Power
- was $2,333.15 Special Price $1,910.00SKU: T2MTT8K1D
Altronix T2MTT8K1D 8-Door Altronix/Mercury Access and Power Integration Wall Mount Kit Includes (2) NetWay1BT
- 8-Door Altronix/Mercury Access and Power Integration wall mount kit includes two (2) NetWay1BT
- Supports up to four (4) LP1502, LP4502, LP2500, MR52, MR16IN, MR16OUT, MUX8 or five (5) LP1501, MR62e or two (2) MR50
- Unit includes PoE Driven Power Supplies (12/24VDC@150W) and Sub-Assemblies eight (8) Fail-Safe / Fail-Secure outputs and eight (8) aux outputs (PTC), tamper switch, and mounting hardware
was $2,333.15 Special Price $1,910.00Low Price Guarantee - was $2,333.15 Special Price $1,910.00SKU: T2MTT8K1
Altronix T2MTT8K1 8-Door Altronix/Mercury Access and Power Integration Wall Mount Kit Includes (2) NetWay1BT
- 8-Door Altronix/Mercury Access and Power Integration wall mount kit includes two (2) NetWay1BT
- Supports up to four (4) LP1502, LP4502, LP2500, MR52, MR16IN, MR16OUT, MUX8 or five (5) LP1501, MR62e or two (2) MR50
- Unit includes PoE Driven Power Supplies (12/24VDC@150W) and Sub-Assemblies eight (8) Fail-Safe / Fail-Secure outputs and eight (8) aux outputs (Fused), tamper switch, and mounting hardware
was $2,333.15 Special Price $1,910.00Low Price Guarantee - was $2,055.59 Special Price $1,693.00SKU: T2M7CK1
Altronix T2M7CK1 T2MK7F8/MAG/FuseD/115VAC
- Accommodates the following Mercury controllers: EP1502, LP1502, MR52, MR16IN, MR16OUT, EP1501, LP1501, MR51e, MR62e, MR50, EP2500, LP2500, MUX8
- Convenient knockout configuration: Single 2″ diameter knockout located top center of enclosure, Sixteen (16) double knockouts (1″ and 0.75″)
- 16 AWG galvanized steel backplane simplifies board layout and wire management
- Filtered and electronically regulated outputs
- Thermal and short circuit protection with auto reset
was $2,055.59 Special Price $1,693.00Low Price Guarantee - was $786.42 Special Price $648.00SKU: TANGO8AP
Altronix TANGO8AP PoE Driven Multi-Output Power Supply/Charger With Access Power Controller, BC400 Enclosure
- Utilizes Hi-PoE (802.3bt) to simultaneously deliver 12VDC & 24VDC for powering access control and security devices
- Built-in Lithium Iron Phosphate (LiFePO4) battery charger for optimized power backup
- Operates with Altronix NetWay Midspans such as NetWay8BT
- Can be installed by any low voltage contractor
- Eight (8) independently controlled outputs
was $786.42 Special Price $648.00Low Price Guarantee - was $800.66 Special Price $660.00SKU: T1PHK3ESCK1
Altronix T1PHK3ESCK1 Trove1 8-Door Access and Power Integration Enclosure Kit with Backplane for CDVI Atrium Boards, eFlow6NB, and ACM8 for ESCS
- 16 AWG galvanized steel backplane simplifies board layout and wire management
- Supervision: AC Fail, Low Battery and Battery Presence, Low power shutdown
- Agency Listings: UL: UL294 - Access Control System, cUL: CAN/ULC - s319-05 - Electronic Access Control Systems, CE European Conformity
- Enclosure accommodates up to 2 x 12VDC/7AH batteries
- 12VDC or 24VDC power supply/charger
was $800.66 Special Price $660.00Low Price Guarantee - was $1,035.88 Special Price $854.00SKU: MAXIMAL5V
Altronix MAXIMAL5V Access Power Controller w/ Power Supply/Charger, 16 Fused Relay Relay Outputs
- Sixteen (16) auxiliary power outputs (unswitched) (outputs are rated 2.5A)
- Filtered and electronically regulated outputs (built-in power supply)
- Thermal and short circuit protection with auto reset
- Power Supply input fuse rated @ 3.5A/250V
- ACM8 boards main fuse is rated at 10A Output fuses are rated @ 3.5A
was $1,035.88 Special Price $854.00Low Price Guarantee - was $1,022.81 Special Price $844.00SKU: TANGO8AQP
Altronix TANGO8AQP TANGO1B with LINQ8ACM and PDS8 Enclosure
- TANGO1B with LINQ8ACM and PDS8 Enclosure
was $1,022.81 Special Price $844.00Low Price Guarantee - was $1,516.71 Special Price $1,252.00was $1,516.71 Special Price $1,252.00Low Price Guarantee
- was $2,135.72 Special Price $1,763.00was $2,135.72 Special Price $1,763.00Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.
Filter
Shopping Options
