Power
- $1,186.83SKU: AP8861
APC AP8861 NetShelter Rack Power Distribution Unit, Metered, 0 Unit
- Ideal for colocation, large data centers or distributed IT sites
- Plan capacity and balance loads with +/- 3% metering accuracy (amps, volts, kW, kWh)
- Real-time remote monitoring of connected load through EcoStruxureTM IT and other platforms
- Stay on top by defining alarm thresholds in order to avoid overloaded circuits
- 1-Year Secure Network Management Card subscription included
$1,186.83Low Price Guarantee - $1,186.83SKU: AP7901B
APC AP7901B Rack PDU, Switched, 1U, 20A, 120V
- 8 x NEMA 5-20R Outlets
- 1 x NEMA L5-20P Input Connection
- Base-T Ethernet & RJ12 Serial Interface
- 1900VA Load Capacity
- 20A Maximum Input Current
$1,186.83Low Price Guarantee - $1,184.50SKU: T2MK7516
Altronix T2MK7516 16-Door Altronix/Mercury Access and Power Integration Kit - Trove2M2 with AL1024ULXB2, AL1012ULXB, 2-ACM8, PD16W
- Voltage: 12VDC
- Current: 10A @ 12VDC continuous max
- Other: Overvoltage protection. Filtered and regulated
- Capacity: 12AH /12VDC (2 within enclosure); 40 AH / 65 AH (requires separate enclosure)
- Type: Sealed lead acid or gel type
$1,184.50Low Price Guarantee - $1,184.50SKU: T2MK7516D
Altronix T2MK7516D 16-Door Altronix/Mercury Access and Power Integration Kit - Trove2M2 with AL1024ULXB2, AL1012ULXB, 2-ACM8CB, PD16WCB
- Voltage: 24VDC
- Current: 10A @ 24VDC continuous max
- Other: Overvoltage protection. Filtered and regulated
- Capacity: 7AH /12VDC (4 within enclosure); 40 AH / 65 AH (requires separate enclosure)
- Type: Sealed lead acid or gel type
$1,184.50Low Price Guarantee - $1,182.82SKU: VLS-LS-B8
Veracity VLS-LS-B8 Longspan Base 8, 8 Channel, Long-Range Ethernet & PoE Extender
- 8-ch LONGSPAN Base rack-mountable unit (32ch in 1U)
- Four x 70W ports plus four x 30W ports
- Long-range 100-BaseTX Ethernet with POE to 820 metres
- Integrated network switch saves on main switch ports
- Compatible with LONGSPAN and LONGSPAN Max Camera unit
$1,182.82Low Price Guarantee - $1,179.50$1,179.50Low Price Guarantee
- $1,178.70SKU: T2SSK75F14
Altronix T2SSK75F14 14-Door Access and Power Integration Kit
- 24VDC and 12VDC power supply/chargers
- Accommodates S2-INST Installation Kit
- 16 AWG galvanized steel backplane simplifies board layout and wire management
- CE European Conformity
- Enclosure accommodates up to four (4) 12VDC/12AH batteries
$1,178.70Low Price Guarantee - was $1,405.21 Special Price $1,174.00SKU: T2MK3F8AQ
Altronix T2MK3F8AQ 8-Door Access and Power Integration Kit
- 8-Door Access and Power Integration Kit
was $1,405.21 Special Price $1,174.00Low Price Guarantee - $1,158.25SKU: BM0085
Minuteman BM0085 Replacement Battery Module for BP72V24RTEXL
- Replacement Battery Module for BP72V24RTEXL
$1,158.25Low Price Guarantee - $1,153.24SKU: AP7516
APC AP7516 Rack Power Distribution Unit, Basic, 1 Unit, 14.4KW, 208V, (6) C19
- Features 6 C19 outlets for comprehensive power distribution
- 1 U design for efficient use of rack space
- Supports up to 50A, 208V power distribution
- Includes toolless mounting kit for quick setup
$1,153.24Low Price Guarantee - $1,150.00SKU: BPS-12-15
Securitron BPS-12-15 15AMP 12VDC Power Supply
- 1, 4 or 8 polyswitch (PTC) 2A circuit breakers based on model
- LEDs monitor zone status (voltage, no voltage)
- Sealed lead acid-gel battery charging capability (battery not included)
- Rugged steel enclosure
- BPS UL Listed
$1,150.00Low Price Guarantee - $1,147.07SKU: MIC-IPIR-PS-115
Bosch MIC-IPIR-PS-115 IP Power Supply for MIC Series w/ IR, 115VAC
- Easy-to-install, IP67-rated enclosure has high tolerance to vibration/shock for both indoor and outdoor installations
- Supports optional, user-installed Bosch Ethernet fiber optic
- Local storage on SD or SDHC card (32 GB maximum) for flexible recording options
- Works with MIC550IR Series Cameras
$1,147.07Low Price Guarantee - $1,142.92SKU: SMX120BP
APC SMX120BP Smart-UPS X 120V External Battery Pack Rack/Tower
- Hot-swappable batteries
- Intelligent battery management
- Rack/Tower convertible
- Scalable runtime
- User-replaceable batteries
$1,142.92Low Price Guarantee - was $1,152.00 Special Price $1,141.00SKU: T2KSK7F12
Altronix T2KSK7F12 12-Door Access and Power Integration Kit Includes Trove2KS2 with eFlow104NB, ACMS8, VR6, PDS8, ACM4
- 24VDC power supply/charger
- Accommodates up to three (3) Keri Systems NXT-2D-MSCNE, NXT-4D-MSCNE or NXT-4X4NE boards
- 16 AWG galvanized steel backplane simplifies board layout and wire management
- CE European Conformity
- Enclosure accommodates up to four (4) 12VDC/12AH batteries
was $1,152.00 Special Price $1,141.00Low Price Guarantee - $1,129.00SKU: EXR750RT2UNC
Minuteman EXR750RT2UNC EXR Line Interactive Uninterruptible Power Supply with SNMP Communication Card
- 0.9 power factor - increased capacity without migrating to larger models
- NEW Alphanumeric LCD Dot Matrix display - easy access to key UPS statuses
- UPS configuration options via front panel - make key adjustments utilizing the front panel LCD
- Load shedding - two power banks allow equipment prioritizing for increased runtime
- Independent Battery Bypass - provides voltage regulation with surge and spike protection even when batteries are weak or dead
$1,129.00Low Price Guarantee - $1,125.34SKU: T2ZK7F8
Altronix T2ZK7F8 8-Door Access and Power Integration Kit
- 24VDC power supply/charger
- Accommodates up to two (2) ZKTeco modules
- 16 AWG galvanized steel backplane simplifies board layout and wire management
- CE European Conformity
- Enclosure accommodates up to four (4) 12VDC/12AH batteries
$1,125.34Low Price Guarantee - $1,120.80SKU: NETWAY8BT
Altronix NETWAY8BT Network Managed 802.3bt 4PPoE Midspan, 8-Port, 10/100/1000, Battery Charging, 115/230VAC
- IEEE 802.3af (15W), IEEE 802.3at (30W) and IEEE802.3bt compliant
- 90W maximum power per port (not to exceed 480W total)
- Eight (8) ports for cameras/edge devices over ethernet
- Speed: 10/100/1000 Mbps
- Port status LEDs
$1,120.80Low Price Guarantee - was $1,338.35 Special Price $1,118.00SKU: T2SAK5F10Q
Altronix T2SAK5F10Q 10-Door Access and Power Integration Kit
- 10-Door Access and Power Integration Kit
was $1,338.35 Special Price $1,118.00Low Price Guarantee - $1,116.00SKU: T2KSK712
Altronix T2KSK712 12-Door Altronix/Keri Systems Access and Power Integration Kit
- Voltage: 115VAC 60Hz, 4.2A max
- Failover: Upon AC loss, instantaneous
- DC Output: Powered
- Battery: Discharged or not connected
- Four (4) auxiliary power outputs (unswitched)
$1,116.00Low Price Guarantee - $1,114.95SKU: MAXFIT7F16DAPQ
Altronix MAXFIT7F16DAPQ Access Power Controller Kit - BC300 Enclosure Indoor 13” W x 13.5” H x 3.25” D
- Available with 1, 8 or 16 outputs
- Fused outputs or PTC protected Class 2 power-limited outputs
- Additional aux. Class 2 power-limited output rated @ 1A
- Overvoltage protection
- Fire alarm disconnect
$1,114.95Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.
Filter
Shopping Options
