilot Size)
- The bit is fabricated with a hollow bodied drill bit containing a free spinning, swivel eyelet mounted to its pilot hole center shaft.
- The bit will not twist the wire.
- ReBore-Zit bit to accommodate the preexisting hole
- step-up in ReBore-Zit sizes until you obtain your desired final hole size.
- The ReBore-Zit the Standard 1/2″
$66.34Low Price Guarantee
