Power
- $2,950.92SKU: SMX3000HVT
APC SMX3000HVT Smart-UPS X 3000VA Short Depth Tower/Rack Convertible LCD 208V
- Gives higher application availability by correcting low and high voltage conditions without using the battery
- Maximizes battery performance, life, and reliability through intelligent, precision charging
- Protects connected loads from surges, spikes, lightning, and other power disturbances
- Prolongs battery life by regulating the charge voltage according to battery temperature
- Automatically starts up the connected equipment upon the return of utility power
$2,950.92Low Price Guarantee - $2,938.00SKU: SMX3000RMLV2U
APC SMX3000RMLV2U Smart-UPS X 3000VA Rack/Tower LCD 100-127V
- Instant backup battery power during an outage
- Protects electronic equipment from harmful power conditions
- Three switchable outlet groups for individual load management
- Pure sine wave output while on battery
- Ability to add external battery packs for extended runtime
$2,938.00Low Price Guarantee - $2,927.00SKU: T3M77LXK1DV
Altronix T3M77LXK1DV 16-Door Altronix/Mercury Access and Power Integration Wired Kit
- Fusing: 5A / 250V
- Voltage: 24VDC
- Current: 10A @ 24VDC continuous max
- Other: Overvoltage protection. Filtered and regulated
- Capacity: 12AH/12VDC (Up to 2 within enclosure) 40AH/65AH (requires separate enclosure)
$2,927.00Low Price Guarantee - $2,924.00SKU: T3M77CK1D
Altronix T3M77CK1D T3MK7716SD/K1/EFLOW/PTC/115V
- 24VDC power supply/chargers
- Accommodates the following Mercury controllers: Mercury: LP1501, LP1502, LP2500, LP4502, MR16IN, MR16OUT, MR50, MR52, MR62e, MUX8
- Convenient knockout configuration
- One (1) single knockout 2.415″ (2″ Conduit)
- One (1) double knockout 1.948″ (1.5″ Conduit) / 1.701″ (1.25″ Conduit)
$2,924.00Low Price Guarantee - $2,917.66SKU: D200M-277-4803YT
Ditek D200M-277-4803YT Surge Protection 277/480 VAC, 3 Phase WYE with Integral Disconnect, 4W(+G), 200kA, SPD Type 1, UL1449 Listed
- 200,000 Amp Surge Current Rating Per Phase, 100,000 Amps Per Mode, Ensures Long Service Life
- Compact Size Enables Close Mounting to Protected Panel, Minimizing Wire Length and Maximizing Performance
- Diagnostic LED Indicates System Power, SPD Function, Alarm and Ground Status
- Dry Contacts for Remote Monitoring of Surge Protection Status
$2,917.66Low Price Guarantee - $2,879.50SKU: T3M77LCK3D
Altronix T3M77LCK3D 16-Door Altronix/Mercury Access and Power Integration Kit
- Main Fuse: 5A / 250V
- Voltage: 24VDC
- Current: 10A @ 24VDC continuous max
- Other: Overvoltage protection. Filtered and regulated
- Capacity: 12AH /12VDC (2 within enclosure), 40 AH / 65 AH (requires separate enclosure)
$2,879.50Low Price Guarantee - $2,879.50SKU: T3M77LCK3
Altronix T3M77LCK3 16-Door Altronix/Mercury Access and Power Integration Kit
- Main Fuse: 5A / 250V
- Voltage: 24VDC
- Current: 10A @ 24VDC continuous max
- Other: Overvoltage protection. Filtered and regulated
- Capacity: 12AH /12VDC (2 within enclosure), 40 AH / 65 AH (requires separate enclosure)
$2,879.50Low Price Guarantee - $2,811.61$2,811.61Low Price Guarantee
- $2,776.57SKU: SRT1500RMXLA-NC
APC SRT1500RMXLA-NC Smart-UPS SRT 1500VA RM 120V Network Card
- Provides tight voltage and frequency regulation
- Hot-swap user replaceable batteries ensure continuous operation of the load
- New LCD interface provides easy access for configuration and monitoring of your equipment
- Smart Battery technology provides early notification about battery replacement. Information shown on LCD display
- Pre-installed Network Management Card with Environmental Monitoring allows for remote monitoring
$2,776.57Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.
Filter
Shopping Options
