Power
- $413.00SKU: PS-EXIT
Adams Rite PS-EXIT Power Supply for Exit Devices
- Delivers regulated and filtered clean power for increased performance
- Power and control up to two MLR or LR exit devices in single or dual input operations
- Operating mode: single or double swinging doors
- Exclusively designed for Adams Rite 8000/3000 Exit Devices with MLR or LR option
- Designed to power applications where access control and accessibility is required and high performance is expected
$413.00Low Price Guarantee - $94.08SKU: ST-PBX18/10A-PTC
SecurityTronix ST-PBX18/10A-PTC Camera Power Supply, 18 Outputs, 12VDC, 10A
- 18 Camera outputs
- Input Voltage: 110VAC - 220VAC, 50-60Hz
- Input connector: IEC 3-pin AC Cord
- Output Voltage: 12VDC
- Output Current: 10A
$94.08Low Price Guarantee - $60.06SKU: CTW-12VDC-18P-10A
Cantek CTW-12VDC-18P-10A 18 PTC Output CCTV Distributed Power Supply
- Input 110/120 VAC
- Output 12V DC, 18channels
- 10 Amp Supply Current
- Integral Surge Protection
- Individual LED Power Indication
$60.06Low Price Guarantee - $11.00SKU: ST-UV24-S2-0Q
Seco-Larm ST-UV24-S2-0Q 24VDC Plug-In Switching AC Adapter
- Regulated 2.0A
- Use in a wide variety of applications including CCTV, access control, and security
- Universal 100~240VAC. Regulated 24VDC output
- 4ft (1.2m) cord, 2.1mm plug (postive center)
- Low power consumption
$11.00Low Price Guarantee - $10.46SKU: ST-121A
MG Electronics ST-121A 12VDC 1000MA Power Supply with Screw Terminal Output
- Primary: 100-240VAC 50/60Hz
- Secondary: 12VDC 1000MA
- Two Screw Output Terminals
- Lightweight
- UL, cUL, FCC Listed
$10.46Low Price Guarantee - $2,744.15SKU: SMX2200HV
APC SMX2200HV Smart-UPS X 2200VA Rack/Tower LCD 200-240V
- Provides actual kilowatt hours of usage for energy conscious users
- Reduces or eliminates bulky transformers resulting in lighter units for ease of handling
- Reduces utility costs, generates less heat
- Allows additional run time to be quickly added as needed
- Customize UPS capabilities with management cards
$2,744.15Low Price Guarantee - $233.19SKU: EFLOW104NB
Altronix EFLOW104NB Single Output Power Supply Charger, 24VDC @ 10A, 115VAC, Board
- Input 120VAC 60Hz, 4.5 amp
- 24VDC output
- 10 amp continuous supply current
- Aux. power-limited output rated @ 1 amp (unswitched)
- Over Voltage Protection
$233.19Low Price Guarantee - $611.00SKU: D150X-120-2083Y
Ditek D150X-120-2083Y 150kA Surge Protective Device, 120/208 VAC 3 Phase Wye
- 150,000 Amp surge current rating per phase ensures long service life
- Discrete, all-mode surge protection design maximizes performance
- Diagnostic LEDs indicate system power and SPD function
- Audible Alarm and Dry contacts for remote monitoring of surge protection status
$611.00Low Price Guarantee - $584.33SKU: NETWAY4E1WP
Altronix NETWAY4E1WP 4 Port Hardened PoE Switch with Power Supply/Charger
- Four (4) 10/100/1000 Mbps
- PoE/PoE+ (up to 30W) ports
- IEEE 802.3af (15W) and IEEE 802.3at (30W) compliant
- 120W total power
- Integral surge protection
$584.33Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.
Filter
Shopping Options
