Questions? Feedback? powered by Olark live chat software
 
 

Welcome

Chat Support
Toll Free800.955.5201
Free shipping on all purchases over $500
SHOP NEW REFURBISHED
Set Descending Direction

Items 101 - 120 of 289
checkprodtFromhere
  1. Bosch SOLO200 Detector Removal Tool
    Add to Compare
    Price: $466.23
    Add to Wishlist

      • Suitable for a wide range of detector sizes
      • Adjustable color-coded grips rotate to fit different sized detectors
      • Universal joint ensures tool remains parallel with ceiling
  2. Bosch D5060 Multiplex Programmer
    Add to Compare
    Price: $120.13
    Add to Wishlist

      • Programs multiplex bus points on G Series Control Panels or programs a D8125MUX Multiplex Bus Interface
  3. Bosch D379 Swivel Base Mounting Drill Fixture
    Add to Compare
    Price: $166.76
    Add to Wishlist

      • Fixture for locating and drilling a through hole for mounting a magnetic door holder on a door
  4. Bosch D378 Extension Rod Wrench Kit
    Add to Compare
    Price: $7.24
    Add to Wishlist

      • Wrench kit for installing extension rods and door holders
  5. Byte Brothers TSBK-001 31 Piece Security Bit Kit
    Add to Compare
    Price: $23.50
    Add to Wishlist

      • High Grade Metal Component Construction
      • Bit Loads are Fully Customizable
      • Contains: Phillips Tamper: #2 #3
      • Torx Tamper: 5, 6, 7, 8, 9, 10, 15, 20, 25, 27, 30, 40
      • Hex Tamper: 5/64″, 3/32″, 7/64″, 1/8″, 9/64″, 5/32″, 3/16″, 7/32″, 1/4″, 5/16″
  6. Byte Brothers TBK-001 31 Piece Standard Bit Kit
    Add to Compare
    Price: $14.99
    Add to Wishlist

      • High Grade Metal Component Construction
      • 31 Piece Industrial Grade bits
      • Contains: Phillips, Slotted, Torx, Hex, and Square bits
      • Magnetic Bit Tips
      • Bit Loads are Fully Customizable
  7. Byte Brothers TT-260 Long-Reach ‘Double-X’ Long-Nose Pliers 14-Inch
    Add to Compare
    Price: $12.97
    Add to Wishlist

      • Serrated jaws can easily grip small objects
      • Extended reach and narrow
      • Profile allow access to hard to reach areas
      • Twin X joint allows access with minimal handle movement
      • Corrosion resistant
  8. Byte Brothers TT-244 SupreStrip Precision Wire Stripper
    Add to Compare
    Price: $7.99
    Add to Wishlist

      • Strips solid and stranded wire sizes 20-30 AWG
      • Built-in wire cutter
      • Built-in bolt cutter 6-32
      • Comfortable and lockable ErgoTex handles increase efficiency and reduce hand fatigue
      • Integrated serrated jaw pliers
  9. Platinum Tools 15015-20J CAT5/6 Cable Jacket Stripper, Counter Jar, 20-Pieces
    Add to Compare
    Price: $203.06
    Add to Wishlist

      • Designed for stripping the cable jacket on Category 5, 5e and 6+ cables
      • No adjustments required
      • Will not nick inner conductor
      • Comes in a counter display jar containing 20 pieces
  10. Byte Brothers LVPRO-PROBE LVPro Lighted Probe
    Add to Compare
    Price: $70.97
    Add to Wishlist

      • Compatible with Low Voltage Pro 1/2/3
      • Insulated Tip with LED Illuminator
      • 60Hz Present Safety LED
      • LED Tone Indicator
  11. ICC ICACSPDTEH Handheld EZ/HD Termination Tool
    Add to Compare
    Price: $35.96
    Add to Wishlist

      • Terminates 4 pairs of UTP cable in one squeeze
      • Cuts off excess wire and insulation for clean termination
      • Works with ICC EZ and HD style modular voice and data connectors
      • Space-saving and economical design
      • Ergonomic grip for effortless application
  12. ICC ICACSPDT4P 4-Pair Punchdown Tool
    Add to Compare
    Price: $64.04
    Add to Wishlist

      • Designed to provide a maximum of 50kgs impact in order to terminate 4-pairs of wires simultaneously making installations faster and easier
      • Tip of the shaft engages the blade set elliminating the possibility of blade missallignment
      • Ergonomic design allowing a comfortable fit throughout installations
      • Anti-slip rubber with raised grip design preventing hand slippage during use
      • Cushioned rubber handle helps absorb impact to the hand
  13. ICC ICACSPDT05 5-Pair 110 Punch-Down Tool
    Add to Compare
    Price: $67.12
    Add to Wishlist

      • Designed to provide a maximum of 80 Kgs impact in order to properly seat the connecting blocks onto the wiring blocks and to terminate 5-Pairs of wires simultaneously making installations faster and easier
      • Reversible blade gives installers the flexibility to reverse and hide the cutting edge, permitting the tool to be used for seating connecting blocks without trimming wires
      • Tip of the shaft engages the blade set eliminating the possibility of blade misalignment
      • Ergonomic design allowing a confortable fit throughout installations
      • Anti-slip rubber with raised grip design preventing hand slippage during use
  14. ICC ICACSPDT00 110 and 66 Single Blade Punch-Down Tool
    Add to Compare
    Price: $30.70
    Add to Wishlist

      • Designed for both 110 and 66 single-wire termination with both blades included
      • Ergonomic design for fast, comfortable, and reliable termination
      • High and low impact settings allowing more flexibility during punch down operations
      • Low impact setting allows punching down wiring blocks and 110 patch plugs, modules, faceplates, and patch panels with IDC termination, and high impact setting is used when seating 110 connecting blocks into 110 wiring blocks
      • Instructions included
  15. ICC ICACSF06RT 6" F Connector Install/Removal Tool
    Add to Compare
    Price: $10.30
    Add to Wishlist

      • High quality carbon steel material that allows for durability and strength
      • Convenient for installing and removing F-connectors from hard to reach locations
      • Comfortable handle ergonomically designed for ease of use
      • Works with ICC F-type connectors; RG59, RG6, RG6Q
  16. ICC ICACSCTRST Wire Cutter and Wire Stripper Tool
    Add to Compare
    Price: $7.74
    Add to Wishlist

      • Manufactured with high quality steel material
      • Ergonomic design provides a firm and comfortable grip with prevents slippage
      • Integrated cutter helps eliminate the need for additional tools
      • Strips from 12 AWG to 24 AWG stranded wire
      • Strips from 10 AWG to 22 AWG solid wire
  17. ICC ICACSCT864 Crimps 4, 6 and 8 Position Plugs
    Add to Compare
    Price: $22.42
    Add to Wishlist

      • Designed with ratchet mechanism providing a complete crimp prior to releasing the plug
      • Ergonomic design providing a firm comfortable grip and preventing slippage during crimping
      • Steel frame constuctions for added strength and durability
      • Includes cable cutter / stripping feature
      • Ideal for crimping 4, 6 and 8-Position telephone plugs
  18. ICC ICACSCT845 Professional Grade Crimping, Stripping and Cutting Tool
    Add to Compare
    Price: $23.28
    Add to Wishlist

      • Ergonomic design provides a firm and comfortable grip which prevents slippage during crimping, cutting and stripping cable
      • Lightweight, durable, and compact
      • Ideal for crimping 8P8C/RJ-45 telephone and data plugs
      • Used with ICC 8P8C modualr telephone plugs
  19. ICC ICACSCT01U Universal Compression Tool
    Add to Compare
    Price: $50.65
    Add to Wishlist

      • Ergonomic design providing a firm comfortable grip and preventing slippage during compression
      • Steel frame constructions for added strength and durability
      • Handles all water sealed and standard F-type, RCA, BNC, right angled BNC compression connectors, and keystone compression modules
      • Suitable for use with RG59, RG6, and RG6 quad cables
      • Used with all ICC F-type, RCA, and BNC connectors; F-type and RCA compression modular connectors
  20. ICC ICACSCT01E Economic Compression Tool
    Add to Compare
    Price: $19.58
    Add to Wishlist

      • Ergonomic design providing a firm comfortable grip and preventing slippage during compression
      • Steel frame constructions for added strength and durability
      • Handles all standard F-type compression connectors
      • Suitable for use with RG59, RG6, and RG6 quad cables
      • Used with all ICC F-type connectors

See any errors on this page? Let us know.

Set Descending Direction

Items 101 - 120 of 289
checkprodttohere

Home page footer ads banner