Power
- $310.00SKU: CP360W-POE8P-B
ENS CP360W-POE8P-B Access Control, CCTV, Battery Charger All In One Power Box
- 8 × PoE ports power IP cameras and network devices simultaneously over Cat5/6; 8 × 12V DC outputs power door locks, electric strikes, magnetic locks, alarm panels, and other 12V DC access control hardware
- Integrated battery charger: connects to a 12V backup battery (sold separately) to maintain battery charge for uninterrupted operation during power outages — providing UPS-like battery backup for all connected devices without a separate UPS unit
- Single-box consolidation eliminates wiring complexity — all access control and CCTV power connections terminate to one location, simplifying installation, troubleshooting, and service; lockable steel box protects power circuitry from unauthorized access
$310.00Low Price Guarantee - $76.00SKU: CP12-5A-EG
ENS CP12-5A-EG Access Control Power Box, 5A, DC12-15V Adjustable Output
- Support 64/128CH 16MP/12MP/8MP/6MP/5MP/4MP/3MP/1080P/1280x1024/960P/720P/960H/D1/CIF IP input
- H.265S/H.265+/H.265/H.264 coding
- Intuitive and user-friendly Graphic User Interface ( GUI ), Windows style operation by mouse
- Multi-mode recording: manual / timed / motion / sensor/ POS / AI recording
- Playback: 16 CH simultaneous playback
$76.00Low Price Guarantee - $580.00SKU: SGP-S300W-P-V2
ENS SGP-S300W-P-V2 Sun Guardian Outdoor Power Panel Pro, 2 Pack
- 2-pack of 150W monocrystalline solar panels; total output: 300W; operating voltage: 36V; designed as the solar generation component for the ENS Sun Guardian SGP-V2 outdoor enclosure system
- Sun Guardian Outdoor Power Panel Pro: 150W × 2 panels, 36V configuration; the solar generation component designed to pair with the SGP-V2 outdoor enclosure and SGP-MAX3000P-V2 power system
- Monocrystalline silicon cells provide higher conversion efficiency per square meter than polycrystalline alternatives — maximizing energy harvest from the panel area available on a Sun Guardian pole or structure mount
- 36V panel configuration matches the SGP-V2 enclosure's MPPT charge controller input voltage specification
$580.00Low Price Guarantee - $314.00SKU: SGP-S300W-M-V2
ENS SGP-S300W-M-V2 Sun Guardian Outdoor Power Panel S300W (V2) Mount and Mounting Accessories
- Solar Panel Mounting Bracket
- Constructed from high-strength hot-dip galvanized steel
- Compatible with dual 150W solar panels (total 300W)
- Includes 2 U-shaped clamps
- Rust-resistant with protective spray coating
$314.00Low Price Guarantee - $4,119.00SKU: SGP-MAX3000P-V2
ENS SGP-MAX3000P-V2 Sun Guardian Outdoor Enclosure Pro
- Outdoor Enclosure Pro
- 25.2 V 2.5 kWh Battery
- MPPT
- MPPT gateway included (PoE switch not included)
- 12 V 48 V output
$4,119.00Low Price Guarantee - $1,669.00SKU: SGP-2800
ENS SGP-2800 Sun Guardian Outdoor Enclosure Battery For SGP-V2, 22.2V, 2800Wh
- Lithium battery module; voltage: 22.2V; capacity: 2800Wh (2.8 kWh); designed for the ENS Sun Guardian SGP-V2 outdoor enclosure solar system
- 2800Wh of battery capacity provides substantial energy storage for extended autonomous operation
- The SGP-2800 is the battery module for the SGP-V2 platform
- 22.2V lithium cell configuration matches the SGP-V2 enclosure's charge controller and power management system; do not install in enclosures with different voltage battery architectures
$1,669.00Low Price Guarantee - $4,798.00SKU: SG-GEN-MOD
ENS SG-GEN-MOD Generator Module for SG-008
- Generator integration module for the ENS SG-008 Sun Guardian solar surveillance trailer; provides the power interface and control circuit for connecting a generator as supplemental or backup charging power
- Generator charging capability fills the solar energy gap during extended cloudy periods, nighttime heavy loads, or emergency situations where the SG-008's battery is depleted faster than solar can replenish it
- Extends the SG-008's operational availability to 24/7 regardless of solar conditions when used with a compatible generator — the correct specification for long-term deployments at sites with variable or low solar resource
$4,798.00Low Price Guarantee - $1,150.00SKU: SG-BATTERY
ENS SG-BATTERY Sun Guardian Solar Trailer Max Battery, 200Ah DC12V
- Deep-cycle battery; 12V DC; 200Ah capacity; designed for ENS Sun Guardian solar surveillance trailer systems with 12V DC electrical architecture
- 200Ah capacity at 12V provides substantial energy reserve for off-grid surveillance equipment — sufficient to power typical IP camera and network equipment loads through multiple nights between solar charge cycles, depending on total system draw
- Deep-cycle design
- Replacement battery for Sun Guardian solar trailer systems using 12V DC battery banks
$1,150.00Low Price Guarantee - $3,999.00SKU: SG-8000
ENS SG-8000 Battery for SG-008, 314Ah, 25.6V
- LiFePO4 (lithium iron phosphate) battery; voltage: 25.6V; capacity: 314Ah; approximately 8 kWh of energy storage; OEM replacement battery for the ENS SG-008 Sun Guardian solar surveillance trailer
- LiFePO4 chemistry: superior to lead-acid in energy density, cycle life (2,000–4,000+ cycles vs. 200–500 for lead-acid), depth of discharge (up to 80% vs. 50% for lead-acid), and operating temperature range — the correct chemistry for outdoor solar surveillance trailer applications
- 25.6V (8S LiFePO4) configuration matches the SG-008's electrical system design
$3,999.00Low Price Guarantee
Power Supply Frequently Asked Questions
What is a power supply for surveillance cameras?
A power supply for surveillance cameras is a device that provides the necessary electrical power to operate the cameras. It converts the electrical voltage from a wall outlet to the specific voltage required by the cameras, ensuring they function correctly and consistently.
How do I choose the right power supply for my surveillance system?
To choose the right power supply, consider the voltage and current requirements of your surveillance cameras. Check the specifications to ensure compatibility. Additionally, factor in the number of cameras you will be connecting to the power supply to ensure it can handle the total load.
What is the difference between a standard power supply and a UPS for surveillance systems?
A standard power supply provides continuous power to surveillance cameras, while an uninterruptible power supply (UPS) offers backup power during outages. A UPS ensures that cameras remain operational during power failures, providing added security and preventing data loss.
Can I use a power supply with multiple cameras?
Yes, you can use a power supply with multiple cameras, provided it has enough power output to support the total current draw of all connected cameras. It is essential to check the power supply's specifications and the cameras' requirements to ensure proper functionality.
What should I do if my surveillance camera is not getting power?
If your surveillance camera is not getting power, first check the power supply connections to ensure they are secure. Verify that the power supply is functioning correctly and providing the required voltage. If issues persist, consider inspecting the camera for faults or refer to the manufacturer’s warranty page for further assistance.
Filter
Shopping Options
