Power
- $838.00SKU: UPS-CR1K
ENS UPS-CR1K Uninterruptible Power Supply, 1KVA/800W, Rack Mounting
- Rack-mount format: integrates the UPS directly into the security equipment rack alongside the NVR and PoE switch — eliminating the floor-standing UPS tower and its associated cabling from the equipment room floor
- 1KVA/800W capacity: sufficient for a typical small-to-medium security rack including a 16-channel NVR (40W), a PoE switch (100W), and additional accessories — providing approximately 10–20 minutes of battery backup at full load
- AVR corrects undervoltage and overvoltage without battery switching, extending battery service life and protecting sensitive NVR and switch electronics from power quality issues
$838.00Low Price Guarantee - $550.00SKU: UPS-1K9A
ENS UPS-1K9A Uninterruptible Power Supply, 1000VA/1000W 3 Outlets
- 1000VA/1000W line-interactive UPS; unity power factor (1.0 PF); 3 AC outlet outputs; AVR (Automatic Voltage Regulation); surge protection; sealed lead-acid battery
- Unity power factor: 1000VA = 1000W at 1.0 PF — the full capacity is available as real power, unlike 0.9 or 0.8 PF UPS systems where the same VA rating delivers only 900W or 800W; correct for NVRs, servers, and active PFC equipment loads
- 3 AC outlets: powers NVR, PoE switch, and router/modem simultaneously from a single UPS; AVR corrects voltage sags and surges without switching to battery, extending battery life and protecting equipment from sub-outage voltage events
$550.00Low Price Guarantee - $1,074.00SKU: SGA-AIR2000K
ENS SGA-AIR2000K Surveillance Power Enclosure, 2 110V 5A Output Socket
- External can be installed PTZ IPC, DOME IPC Bullet IPC And IP Speaker
- The interior can be placed NVR, 4G Router, POE switch…
- The AC power supply input line is configured(MAX 110V 1.5KW)
- Built-in 2Pcs power output socket (Each socket has a maximum load of 110V 550W)
- 5 port DC power output (Total output power of 255W)
$1,074.00Low Price Guarantee - $934.00SKU: SGA-AIR1000K
ENS SGA-AIR1000K Surveillance Power Enclosure, 3 110V 5A Output Socket
- Quick and Easy Installation for Dome, Bullet, PTZ, and IP Speaker
- The Interior of The Box Can Accommodate An NVR, 4G Router, and PoE Switch
- The AC Power Supply Input Line Is Configured At MAX 110V 16A
- Built-In 3Pcs Power Output Socket
- Built-in 6KV Lightning Protection Device
$934.00Low Price Guarantee - $310.00SKU: CP360W-POE8P-B
ENS CP360W-POE8P-B Access Control, CCTV, Battery Charger All In One Power Box
- 8 × PoE ports power IP cameras and network devices simultaneously over Cat5/6; 8 × 12V DC outputs power door locks, electric strikes, magnetic locks, alarm panels, and other 12V DC access control hardware
- Integrated battery charger: connects to a 12V backup battery (sold separately) to maintain battery charge for uninterrupted operation during power outages — providing UPS-like battery backup for all connected devices without a separate UPS unit
- Single-box consolidation eliminates wiring complexity — all access control and CCTV power connections terminate to one location, simplifying installation, troubleshooting, and service; lockable steel box protects power circuitry from unauthorized access
$310.00Low Price Guarantee - $76.00SKU: CP12-5A-EG
ENS CP12-5A-EG Access Control Power Box, 5A, DC12-15V Adjustable Output
- Support 64/128CH 16MP/12MP/8MP/6MP/5MP/4MP/3MP/1080P/1280x1024/960P/720P/960H/D1/CIF IP input
- H.265S/H.265+/H.265/H.264 coding
- Intuitive and user-friendly Graphic User Interface ( GUI ), Windows style operation by mouse
- Multi-mode recording: manual / timed / motion / sensor/ POS / AI recording
- Playback: 16 CH simultaneous playback
$76.00Low Price Guarantee - $580.00SKU: SGP-S300W-P-V2
ENS SGP-S300W-P-V2 Sun Guardian Outdoor Power Panel Pro, 2 Pack
- 2-pack of 150W monocrystalline solar panels; total output: 300W; operating voltage: 36V; designed as the solar generation component for the ENS Sun Guardian SGP-V2 outdoor enclosure system
- Sun Guardian Outdoor Power Panel Pro: 150W × 2 panels, 36V configuration; the solar generation component designed to pair with the SGP-V2 outdoor enclosure and SGP-MAX3000P-V2 power system
- Monocrystalline silicon cells provide higher conversion efficiency per square meter than polycrystalline alternatives — maximizing energy harvest from the panel area available on a Sun Guardian pole or structure mount
- 36V panel configuration matches the SGP-V2 enclosure's MPPT charge controller input voltage specification
$580.00Low Price Guarantee - $314.00SKU: SGP-S300W-M-V2
ENS SGP-S300W-M-V2 Sun Guardian Outdoor Power Panel S300W (V2) Mount and Mounting Accessories
- Solar Panel Mounting Bracket
- Constructed from high-strength hot-dip galvanized steel
- Compatible with dual 150W solar panels (total 300W)
- Includes 2 U-shaped clamps
- Rust-resistant with protective spray coating
$314.00Low Price Guarantee - $4,119.00SKU: SGP-MAX3000P-V2
ENS SGP-MAX3000P-V2 Sun Guardian Outdoor Enclosure Pro
- Outdoor Enclosure Pro
- 25.2 V 2.5 kWh Battery
- MPPT
- MPPT gateway included (PoE switch not included)
- 12 V 48 V output
$4,119.00Low Price Guarantee - $1,669.00SKU: SGP-2800
ENS SGP-2800 Sun Guardian Outdoor Enclosure Battery For SGP-V2, 22.2V, 2800Wh
- Lithium battery module; voltage: 22.2V; capacity: 2800Wh (2.8 kWh); designed for the ENS Sun Guardian SGP-V2 outdoor enclosure solar system
- 2800Wh of battery capacity provides substantial energy storage for extended autonomous operation
- The SGP-2800 is the battery module for the SGP-V2 platform
- 22.2V lithium cell configuration matches the SGP-V2 enclosure's charge controller and power management system; do not install in enclosures with different voltage battery architectures
$1,669.00Low Price Guarantee - $4,798.00SKU: SG-GEN-MOD
ENS SG-GEN-MOD Generator Module for SG-008
- Generator integration module for the ENS SG-008 Sun Guardian solar surveillance trailer; provides the power interface and control circuit for connecting a generator as supplemental or backup charging power
- Generator charging capability fills the solar energy gap during extended cloudy periods, nighttime heavy loads, or emergency situations where the SG-008's battery is depleted faster than solar can replenish it
- Extends the SG-008's operational availability to 24/7 regardless of solar conditions when used with a compatible generator — the correct specification for long-term deployments at sites with variable or low solar resource
$4,798.00Low Price Guarantee - $1,150.00SKU: SG-BATTERY
ENS SG-BATTERY Sun Guardian Solar Trailer Max Battery, 200Ah DC12V
- Deep-cycle battery; 12V DC; 200Ah capacity; designed for ENS Sun Guardian solar surveillance trailer systems with 12V DC electrical architecture
- 200Ah capacity at 12V provides substantial energy reserve for off-grid surveillance equipment — sufficient to power typical IP camera and network equipment loads through multiple nights between solar charge cycles, depending on total system draw
- Deep-cycle design
- Replacement battery for Sun Guardian solar trailer systems using 12V DC battery banks
$1,150.00Low Price Guarantee - $3,999.00SKU: SG-8000
ENS SG-8000 Battery for SG-008, 314Ah, 25.6V
- LiFePO4 (lithium iron phosphate) battery; voltage: 25.6V; capacity: 314Ah; approximately 8 kWh of energy storage; OEM replacement battery for the ENS SG-008 Sun Guardian solar surveillance trailer
- LiFePO4 chemistry: superior to lead-acid in energy density, cycle life (2,000–4,000+ cycles vs. 200–500 for lead-acid), depth of discharge (up to 80% vs. 50% for lead-acid), and operating temperature range — the correct chemistry for outdoor solar surveillance trailer applications
- 25.6V (8S LiFePO4) configuration matches the SG-008's electrical system design
$3,999.00Low Price Guarantee - $45,198.00SKU: SG-009
ENS SG-009 Sun Guardian 009 Solar Trailer Max, 3 Panel
- Quick and Easy Installation
- Experience Streaming Quality of Up to 4K Resolution
- SD and Local Storage
- No Requirement for External Wiring or Link-ups
- 4G Cellular Connection
$45,198.00Low Price Guarantee - $33,999.00SKU: SG-008
ENS SG-008 Sun Guardian 008 Solar Trailer Max
- 2-panel design using high-efficiency 440 W monocrystalline silicon panels
- Optimized for maximum performance even in low-sunlight areas
$33,999.00Low Price Guarantee - $80.00SKU: POE-INJECT06
ENS POE-INJECT06 1 Channel POE Injector, 2.5Gbps, White
- 1-channel PoE injector; 2.5 Gbps (2500BASE-T) data pass-through; IEEE 802.3at/bt PoE output; AC power input
- White finish: the standard color for ceiling-mounted and wall-mounted access point installations where a white injector will be less conspicuous in finished spaces
- Midspan injector: connects between a non-PoE switch port and the downstream PoE device, adding IEEE 802.3at/bt PoE power without replacing the switch
- Plug-and-play; auto-negotiates PoE class and link speed with the connected device
$80.00Low Price Guarantee - $56.00SKU: POE-INJECT05
ENS POE-INJECT05 1 Channel PoE Injector, 10/100 Mbps
- 1-channel PoE injector; 10/100 Mbps (Fast Ethernet) data pass-through; IEEE 802.3af PoE (15.4W) output; AC power input from wall outlet
- Midspan injector function: connects between a non-PoE switch port and the downstream PoE device — the injector adds PoE power to the Ethernet cable without affecting data transmission
- 10/100 Mbps (Fast Ethernet) data rate — for Gigabit or 2.5Gbps data pass-through, see the POE-INJECT06; the 10/100 Mbps limitation makes this appropriate for standard IP cameras that do not require Gigabit throughput
- Compact desktop design; plug-and-play; no configuration required; auto-negotiates PoE class with the connected device
$56.00Low Price Guarantee - $178.00SKU: CP1218-30A-U
ENS CP1218-30A-U 12VDC, 18-Channel Power Supply, 30A, PTC Fuse, UL Certified
- 12V DC, 18-channel camera power supply; AC 100–240V input; 50/60Hz; DC 12V ±5% output; 30A total output current; 18 individually PTC fuse-protected channels; UL certified
- Provides greater headroom for high-current camera installations — 8MP cameras with long-range IR, cameras with integral heaters, PTZ cameras, and other accessories that draw more than the average camera's 300–500mA
- Universal AC 100–240V input; 18 output channels in a lockable metal enclosure; suitable for up to 18 cameras at approximately 1.67A per channel average at full 30A load
- UL certified
$178.00Low Price Guarantee - $160.00SKU: CP1218-20A-U
ENS CP1218-20A-U 12VDC, 18-Channel Power Supply, 20A, PTC Fuse, UL Certified
- Input Voltage : AC 100-240V
- Input Voltage Frequency : 50/60Hz
- Output Voltage : DC 12V +/-5%
- Total Output Current : 20A
- Total Outputs : 18 Channel
$160.00Low Price Guarantee - $2,755.00SKU: HV-PWR1200V2-10
Hanwha Vision HV-PWR1200V2-10 Secondary Hot-Swap Power Supply
- 24 ports, with 4 uplinks
- Swappable PSU
- 1480W PoE+/PoE++ power budget with x2 PWR1200V2
- Fully managed
- AW+ OS (CLI, GUI and NetCONF/RESTCONF)
$2,755.00Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.
Filter
Shopping Options
