Power
- $924.50SKU: T2PXK78D
Altronix T2PXK78D 8-Door Altronix/Paxton Access and Power Integration Kit
- Voltage: 115VAC, 60Hz, 4.2A max
- Failover: Upon AC loss, instantaneous
- DC Output: Powered
- Battery: Discharged or not connected
- Output PTCs: 2.5A
$924.50Low Price Guarantee - $919.95SKU: NETWAYSP4BTPL
Altronix NETWAYSP4BTPL Dual 1G Fiber Optic SFP, 4-Ports 10/100/1000 802.3bt 4PPoE
- Voltage: 115VAC, 60Hz, 1.8A or 230VAC, 50/60Hz, 1A
- Fusing: 5A/250V
- Four (4) PoE ports rated at 90W each, 240W total power
- IEE 802.3bt (90W) compliant
- Four (4) 10/100/1000 Mbps ports
$919.95Low Price Guarantee - $917.56SKU: DTK-UPS1500RE
Ditek DTK-UPS1500RE On-Line UPS 1500VA/900W 120V, 15A Rack Mount with Ethernet Card & Rail Kit
- Invisible transitioning between AC and battery
- Software provided for remote monitoring
- USB and ethernet interfaces available
$917.56Low Price Guarantee - $916.92SKU: SMX48RMBP2U
APC SMX48RMBP2U Smart-UPS X-Series 48V External Battery Pack Rack/Tower
- Hot-swap Batteries to Extend Useful Life
- Plug-and-play Installation of Battery Packs
- Optimal Battery Backup Performance
- Scalable Runtime Option
- Flexible Physical Configuration
$916.92Low Price Guarantee - $914.95SKU: T2MK78D
Altronix T2MK78D 8-Door Altronix/Mercury Access and Power Integration Kit - Trove2M2 with AL1024ULXB2, ACM8CB, VR6, PDS8CB
- Voltage: 24VDC
- Current: 10A @ 24VDC continuous max
- Other: Overvoltage protection. Filtered and regulated
- Capacity: 12AH /12VDC (2 within enclosure), 40 AH / 65 AH (requires separate enclosure)
- Type: Sealed lead acid or gel type
$914.95Low Price Guarantee - $913.90$913.90Low Price Guarantee
- $912.50SKU: MAXFIT33FD
Altronix MAXFIT33FD 6Amp 12VDC/24VDC Access Control Power Supply in UL Listed Indoor
- 6Amp 12VDC/24VDC Access Control Power Supply in UL Listed Indoor
- 16.5″ W x 20.5″ H x 6.25″ D Steel Electrical Enclosure
$912.50Low Price Guarantee - $911.08SKU: T2CVK33F10
Altronix T2CVK33F10 Trove2 Series 10-Door CDVI Access and Power Integration Kit
- 10-DR, 12A, PTC
$911.08Low Price Guarantee - $909.92SKU: E1500RTXL2UNC
Minuteman E1500RTXL2UNC 1500 VA Line Interactive Rack/Wall/Tower UPS with 8 outlets
- 1500 VA 1200W
- 8 Outlets
- DB-9, USB, Dry contact ports
$909.92Low Price Guarantee - $908.41SKU: MAXIMAL33FD
Altronix MAXIMAL33FD 16 PTC Class 2 Relay Outputs Access Power Controller with Power Supply/Chargers, BC800 Enclosure
- 120VAC 60Hz, 7.0 amp input
- Sixteen (16) Access Control System trigger inputs
- 12VDC and/or 24VDC outputs
- Power-limited outputs
- Sixteen (16) auxiliary power outputs (unswitched) (outputs are rated 2.5 amp)
$908.41Low Price Guarantee - $908.00SKU: RPM208N1LCD-L20P
Minuteman RPM208N1LCD-L20P Managed Power Distribution Module, NEMA L5-20P 8 Outlets, 10ft Cord
- IP-addressable Remote Power Manager
- Built-in Web Server to support Remote Power Management
- Event Notifications via Email or SNMP Traps
- Local LCD displays Amps, IP Address, Temperature and/or Humidity
- Daily, Weekly, Monthly & Yearly Power Consumption Data
$908.00Low Price Guarantee - $906.03SKU: MAXIMAL77D
Altronix MAXIMAL77D Access Power Controller w/ Power Supply/Chargers, 16 PTC Class 2 Relay Outputs
- 115VAC 60Hz, 8.8 amp input
- 24VDC outputs
- Class 2 Rated power limited outputs
- Sixteen (16) independently controlled outputs can be Fail-Safe and/or Fail-Secure power outputs
- Sixteen (16) auxiliary power outputs (unswitched) (outputs are rated 2 amp)
$906.03Low Price Guarantee - $903.98SKU: MAXIMAL11F
Altronix MAXIMAL11F 16 Fused Relay Outputs Access Power Controller with Power Supply/Chargers, BC800 Enclosure
- 120VAC 60Hz, 7.0 amp input
- Sixteen (16) Access Control System trigger inputs
- 12VDC and/or 24VDC outputs
- Power-limited outputs
- Sixteen (16) independently controlled outputs
$903.98Low Price Guarantee - $903.98SKU: MAXIMAL11FD
Altronix MAXIMAL11FD 16 PTC Class 2 Relay Outputs Access Power Controller with Power Supply/Chargers, BC800 Enclosure
- 120VAC 60Hz, 7.0 amp input
- Sixteen (16) Access Control System trigger inputs
- 12VDC and/or 24VDC outputs
- Power-limited outputs
- Sixteen (16) independently controlled outputs can be Fail-Safe and/or Fail-Secure power outputs
$903.98Low Price Guarantee - $900.21SKU: FPO75-B100C4D8PE
Panasonic FPO75-B100C4D8PE 4 Door Access Control Power Supply
- Pre-installed wire harness for panel power, lock control, faults and tamper switch
- Point to point wiring; labeled, color coded, twisted pair, shielded communication
- Tie wrap or Panduit wire duct cable management options
- Managed systems monitor power, batteries and (8) eight outputs
- UL294, ULC S319 joint LSP / Mercury integrated listing
$900.21Low Price Guarantee - $899.00SKU: BP36CRTXL
Minuteman BP36CRTXL Extended Runtime Battery Pack for EXR750RT2U(NC), EXR1000RT2U(NC) and EXR1500RT2U(NC)
- Extended runtime battery pack for EXR750RT2U(NC), EXR1000RT2U(NC), and EXR1500RT2U(NC)
- Rack/tower/optional wallmount
- Built-in battery charger
$899.00Low Price Guarantee - $897.00SKU: RPM208N1LCD-IEC
Minuteman RPM208N1LCD-IEC Managed Power Distribution Module, IEC320 C19 NEMA 8 Outlets, 10ft Cord
- IP-addressable Remote Power Manager
- Built-in Web Server to support Remote Power Management
- Event Notifications via Email or SNMP Traps
- Local LCD displays Amps, IP Address, Temperature and/or Humidity
- Daily, Weekly, Monthly & Yearly Power Consumption Data
$897.00Low Price Guarantee - $896.00SKU: 4502-012
DoorKing 4502-012 Replacement Circuit Board
- Genuine DKS Part: Official replacement for the DoorKing 4502-010 motherboard
- Wide Compatibility: Designed for DoorKing models 6050, 6100, and 6300 manufactured before January 2016
- Reliable Performance: Ensures efficient and precise operation of compatible gate operators
- Seamless Integration: Easy to install within existing DoorKing systems
- Durable Construction: Engineered for long-lasting use under demanding conditions
$896.00Low Price Guarantee - $895.95SKU: T2SK78
Altronix T2SK78 8-Door Altronix/Software House Access and Power Integration Kit - Trove2SH2 with AL1024ULXB2, ACM8, VR6, PDS8, RSB2
- Voltage: 24VDC
- Current: 10A @ 24VDC continuous max
- Other: Overvoltage protection. Filtered and regulated
- Capacity: 12AH /12VDC (2 within enclosure), 40 AH / 65 AH (requires separate enclosure)
- Type: Sealed lead acid or gel type
$895.95Low Price Guarantee - $889.95SKU: T1M1LCK1
Altronix T1M1LCK1 4-Door Altronix/Mercury Access and Power Integration Kit
- Voltage: 115VAC, 60Hz, 3.5A max
- Fuse Rating: 15A/32V
- Input: 115VAC is present
- DC Output: Powered
- DC Output: Eight (8) individual output LEDs
$889.95Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.




















