Power
- $1,202.00SKU: T2KE33F16DV
Altronix T2KE33F16DV 16-Door Altronix/Kisi Access and Power Integration Kit
- Voltage: 220VAC (working range 198VAC - 256VAC), 50/60Hz, 2.5A
- Type: Sealed lead acid or gel type
- EOL: 10K Resistor
- AC Failure: Form ″C″ contacts
- Eight (8) 24VDC independently controlled PTC outputs:
$1,202.00Low Price Guarantee - was $1,050.00 Special Price $1,040.00SKU: T2KSK3F8
Altronix T2KSK3F8 8-Door Access and Power Integration Kit Includes Trove2KS2 with eFlow6NB, ACMS8, VR6, PDS8
- 24VDC power supply/charger
- Accommodates up to four (4) Keri Systems NXT-2D-MSCNE, NXT-4D-MSCNE or up to three (3) NXT-4X4NE boards
- 16 AWG galvanized steel backplane simplifies board layout and wire management
- CE European Conformity
- Enclosure accommodates up to four (4) 12VDC/12AH batteries
was $1,050.00 Special Price $1,040.00Low Price Guarantee - $880.00SKU: PWR-16AC-32A
ICRealtime PWR-16AC-32A 16 Channel 24V AC @ 32 amp UL Listed Power Distribution Box
- UL listed
- Unit maintains camera synchronization
- AC/DC power LCD indicator
- Input fuse is rated at 3.5 amp
- 115 VAC 50/60 Hz 1.45 amp input
$880.00Low Price Guarantee - $621.44SKU: T1VK3F4
Altronix T1VK3F4 4-Door Access and Power Integration Kit Includes Trove1V1 with eFlow6NB, VR6, PDS8
- 12 or 24VDC power supply/charger
- Accommodates up to two (2) VertX V100, V200, V300, V1000, V2000 modules
- 16 AWG galvanized steel backplane simplifies board layout and wire management
- CE European Conformity
- Enclosure accommodates up to two (2) 12VDC/7AH batteries
$621.44Low Price Guarantee - $195.99SKU: BC-MX5102
Linear BC-MX5102 Replacement Battery Pack (1) MX5102
- Battery Backup
- 600VA UPS, 2 Outlets
- Clean Power Level 3
$195.99Low Price Guarantee - $187.12SKU: RI-16
ETS RI-16 Sixteen Channel Universal Relay Board
- Accepts Voltages from 5 to 24VAC or 5 to 24VDC
- LED indicators for each channel
- Each input contains a rectifier / Voltage regulator for constant Voltage across relay coil regardless of input Voltage
- 40ma current consumption per channel max
- 1 Amp relay output contact current rating @ 48VDC
$187.12Low Price Guarantee - $111.78SKU: POE1AT-EU
Pelco POE1AT-EU Single Port PoE+ Midspan with European Power Cord
- Fully 802.3at Compliant Detection, Disconnect, Over Voltage, and Current Protection
- 30 W Output
- Diagnostic LEDs
- Gigabit Compatibility
- Nonvented Case
$111.78Low Price Guarantee - $83.16SKU: AP-GIC-010A-030
Vivotek AP-GIC-010A-030 Indoor 1xGE IEEE 802.3at PoE Injector
- Over Current Protection Supported
- PoE PD Auto Detection Supported
- Gigabit Ethernet (RJ45) 1
- Video Resolution Megapixel/D1/VGA
- Circuit Shorting Protection Supported
$83.16Low Price Guarantee - $82.63SKU: CTPSW-24VAH10A-4P3
Cantek Plus CTPSW-24VAH10A-4P3 4 Channel / 10 Amp Power Distribution Box, AC 24V
- AC100 ~ 240V (50/60Hz) Input Voltage
- AC 24V, 10A Output Voltage
- PTC3A (Resettable) Fuse Type
$82.63Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.
Filter
Shopping Options
