Napco PIR1680PT Motion Sensor w/Temp Alert

The PIR1680PT supports 65lb. (29kg) pet protection within its 45’ (13.7m) range. Or, Outstanding false alarm rejection in both models is made possible with their An advanced microprocessor that has been embedded with a library of valid and false alarm signal signatures—enabling the PIR to differentiate intruders from animals and other traditional false alarm sources. In addition to proven intruder-detection circuitry, these units also feature a built-in temperature sensor – at no additional charge—so you can provide traditional security, as well as climate security from heat and/or freeze damages, when HVAC systems fail, before pipes burst or décor, pets or perishables are ravaged by heat extremes, otherwise left unchecked.

Features

• Microprocessor: 2K ROM with A-D Converter
• Operating temperature*: -10 to +50 degrees C (14° to 122° F)
• Freeze damage alert: 40°F (4°C)
• Heat damage alert: 90°F (32°C)
• Mounting: Wall or corner, 12' (3.6m) max.; For pet/animal applications 7' (2.1m) is recommended
• Output relay: Form A; normally closed
• Relay time: Approx. 3 seconds
• Alarm Relay: 100mA, 24Vdc with internal 10 ohm current limiting resistor
• Multi-mode Trouble Output (Open collector)
• Self-Test Interval: 11 - 16 hrs
• Power supply requirements: Filtered 10.6 to 16VDC nominal with battery backup form the control panel
• Current drain: 28mA (idle/alarm) at 12VDC (nominal)